1. DL manuals
  2. IBASE Technology
  3. Computer Hardware
  4. IB835F
  5. User Manual

IBASE Technology IB835F User Manual

Summary of IB835F

  • Page 1

    Ib835f intel ® cedar trail + nm10 picmg1.0 full size cpu card user’s manual version 1.0

  • Page 2: Acknowledgments

    Ii ib835f user’s manual acknowledgments ami bios is a trademark of american megatrends inc. Ps/2 is a trademark of international business machines corporation. Intel and cedarview are registered trademarks of intel corporation. Microsoft windows is a registered trademark of microsoft corporation. Wi...

  • Page 3: Introduction

    Ib835f user’s manual iii table of contents introduction ...................................................... 1 checklist ............................................................................. 2 ib835f specifications ........................................................ 3 board dimensions...

  • Page 4

    Iv ib835f user’s manual this page is intentionally left blank..

  • Page 5: Introduction

    Introduction ib835f user’s manual 1 introduction ib835f is a picmg1.0 full size cpu card that comes with the intel atom d2550 processor running 1.86ghz and with a 1mb l2 cache. The board is based on the intel ® cg82nm10 pch chipset and supports two sodimm with a maximum memory capacity of 4gb. Ib835...

  • Page 6: Checklist

    Introduction 2 ib835f user’s manual checklist your ib835f package should include the items listed below. •the ib835f picmg1.0 full size cpu card •this user’s manual • i/o bracket •1 dvd containing chipset drivers and flash memory utility.

  • Page 7: Ib835F Specifications

    Introduction ib835f user’s manual 3 ib835f specifications form factor full size cpu card (picmg 1.0) cpu type intel® atom tm dc d2550 /1mb cache /1.86 ghz [tdp=10w] package = fcbga559 type[ 22 mm x 22 mm] ; cores / threads = 2 / 4 bios ami bios, support acpi function chipset intel® cg82nm10 pch [tdp...

  • Page 8: Board Dimensions

    Introduction 4 ib835f user’s manual board dimensions.

  • Page 9: Installations

    Installations ib835f user’s manual 5 installations this section provides information on how to use the jumpers and connectors on the ib835f in order to set up a workable system. The topics covered are: installing the memory .......................................................................... 6...

  • Page 10: Installing The Memory

    Installations 6 ib835f user’s manual installing the memory the ib835f board supports two ddr3-1066 memory modules. Installing and removing memory modules to install the ddr3 modules, locate the memory slot on the board and perform the following steps: 1. Hold the ddr3 module so that the key of the d...

  • Page 11: Setting The Jumpers

    Installations ib835f user’s manual 7 setting the jumpers jumpers are used on ib835f to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on ib835f and...

  • Page 12

    Installations 8 ib835f user’s manual jumper locations on ib835f jumper locations on ib835f .......................................................... Page jp1: com1 rs232 ri/+5v/+12v power setting ............................... 10 jp2: com2 rs232 ri/+5v/+12v power setting .............................

  • Page 13

    Installations ib835f user’s manual 9 jp1: com1 rs232 ri/+5v/+12v power setting jp1 setting function pin 1-2 short/closed +12v pin 3-4 short/closed ri* pin 5-6 short/closed +5v *com1: j5 jp2: com2 rs232 ri/+5v/+12v power setting jp2 setting function pin 1-2 short/closed +12v pin 3-4 short/closed ri* ...

  • Page 14

    Installations 10 ib835f user’s manual jp3: clear cmos setting jp3 setting normal* clear cmos jp4: lcd panel power selection jp4 lcd panel power +3.3v* +5v jp6: lcd backlight control output level jp6 setting 2 1 +3.3v* 2 1 +5v 1 3 1 3 2 1.

  • Page 15

    Installations ib835f user’s manual 11 jp7: lvds function mode setting jp7 setting on* off *default 1 3.

  • Page 16: Connectors On Ib835F

    Installations 12 ib835f user’s manual connectors on ib835f the connectors on ib835f allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on ib835f and their respective functions. Connector locations on ...

