1. DL manuals
  2. IBall Baton
  3. Wireless Router
  4. iB-WRA150N
  5. User Manual

IBall Baton iB-WRA150N User Manual

Other manuals for iB-WRA150N: User Manual
Manual is about: 150M Wireless-N ADSL2+ Router

Summary of iB-WRA150N

  • Page 1

    150m wireless-n adsl2+ router model no. :ib-wra150n user guide ver. 2.0.0

  • Page 2

    Fcc statement this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses a...

  • Page 3: Contents

    Contents 150m wireless-n adsl2+ router............................................................................ 1 model no. Ib-wra150n............................................................................................ 1 package contents ......................................................

  • Page 4

    4.4.6 adsl ....................................................................................................... 50 4.5 access management ...........................................................................50 4.5.1 acl............................................................................

  • Page 5: Package Contents

    Ib-wra150n 150m wireless-n adsl2+ router user guide 1 package contents the following contents should be found in your package: ¾ one ib-wra150n 150m wireless n adsl2+ router ¾ one power adapter for ib-wra150n 150m wireless n adsl2+ router ¾ quick installation guide ¾ one rj45 cable ¾ two rj11 cables...

  • Page 6: Chapter 1. Introduction

    Ib-wra150n 150m wireless-n adsl2+ router user guide chapter 1. Introduction thank you for choosing the ib-wra150n 150m wireless n adsl2+ router. 1.1 product overview the device is designed to provide a simple and cost-effective adsl internet connection for a private ethernet or ieee 802.11n/ ieee 80...

  • Page 7

    Ib-wra150n 150m wireless-n adsl2+ router user guide 1.2 main features ¾ complies ieee 802.11n wireless technology to provide a wireless data rate of up to 150mbps ¾ 3-in-1: one rj11(internet) line port, four 10/100m auto-negotiation (rj45) lan ports supporting auto mdi/mdix and wireless-n access poi...

  • Page 8

    Ib-wra150n 150m wireless-n adsl2+ router user guide chapter 2. Hardware installation 2.1 the front panel figure 2-1 the leds locate on the front panel. They indicate the device’s working status. For details, please refer to led explanation. Led explanation: name status indication on power is on. Pwr...

  • Page 9

    Ib-wra150n 150m wireless-n adsl2+ router user guide 2.2 the back panel figure 2-2 ¾ power: the power plug is where you will connect the power adapter. ¾ on/off: switch for the power. ¾ reset: there are two ways to reset the router's factory defaults. Method one: with the router powered on, use a pin...

  • Page 10

    Ib-wra150n 150m wireless-n adsl2+ router user guide 2.3 installation environment ¾ the product should not be located where it will be exposed to moisture or excessive heat. ¾ place the router in a location where it can be connected to the various devices as well as to a power source. ¾ make sure the...

  • Page 11

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 2-3 7.

  • Page 12

    Ib-wra150n 150m wireless-n adsl2+ router user guide chapter 3. Quick installation guide 3.1 configure pc after you directly connect your pc to the ib-wra150n or connect your adapter to a hub/switch which has connected to the router, you need to configure your pc’s ip address. Follow the steps below ...

  • Page 13

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 3-2 step 3: select general tab, highlight internet protocol (tcp/ip), and then click the properties button. Figure 3-3 9.

  • Page 14

    Ib-wra150n 150m wireless-n adsl2+ router user guide step 4: configure the ip address as figure 3-4 shows. After that, click ok. Figure 3-4 ) note: you can c onfigure the pc to get an ip address automatically, select “obtain an ip address automatically” and “obtain dns server address automatically” i...

  • Page 15

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 3-5 if the result displayed is similar to the screen shown below, it means that your pc has not connected to the router. Figure 3-6 you can check it follow the steps below: 1) is the connection between your pc and the router correct? The led...

  • Page 16

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 3-7 step 1: select the quick start tab, then click run wizard, and you will see the next screen. Click the next button. Figure 3-8 step 2: configure the time for the router, and then click the next button. Figure 3-9 step 3: select the conne...

  • Page 17

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 3-10 step 4: configure the following options provided by your isp: username, password, vpi, vci and connection type. Then click next. Figure 3-11 step 5: configure the rules for the wlan, and click next. 13.

