IBASE Technology IB530 Series User Manual - Introduction

Manual is about: AMD Geode LX 3.5-inch Disk Size SBC

Summary of IB530 Series

  • Page 1

    Ib530f/ib530 series amd geode lx 3.5-inch disk size sbc user’s manual version 1.0a.

  • Page 2: Acknowledgments

    Ii ib530f user’s manual acknowledgments award is a registered trademark of award software international, inc. Ps/2 is a trademark of international business machines corporation. Amd, amd geode, and combinations thereof, are trademarks of advanced micro devices, inc. Microsoft windows is a registered...

  • Page 3: Introduction

    Ib530f user’s manual iii table of contents introduction ....................................................... 1 product description ............................................................. 1 checklist .............................................................................. 2 specificati...

  • Page 4

    Iv ib530f user’s manual this page is intentionally left blank..

  • Page 5: Introduction

    Introduction ib530f user’s manual 1 introduction product description the ib530f 3.5-inch disk size sbc incorporates the amd geode lx processor with speeds of 433mhz (lx700), 500mhz (lx800) or 600mhz (lx900). It comes with one ddr so-dimm socket that has a capacity of 1gb system memory. The board sup...

  • Page 6: Checklist

    Introduction 2 ib530f user’s manual checklist your ib530f package should include the items listed below. •the ib530f amd geode lx 3.5-inch disk size sbc •this user’s manual •1 cd containing chipset drivers and flash memory utility •heatsink for amd geode lx processor •options: •cable kit (ide, com, ...

  • Page 7: Specifications

    Introduction ib530f user’s manual 3 specifications [ cpu amd geode lx cpu, 481-ball bga cpu internal speed lx800 @500mhz lx700 @433mhz lx900@600mhz power management apm bios award bios chipset amd cs5536 i/o companion multi-function south bridge memory one ddr so-dimm socket, max. Up to 1gb graphic ...

  • Page 8: Board Dimensions

    Introduction board dimensions 4 ib530f user’s manual.

  • Page 9: Installations

    Installations ib530f user’s manual 5 installations this section provides information on how to use the jumpers and connectors on the ib530f in order to set up a workable system. The topics covered are: installing the memory .................................................................. 6 setting...

  • Page 10: Installing The Memory

    Installations installing the memory the ib530f board supports one sodimm ddr memory socket for a maximum total memory. The memory module capacities supported are 128mb, 256mb, 512mb and 1gb. Installing and removing memory modules to install the ddr modules, locate the memory slot on the board and pe...

  • Page 11: Setting The Jumpers

    Installations ib530f user’s manual 7 setting the jumpers jumpers are used on ib530f to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on ib530f and...

  • Page 12

    Installations jumper locations on ib530f jumpers on ib530f ............................................................................... Page jumper locations on ib530f ...................................................................... 8 jp1: clear cmos setting ...................................

  • Page 13

    Installations jp1: clear cmos setting use jp1 to clear the cmos contents. Note that the power connector should be disconnected from the board before clearing cmos. Jp1 function normal (default) clear cmos jp2: lvds vdd select (5v / 3.3v) jp2 vdd setting 3.3v 5v jp3: hdd led pin header pin # signal n...

  • Page 14: Connectors On Ib530F

    Installations 10 ib530f user’s manual connectors on ib530f the connectors on ib530f allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on ib530f and their respective functions. Connector locations on ...

  • Page 15

    Installations connector locations on ib530f connectors on ib530f............................................................... Page cn1, cn2: rj45 connector ...................................................................................... 12 cn3: vga crt connector ................................

  • Page 16

    Installations cn1, cn2: rj45 connector pin # signal name 1 td+ 2 td- 3 rd+ 4 rj45-4a 5 rj45-5a 6 rd- 7 rj45-7a 8 rj45-8a cn3: vga crt connector [ signal name pin pin signal name red 1 2 green blue 3 4 nc gnd 5 6 gnd gnd 7 8 gnd vcc 9 10 gnd n.C. 11 12 ddcda hsync 13 14 vsync ddcclk 15 cn4: compact f...

  • Page 17

    Installations cn6, j13: serial port cn6 is the d-sub type com1 serial port connector pin # signal name (rs-232) 1 dcd, data carrier detect 2 rxd, receive data 3 txd, transmit data 4 dtr, data terminal ready 5 ground 6 dsr, data set ready 7 rts, request to send 8 cts, clear to send 9 ri, ring indicat...

  • Page 18

    Installations cn7: pc-104 connector the pc-104 connector* is a dual-in-line pin headers that support pc-104 isa modules, with 64 pins and 40 pins in each line. The following table shows the their pin assignments. *(non-dma isa only) con1 con2 pin signal name pin signal name pin signal name pin signa...

