Ibanez EQA-PZ User Manual

INSTRUCTION MANUAL

I b a n e z   E D A   B a s s

Printed in KOREA    JAN01393    ©Copyright 2001

This is to certify that the aforementioned equipments fully conform

to protection requirements of the following EC council directives.

DIRECTIVES : 89/336/EEC Electromagnetic compatibility

MONO-RAIL II w/Fishman

®

Piezo

Mono-Rail II w/Fishman® Piezo bridges

allow the bass strings to be isolated fro

one another by using independent bridge

plates for each string. the strings are

installed by lowering the ball end into the

bridge and hooking the ball end below

the string catch at the rear of the bridge.

Intonation adjustments can be made by

adjusting the

i n t o n a t i o n

screws (A) at

the rear of the

bridge clockwise to move the saddle back, and

counter clockwise to move the saddle forward.

(A)

EQ Controls

The EQA-PZ system has separate EQ circuits for both the Magnetic Pickup

and the Piezo Pickup. The Magnetic EQ Circuit boosts both the bass and

treble frequencies simultaneously with a single control knob.  The Piezo

Pickup EQ Circuit is a 2-band EQ

circuit and features a Treble EQ

knob on the body and a Bass EQ trim

pot inside the control cavity. The

Bass EQ trim pot is designed for "set

and forget" use.  Turning the trim

clockwise boosts the bass

frequencies. Turning the trim

counterclockwise cuts the bass

frequencies.

Piezo Treble

Boost/Cut

Magnetic EQ

Piezo

Volume

Magnetic

Volume