  • Page 18

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 3-12 ) note: if the access point is activated, the wireless function will be available even without the external antenna because of an additional printed antenna. To adopt the wireless security protection measures, please refer to section 4....

  • Page 19

    Ib-wra150n 150m wireless-n adsl2+ router user guide chapter 4. Software configuration this user guide recommends using the “quick installation guide” for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequately, maybe you will g...

  • Page 20

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 4-2 ) note: click the other submenus system log or statistics in figure 4-2, and you will be able to view the system log and traffic statistics about the router. 4.1.2 system log choose “status→system log” menu, and you will be able to query...

  • Page 21

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 4-3 the router can keep logs of all traffic. You can query the logs to find what happened to the router. Click the clear log button to clear the logs. Click the save log button to save the logs. 4.1.3 statistics choose “status→statistics” me...

  • Page 22

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 4-4 ¾ interface: you can select ethernet, adsl and wlan to view the corresponding network traffic over different ports. ¾ select ethernet, and youwillsee the statistics table as below. Statistics table: transmit frames the frames transmitted...

  • Page 23

    Ib-wra150n 150m wireless-n adsl2+ router user guide ¾ select adsl, and youwillsee the statistics table as below. Statistics table: transmit total pdus the total pdus transmitted over the adsl port. Transmit statistics transmit total error counts the total errors occurred over the adsl port when data...

  • Page 24

    Ib-wra150n 150m wireless-n adsl2+ router user guide 4.3 network setup choose “network setup”, you can see the next submenus: wan, lan and wireless. Figure 4-5 click any of them, and you will be able to configure the corresponding function. 4.3.1 wan choose “network setup→wan” menu, you can configure...

  • Page 25

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 4-6 ¾ atm vc: atm settings are used to connect to your isp. Your isp provides vpi (virtual path identifier), vci (virtual channel identifier) settings to you. In this device, you can totally setup 8 vcs on different encapsulations, if you ap...

  • Page 26

    Ib-wra150n 150m wireless-n adsl2+ router user guide • vci: identifies the virtual channel endpoints in an atm network. The valid range is from 32 to 65535 (1 to 31 is reserved for well-known protocols). Please input the value provided by your isp. • pvcs summary: click the button, and you can view t...

  • Page 27

    Ib-wra150n 150m wireless-n adsl2+ router user guide ¾ dynamic route: select this option to specify the rip (routing information protocol) version for wan interface, including rip1, rip2-b and rip2-m. Rip2-b and rip2-m are both sent in rip2 format, the difference is that rip2-m using multicast, while...

  • Page 28

    Ib-wra150n 150m wireless-n adsl2+ router user guide 3) pppoa/pppoe select this option if your isp requires you to use a pppoe connection. This option is typically used for dsl services. Select dynamic pppoe to obtain an ip address automatically for your pppoe connection. Select static pppoe to use a...

  • Page 29

    Ib-wra150n 150m wireless-n adsl2+ router user guide ¾ connection: for pppoe/pppoa connection, you can select always on or connect on-demand or connect manually. Connect on demand is dependent on the traffic. If there is no traffic (or idle) for a pre-specified period of time), the connection will te...

  • Page 30

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 4-11 ¾ router local ip: these are the ip settings of the lan interface for the device. These settings may be referred to as private settings. You may change the lan ip address if needed. The lan ip address is private to your internal network...

  • Page 31

    Ib-wra150n 150m wireless-n adsl2+ router user guide • multicast: select igmp version, or disable the function. Igmp (internet group multicast protocol) is a session-layer protocol used to establish membership in a multicast group. The adsl atu-r supports both igmp version 1 (igmp v1) and igmp v2. Se...

  • Page 32

    Ib-wra150n 150m wireless-n adsl2+ router user guide • dns relay: if you want to disable this feature, you just need to set both primary and secondary dns ip to 0.0.0.0. If you want to use dns relay, you can setup dns server ip to 192.168.1.1 on their computer. If not, the device will perform as no d...

  • Page 33

    Ib-wra150n 150m wireless-n adsl2+ router user guide 4.3.3 wireless choose “network setup→wireless” menu, and you will see the wireless screen (shown in figure 4-14 ). Please configure the parameters for wireless according to the descriptions below. Figure 4-14 29.