  • Page 19

    Installations j2: reset switch pin # signal name 1 reset 2 ground j4: external audio connector j4 is a 12-pin header that is used to connect to the optional audio cable card that integrates jacks for line in, line out and mic. Signal name pin # pin # signal name lineout r 1 2 lineout l ground 3 4 gr...

  • Page 20

    Installations j5: tft panel connector (when board supports 18-bit) here is the pin definition of j5 when it supports for 18-bit tft flat panel lcd displays. Signal name pin # pin # signal name +12v 1 2 +12v ground 3 4 ground 5v/3.3v 5 6 5v/3.3v n.C. 7 8 ground n.C. 9 10 n.C. R0 11 12 r1 r2 13 14 r3 ...

  • Page 21

    Installations j 7: irda connector pin # signal name 1 +5v 2 ir rx 3 ground 4 ir tx j9, j15: usb connectors the j9, j15 usb pin header connectors support four usb 2.0 ports. Signal name pin pin signal name +5v 1 5 ground usb0- 2 6 usb1+ usb0+ 3 7 usb1- ground 4 8 +5v j10: ps/2 keyboard and mouse conn...

  • Page 22

    Installations j14: power dc-in pin # signal name 1 dc in (12v only) 2 ground j16: digital 4-in 4-out connector signal name pin pin signal name ground 1 2 vcc out3 3 4 out1 out2 5 6 out0 in3 7 8 in1 in2 9 10 in0 ide1: ide connector signal name pin # pin # signal name reset ide 1 2 ground host data 7 ...

  • Page 23: Bios Setup

    Bios setup ib530f user’s manual 19 bios setup this chapter describes the different settings available in the award bios that comes with the board. The topics covered in this chapter are as follows: bios introduction ........................................................................ 20 bios set...

  • Page 24

    Bios setup 20 ib530f user’s manual bios introduction the award bios (basic input/output system) installed in your computer system’s rom supports various processors. The bios provides critical low-level support for a standard device such as disk drives, serial ports and parallel ports. It also adds v...

  • Page 25

    Bios setup ib530f user’s manual 21 phoenix - awardbios cmos setup utility standard cmos features load fail-safe defaults advanced bios features load optimized defaults advanced chipset features set supervisor integrated peripherals set user password power management setup save & exit setup pnp/pci c...

  • Page 26

    Bios setup 22 ib530f user’s manual standard cmos setup “standard cmos setup” choice allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the motherboard is already installed in a working system, you will not need to select th...

  • Page 27

    Bios setup ib530f user’s manual 23 time the time format is: hour : 00 to 23 minute : 00 to 59 second : 00 to 59 to set the time, highlight the “time” field and use the / or +/- keys to set the current time. Ide primary hdds / ide secondary hdds the onboard pci ide connectors provide primary and seco...

  • Page 28

    Bios setup 24 ib530f user’s manual video this field selects the type of video display card installed in your system. You can choose the following video display cards: ega/vga for ega, vga, sega, svga or pga monitor adapters. (default) cga 40 power up in 40 column mode. Cga 80 power up in 80 column m...

  • Page 29

    Bios setup ib530f user’s manual 25 advanced bios features this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Phoenix - awardbios cmos setup utility advanced bios features virus warning disabled item help cpu intern...

  • Page 30

    Bios setup 26 ib530f user’s manual swap floppy drive this item allows you to determine whether or not to enable swap floppy drive. When enabled, the bios swaps floppy drive assignments so that drive a becomes drive b, and drive b becomes drive a. By default, this field is set to disabled. Boot up fl...

  • Page 31

    Bios setup ib530f user’s manual 27 os select for dram > 64mb this option allows the system to access greater than 64mb of dram memory when used with os/2 that depends on certain bios calls to access memory. The default setting is non-os/2. Small logo (epa) show the epa logo appears at the right side...

  • Page 32

    Bios setup 28 ib530f user’s manual advanced chipset features this setup menu controls the configuration of the chipset. Phoenix - awardbios cmos setup utility advanced chipset features cpu frequency auto item help memory frequency auto menu level > cas latency auto video memory size 8m output displa...

  • Page 33

    Bios setup ib530f user’s manual 29 integrated peripherals this section sets configurations for your hard disk and other integrated peripherals. The first screen shows three main items for user to select. Once an item selected, a submenu appears. Details follow. Phoenix - awardbios cmos setup utility...

  • Page 34

    Bios setup 30 ib530f user’s manual onboard lan boot rom this feature allows users to enable or disable the onboard lan boot rom. The default setting is disabled onboard fdc controller select enabled if your system has a floppy disk controller (fdc) installed on the motherboard and you wish to use it...

  • Page 35

    Bios setup ib530f user’s manual 31 power management setup the power management setup allows you to save energy of your system effectively. Phoenix - awardbios cmos setup utility power management setup acpi function disabled item help power management apm ** pm timers ** menu level > standby mode dis...

