1. DL manuals
  2. IBASE Technology
  3. Network Hardware
  4. FWA6504
  5. User Manual

IBASE Technology FWA6504 User Manual

Other manuals for FWA6504: User Manual
Manual is about: 1U 19” Network Appliance

Summary of FWA6504

  • Page 1

    Fwa6504 1u 19” network appliance user s manual version a1.

  • Page 2: Table Of Contents

    Fwa6504 user’s manual 1 table of contents chapter 1 introduction ...................................................................................................................... 3 chapter 2 system specification ......................................................................................

  • Page 3: Foreword

    Fwa6504 user’s manual 2 foreword to prevent damage to the system board, please handle it with care and follow the measures below, which are generally sufficient to protect your equipment from static electricity discharge: when handling the board, use a grounded wrist strap designed for static discha...

  • Page 4: Chapter 1

    Fwa6504 user’s manual 3 chapter 1 introduction the fwa6504 was specifically designed for the network security & management market. Network security applications: • firewall • virtual private network • proxy server • caching server network management applications: • load balancing • quality of servic...

  • Page 5: Chapter 2

    Fwa6504 user’s manual 4 chapter 2 system specification product description fwa6504 incorporates intel ® nm10 chipset. Currently, it is available in the following model: model intel® atom dual core cpu watchdog timer fwa6504 atom d2550 1.86 ghz yes fwa6504 features supports four intel® 10/100/1000 la...

  • Page 6: Chapter 3

    Fwa6504 user’s manual 5 chapter 3 hardware configuration motherboard (mb837-1u) layout.

  • Page 7

    Fwa6504 user’s manual 6 the jumpers jp1: clear cmos contents use jp1 to clear the cmos contents. Note that the power connector or jack should be disconnected from the board before clearing cmos. Jp1 setting function pin 1-2 short/closed normal pin 2-3 short/closed clear cmos jp4, jp5: lan bypass & w...

  • Page 8

    Fwa6504 user’s manual 7 the connectors fan1: system fan power connector fan1 is 4-pin header for system fan power. The fan must be a 12v fan. Pin # signal name 1 ground 2 +12v 3 rotation detection 4 control cn1, cn2, cn3, cn4: 10 / 100 / 1000 lan ports cn6: com1 rj45 connector pin # signal name (rs-...

  • Page 9

    Fwa6504 user’s manual 8 j4: vga header signal name pin # pin # signal name dacr 1 2 +5vcrt dacg 3 4 gnd dacb 5 6 nc nc 7 8 crt_spd gnd 9 10 hsync_c +5vcrt 11 12 vsync_c gnd 13 14 crt_spclk gnd 15 j6:ps2 kb/ms header pin # signal name 1 kbdata 2 kbclk 3 msdata 4 msclk 5 gnd 6 +5v j7: slim type ii com...

  • Page 10

    Fwa6504 user’s manual 9 led5: power, alarm & status led pin header signal name pin # pin # signal name pwr led+ a1 c1 pwr led- alarm led+ a2 c2 sio gpio55 status led+ a3 c3 sio gpio56 sw3: software reset button signal name pin # pin # signal name gnd 1 2 pch gpio7 note: sw3 is controlled by gpio onl...

  • Page 11: Chapter 4

    Fwa6504 user’s manual 10 chapter 4 console mode information fwa6504 supports output information via console in bios level. Prepare a computer as client loaded with an existing os such windows xp. Connect client computer and fwa6504 with null modem cable. Follow the steps below to configure the windo...

  • Page 12

    Fwa6504 user’s manual 11 4. Please make the port settings to baud rate 115200, parity none, data bits 8, stop bits 1 5. Power up fwa6504 and the screen will display the bios information. 6. Press tab > key to enter bios setup screen in console mode . Press del > key to enter bios setup screen in vga...

  • Page 13: Chapter 5

    Fwa6504 user’s manual 12 chapter 5 opening the chassis fig. 5-1 loosen6 screws on back, left and right sides fig. 5-2 the system chapter 6 installing compactflash card fig. 6-1 insert compact flash card fig. 6-2 push compact flash card into the cf interface chapter 7 installing memory module fig. 7-...

  • Page 14: Chapter 8

    Fwa6504 user’s manual 13 chapter 8 installing 2.5” ssd fig. 8-1 loosen two screws to remove left & right side brackets fig. 8-2 fasten brackets on ssd with four screws fig. 8-3 fasten both brackets on ssd with four screws fig. 8-4 fix ssd & brackets with two screws sata connector.

  • Page 15: Chapter 9

    Fwa6504 user’s manual 14 chapter 9 installing mini pci-e module fig. 9-1 insert mini pci-e module (supports usb signal only) fig. 9-3 release two clips to remove module fig. 9-2 push down the module into socket.