  • Page 34

    Ib-wra150n 150m wireless-n adsl2+ router user guide ¾ access point settings: these are the settings of the access point. You can configure the rules to allow wireless-equipped computers and other devices to communicate with a wireless network. • access point: select activated to allow wireless stati...

  • Page 35

    Ib-wra150n 150m wireless-n adsl2+ router user guide • channel bandwidth: select the bandwidth you want to use from the drop-down list. There are two options, “20 mhz” and “20/40 mhz”. If bigger bandwidth is selected, device could transmit and receive data with higher speed. • extension channel: if “...

  • Page 36

    Ib-wra150n 150m wireless-n adsl2+ router user guide • authentication type: select an authentication type from the drop-down list, which allows you to configure security features of the wireless lan interface. Options available are: disabled, wep-64bits, wep-128bits, wpa-psk, wpa2-psk, and wpa-psk/ w...

  • Page 37

    Ib-wra150n 150m wireless-n adsl2+ router user guide 3) wpa-psk to configure wpa-psk settings, select the wpa-psk option from the drop-down list. The menu will change to offer the appropriate settings. Wpa-psk requires a shared key and does not use a separate server for authentication. Psk keys can b...

  • Page 38

    Ib-wra150n 150m wireless-n adsl2+ router user guide 5) wpa-psk/wpa2-psk to configure wpa-psk/wpa2-psk settings, select the wpa-psk/wpa2-psk option from the drop-down list. The menu will change to offer the appropriate settings. Wpa-psk/wpa2-psk requires a shared key and does not use a separate serve...

  • Page 39

    Ib-wra150n 150m wireless-n adsl2+ router user guide method one: step 1: press the wps button on the front panel of the router or click start wps button in figure 4-21. Step 2: press and hold the wps button of the adapter directly for 2 or 3 seconds. Step 3: wait for a while until the next screen app...

  • Page 40

    Ib-wra150n 150m wireless-n adsl2+ router user guide the wps configuration screen of wireless adapter step 3: wait for a while until the next screen appears. Click finish to complete the wps configuration. The wps configuration screen of wireless adapter 36.

  • Page 41

    Ib-wra150n 150m wireless-n adsl2+ router user guide 2) pin code if the wireless adapter supports wi-fi protected setup and the pin method, you can add it to the network by pin with the following two methods. Click pin code, you will see the screen as shown below. Figure 4-22 method one: enter the pi...

  • Page 42

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 4-23 method two: enter the pin from my router step 1: get the current pin code of the router from ap self pin code in figure 4-23 (each router has its unique pin code. Here takes the pin code 00745659 of this router for example). Step 2: for...

  • Page 43

    Ib-wra150n 150m wireless-n adsl2+ router user guide • ssid: wireless network name shared among all points in a wireless network. The ssid must be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32 characters (use any of the characters on the keyboard). Mak...

  • Page 44

    Ib-wra150n 150m wireless-n adsl2+ router user guide 4.4.1 firewall choose “advanced setup→firewall” menu, and you will see the next screen (shown in figure 4-25). Figure 4-25 ¾ firewall: select this option can automatically detect and block denial of service (dos) attacks, such as ping of death, syn...

  • Page 45

    Ib-wra150n 150m wireless-n adsl2+ router user guide click add route button to add a new route in the next screen (shown in figure 4-27). Figure 4-27 ¾ destination ip address: this parameter specifies the ip network address of the final destination. ¾ ip subnet mask: enter the subnet mask for this de...

  • Page 46

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 4-28 ¾ virtual circuit: enter virtual circuit index that you plan to setup for the nat function. ¾ nat status: this field shows the current status of the nat function for the current vc. You can go to the previous screen (shown in figure 4-6...

  • Page 47

    Ib-wra150n 150m wireless-n adsl2+ router user guide 4.4.3.2. Virtual server choose “advanced setup→nat→virtual server” in figure 4-28, you can configure the virtual server in the next screen. The virtual server is the server or server(s) behind nat (on the lan), for example, web server or ftp server...