  • Page 36

    Bios setup 32 ib530f user’s manual pnp/pci configurations this option configures the pci bus system. All pci bus systems on the system use int#, thus all installed pci cards must be set to this value. Phoenix - awardbios cmos setup utility pnp/pci configurations pnp os installed no item help init di...

  • Page 37

    Bios setup ib530f user’s manual 33 pc health status this section shows the parameters in determining the pc health status. These parameters include temperatures, fan speeds and voltages. Phoenix - awardbios cmos setup utility pc health status item help current system temp. 45°c/113°f menu level > cu...

  • Page 38

    Bios setup 34 ib530f user’s manual load fail-safe defaults this option allows you to load the troubleshooting default values permanently stored in the bios rom. These default settings are non-optimal and disable all high-performance features. Load optimized defaults this option allows you to load th...

  • Page 39: Drivers Installation

    Drivers installation ib530f user’s manual 35 drivers installation this section describes the installation procedures for software and drivers under the windows 2000 and windows xp. The software and drivers are included with the motherboard. If you find the items missing, please contact the vendor wh...

  • Page 40: Controller Driver

    Drivers installation entertainment encryption/decryption controller driver 1. In the windows operating system, go to the device manager. 2. As shown below, click the entertainment encryption/decryption controller under other devices. 3. In the following window, click the driver tab and click ok to c...

  • Page 41

    Drivers installation 4. In the hardware update wizard, select no, not this time and click next to continue. Then select install from a list of specific location (advanced). Click browse to find the driver’s path in the cd provided - \amd\aes. Then, click next to start the drivers installtion. Then c...

  • Page 42: Vga Drivers Installation

    Drivers installation vga drivers installation 1. In the windows operating system, go to the device manager. 2. As shown below, click the video controller (vga compatible under other devices. 3. In the following window, click the driver tab and click ok to continue. 38 ib530f user’s manual.

  • Page 43

    Drivers installation 4. In the hardware update wizard, select no, not this time and click next to continue. Then select install from a list of specific location (advanced). Ib530f user’s manual 39.

  • Page 44

    Drivers installation 5. In the next screen, click search for the best driver in these locations. Check include this location in the search. Click browse to find the driver’s path in the cd provided or enter the path directly - \amd\vga\. Then, click next to start the drivers installtion. Then click ...

  • Page 45: Audio Driver Installation

    Drivers installation audio driver installation 1. In the windows operating system, go to the device manager. 2. As shown below, click the multimedia audio controller under other devices. 3. In the following window, click the driver tab and click ok to continue. Ib530f user’s manual 41.

  • Page 46

    Drivers installation 4. In the hardware update wizard, select no, not this time and click next to continue. Then select install from a list of specific location (advanced). 42 ib530f user’s manual.

  • Page 47

    Drivers installation 5. In the next screen, click search for the best driver in these locations. Check include this location in the search. Click browse to find the driver’s path in the cd provided or enter the path directly - \amd\audio\xpe. Then, click next to start the drivers installtion. Then c...

  • Page 48

    Drivers installation pci bridge driver installation 1. In the windows operating system, go to the device manager. 2. As shown below, click other devices, then other pci bridge device. 44 ib530f user’s manual.

  • Page 49

    Drivers installation 3. In the following window, click the driver tab and click update driver to continue. Ib530f user’s manual 45.

  • Page 50

    Drivers installation 4. In the hardware update wizard, select no, not this time and click next to continue. Then select install from a list of specific location (advanced). 5. In the next screen, check include this location in the search. Click browse to find the driver’s path in the cd provided or ...

  • Page 51: Appendix

    Appendix ib530f user’s manual 47 appendix a. I/o port address map each peripheral device in the system is assigned a set of i/o port addresses which also becomes the identity of the device. The following table lists the i/o port addresses used. Address device description 000h - 01fh dma controller #...

  • Page 52

    Appendix 48 ib530f user’s manual b. Interrupt request lines (irq) peripheral devices use interrupt request lines to notify cpu for the service required. The following table shows the irq used by the devices on board. Level function irq0 system timer output irq1 keyboard irq2 pic2 (irq8-15) irq3 seri...

  • Page 53

    Appendix ib530f user’s manual 49 c. Watchdog timer configuration the wdt is used to generate a variety of output signals after a user programmable count. The wdt is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock. Under these sort of circumst...

  • Page 54

    Appendix 50 ib530f user’s manual call lock_chip ret enable_and_set_watchdog endp ;[]=============================================== ; name : disable_watchdog ; in : none ; out : none ;[]=============================================== disable_watchdog proc near call unlock_chip mov cl, 07h mov al, 08...

  • Page 55

    Appendix ib530f user’s manual 51 ;[]================================================ unlock_chip proc near mov dx, 4eh mov al, 0aah out dx, al ret unlock_chip endp ;[]================================================ ; name : write_reg ; in : cl - register index ; al - value to write ; out : none ;[]...

  • Page 56

    Appendix 52 ib530f user’s manual this page is intentionally left blank..