Ibanez T5A5 Owner's Manual - page 10
8
EN
G
LI
SH
Troubleshooting
First check that your shielded guitar cable, speaker cable, and power
cable are connected correctly. If possible, use a tester to check the
cable or try using an alternate cable or amp to verify your cable’s
condition.
1. The power supply cannot be switched on.
•Checkthatthepowercablehasbeenconnectedcorrectly.
•Trypluggingitintoadifferentsocketandseeifthesameproblem
occurs.
2. The power supply can be switched on, but no sound is
heard.
•Checkthattheguitarhasbeenconnectedcorrectly.
•Removeanyexternalcomponentsconnectedtotheeffectsloopand
between the guitar and the amplifier and check to see if any sound
is heard.
•Use a different shielded cable and check to see if any sound is
heard.
•Checktoseeifthevolumeontheguitarissetto“0”.
•Useadifferentguitarandseeifanysoundisheard.
•Checktoseeifthevolumeontheamplifierissetto“0”.
3. Noise is heard.
•Checktoseeifanythingintheimmediatevicinityisresonatingor
banging against the amplifier to produce the noise.
•Checktoseeiftheplugcoverontheshieldedcableisloose.
•Makesurethattheaction(stringheight)ofyourguitarissetcor-
rectly.
•Useanotherguitar,effectsorotherexternalcomponents,andcable
to see if the same noise is produced.
In case of defects
This product has passed exhaustive inspections before being shipped
from the factory. Ensure that the above procedures are carried out
when a problem is thought to exist. Contact your dealer in the unlikely
event that an abnormality occurs during use. Also, ensure that the
symptoms of the problem are explained in detail when requesting repair
in order to facilitate swift handling. Because of improvements to this
product, the specifications may change without notice.