  • Page 48

    Ib-wra150n 150m wireless-n adsl2+ router user guide to add a virtual server entry: step 1: select the “virtual circuit” and select “ virtual server”. ) note: for vcs with single ip, select single; for vcs with multiple ips, select multiple for the option. Step 2: select the rule index for the rule a...

  • Page 49

    Ib-wra150n 150m wireless-n adsl2+ router user guide ¾ rule index: select the virtual server rule index for this vc. You can specify 8 rules in maximum. ¾ rule typ: there are four types: one-to-one, many-to-one, many-to-many overload and many-to-many no-overload. ¾ local start & end ip: enter the loc...

  • Page 50

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 4-32 ¾ qos: select this option to activate/deactivate the ip qos on different types (ip tos and diffserv). ¾ summary: click the button to view the configurations of qos. ¾ rule: configure the rules for qos. If the traffic complies with the r...

  • Page 51

    Ib-wra150n 150m wireless-n adsl2+ router user guide • source mac & ip & mask & port range: enter the ip information about the source host for the rule. • protocol id: select one among tcp/udp, tcp, udp or icmp protocols for the application. • vlan id range: enter the vlan range, and the rule will be...

  • Page 52

    Ib-wra150n 150m wireless-n adsl2+ router user guide 4.4.5 vlan choose “advanced setup→vlan” menu, you can activate the vlan function in the next screen. Virtual lan (vlan) is a group of devices on one or more lans that are configured so that they can communicate as if they were attached to the same ...

  • Page 53

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 4-34 ¾ pvid: each physical port has a default vid called pvid (port vid). Pvid is assigned to untagged frames or priority tagged frames (frames with null (0) vid) received on this port. 2) define vlan group click define vlan group in figure ...

  • Page 54

    Ib-wra150n 150m wireless-n adsl2+ router user guide ¾ atm vcs: select the atm vcs as members of vlan, and if you leave the tagged blank, the tag in frames will be deleted when transmitted from the vc. ¾ ethernet: select the ethernet port as a member of vlan. ¾ wireless lan: select the wireless lan p...

  • Page 55

    Ib-wra150n 150m wireless-n adsl2+ router user guide 4.5.1 acl choose “access management→acl” menu, you can see the next screen (shown in figure 4-38). You can specify the client to access the adsl router once setting his ip as a secure ip address through selected applications. Figure 4-38 ¾ acl: if ...

  • Page 56

    Ib-wra150n 150m wireless-n adsl2+ router user guide 4.5.2.1. Ip filter select ip/mac filter as the filter type, and select ip as the rule type (shown in figure 4-39), then you can configure the filter rules based on ip address. The filtering includes outgoing and incoming, the detailed descriptions ...

  • Page 57

    Ib-wra150n 150m wireless-n adsl2+ router user guide ) note: if select pvc0~pvc7 as an interface, the filter will match the ip traffic of wan port with specified ips (source ip address and destination ip address). If select lan as an interface, the filter will match the ip traffic of lan port with sp...

  • Page 58

    Ib-wra150n 150m wireless-n adsl2+ router user guide to add an ip address filtering entry: for example: if you desire to block e-mail received and sent by the ip address 192.168.1.7 on your local network; and wish to make the pcs with ip address 192.168.1.8 unable to visit the website of ip address 2...

  • Page 59

    Ib-wra150n 150m wireless-n adsl2+ router user guide step 4: select the protocol as “tcp” and select the unmatched rule as “next”. Step 5: finally, click the save to save the entry. Step 6: go to step 2 to configure the next two rules: block e-mail received by the ip address 192.168.1.7 on your local...

  • Page 60

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 4-40 ¾ rule type: select mac for the mac filter rule. ¾ active: select “yes” to make the rule to take effect. ¾ mac address: enter the mac address for the rule. ¾ rule unmatched: if the current rule can not match, and you select forward, the...

  • Page 61

    Ib-wra150n 150m wireless-n adsl2+ router user guide step 2: select the ip/mac filter set index and ip/mac filter rule index for the rule, then select the interface “pvc0”, and select the direction “outgoing” for the first rule. ) note: if you want to make the rule take effect, please select yes to a...

  • Page 62

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 4-41 ¾ filter type selection: select the application filter for the next configuration. ¾ application filter: activate or deactivate the function. ¾ icq & msn & real audio/video: select allow or deny for these applications.If you select allo...

  • Page 63

    Ib-wra150n 150m wireless-n adsl2+ router user guide ¾ url index: select the index for the url filter entry. ¾ url: enter the url for this url filter. ¾ url filter listing: this displays the information about the url filter rules. To add a url filter entry: for example: if you want to forbid the user...

  • Page 64

    Ib-wra150n 150m wireless-n adsl2+ router user guide 4.5.4 upnp choose “access management→upnp” menu, you can configure the upnp in the screen (shown in figure 4-44). Upnp (universal plug and play) is a distributed, open networking standard that uses tcp/ip for simple peer-to-peer network connectivit...

  • Page 65

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 4-45 ¾ dynamic dns: activate the ddns function or not. ¾ service provider: this field displays the service provider of ddns. ¾ my host name: enter your host name here. ¾ e-mail address: enter your e-mail address here. ¾ username & password: ...

  • Page 66

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 4-46 ¾ cwmp: select activate the cwmp function. ¾ url: enter the website of acs which is provided by your isp. ¾ user name/password: enter the user name and password to login the acs server. ¾ path: enter the path that connects to the acs se...

  • Page 67

    Ib-wra150n 150m wireless-n adsl2+ router user guide 4.6.1 administration choose “maintenance→administration” menu, you can set new password for admin in the screen (shown in figure 4-48). Figure 4-48 ) note: 1) there is only one account that can access web-management interface. The default account i...

  • Page 68

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 4-49 ) note: the adsl router built-in some ntp servers, when the router connects to the internet, the router will get the system time automatically from the ntp server. You can also configure the ntp server address manually, and then the rou...

  • Page 69

    Ib-wra150n 150m wireless-n adsl2+ router user guide figure 4-51 4.6.3 firmware choose “maintenance→firmware” menu, you can upgrade the firmware of the router in the screen (shown in figure 4-52). Make sure the firmware or romfile you want to use is on the local hard drive of the computer. Click brow...

  • Page 70

    Ib-wra150n 150m wireless-n adsl2+ router user guide ) note: 1) when you upgrade the router's firmware, you may lose its current configurations, so please back up the router’s current settings before you upgrade its firmware. 2) do not turn off the router or press the reset button while the firmware ...

  • Page 71

    Ib-wra150n 150m wireless-n adsl2+ router user guide ib-wra150n figure 4-54 to restore the router’s settings: step 1: click the browse button to locate the update file for the device, or enter the exact path in “new romfile location” field. Step 2: click the upgrade button to complete. 4.6.4 sysresta...

  • Page 72

    Ib-wra150n 150m wireless-n adsl2+ router user guide 4.6.5 diagnostics choose “maintenance→diagnostics” menu, you can view the test results for the connectivity of the physical layer and protocol layer for both lan and wan sides in the screen (shown in figure 4-56). Figure 4-56 68.

  • Page 73

    Ib-wra150n 150m wireless-n adsl2+ router user guide 4.7 help choose “help”, you can view the help information for configuration of any function. Figure 4-57 ) note: click the tab, and you will be able to get the corresponding information. 69.

  • Page 74: Appendix A: Specifications

    Ib-wra150n 150m wireless-n adsl2+ router user guide appendix a: specifications general standards and protocols ansi t1.413, itu g.992.1, itu g.992.2, itu g.992.3, itu g.992.5, ieee 802.11b, ieee 802.11g, ieee 802.11n, ieee 802.3, ieee 802.3u protocols tcp/ip, pppoa, pppoe, sntp, http, dhcp, icmp, na...

  • Page 75

    Ib-wra150n 150m wireless-n adsl2+ router user guide physical and environment working temperature 0 ~ 40 ℃ ℃ working humidity 10% ~ 90% rh (non-condensing) storage temperature -40 ~ 70 ℃ ℃ storage humidity 5% ~ 90% rh (non-condensing) 71.

  • Page 76: Appendix B:

    Ib-wra150n 150m wireless-n adsl2+ router user guide appendix b: contact information note: for any technical help on iball baton products please contact support@iballbaton.Com www.Iballbaton.Com 72.