  • Page 17

    Installations ib835f user’s manual 13 connector locations on ib835f.

  • Page 18

    Installations 14 ib835f user’s manual cn1, cn5: sata 2.0 connectors cn2, cn3, cn4: usb 2.0 connectors signal name pin # pin # signal name vcc 1 2 vcc d- 3 4 d- d+ 5 6 d+ ground 7 8 ground key 9 10 nc cn6: mini pcie connector 2 1 10 9.

  • Page 19

    Installations ib835f user’s manual 15 cn7: db-15 vga connector signal name pin # pin # signal name red 1 2 green blue 3 4 n.C. Gnd 5 6 gnd gnd 7 8 gnd vcc 9 10 gnd n.C. 11 12 ddcdata hsync 13 14 vsync ddcclk 15 cn8: usb2.0 connector cn9, cn10: gigabit lan (intel i211at) cn11: ps/2 keyboard & mouse s...

  • Page 20

    Installations 16 ib835f user’s manual j1: external audio connector signal name pin # pin # signal name line out_l 1 2 line out_r jd_front 3 4 ground line in_l 5 6 line in r jd line in 7 8 ground mic-l 9 10 mic-r jd mic1 11 12 ground j2: front panel function connector signal name pin # pin # signal n...

  • Page 21

    Installations ib835f user’s manual 17 j3: spi flash connector (factory use only) j5, j4, j7: com 1/3/4 rs232 serial port signal name pin # pin # signal name dcd, data carrier detect 1 2 rxd, receive data txd, transmit data 3 4 dtr, data terminal ready gnd, ground 5 6 dsr, data set ready rts, request...

  • Page 22

    Installations 18 ib835f user’s manual j8: com2 rs232/422/485 [ pin # signal name rs-232 r2-422 rs-485 1 dcd tx- data- 2 rx tx+ data+ 3 tx rx+ nc 4 dtr rx- nc 5 ground ground ground 6 dsr nc nc 7 rts nc nc 8 cts nc nc 9* ri nc nc * pin 9 supports ri/+5v/+12v function. 6 1 10 5.

  • Page 23

    Installations ib835f user’s manual 19 j6: parallel port signal name pin # pin # signal name line printer strobe 1 14 autofeed pd0, parallel data 0 2 15 error pd1, parallel data 1 3 16 initialize pd2, parallel data 2 4 17 select pd3, parallel data 3 5 18 ground pd4, parallel data 4 6 19 ground pd5, p...

  • Page 24

    Installations 20 ib835f user’s manual j11: digital i/o signal name pin # pin # signal name gnd 1 2 +5v out3 3 4 out1 out2 5 6 out0 in3 7 8 in1 in2 9 10 in0 j12, j14: ch1, ch2: lvds connectors signal name pin # pin # signal name ld0+ 1 2 ld0- gnd 3 4 gnd ld1+ 5 6 ld1- gnd 7 8 gnd ld2+ 9 10 ld2- gnd 1...

  • Page 25

    Installations ib835f user’s manual 21 j15: external atx power connector pin # signal name 1 ground 2 ps-on (soft on/off) 3 5vsb (standby +5v) j16: lcd backlight connector pin # signal name 1 +12v 2 backlight enable 3 brightness control 4 ground cpu_fan1: cpu fan power connector pin # signal name 1 g...

  • Page 26

    Installations 22 ib835f user’s manual sys_fan1: system fan power connector pin # signal name 1 ground 2 +12v 3 nc 1 3.

  • Page 27: Bios Setup

    Bios setup ib835f user’s manual 23 bios setup this chapter describes the different settings available in the ami bios that comes with the board. The topics covered in this chapter are as follows: bios introduction ............................................................................. 24 bios ...

  • Page 28: Bios Introduction

    Bios setup 24 ib835f user’s manual bios introduction the bios (basic input/output system) installed in your computer system’s rom supports intel processors. The bios provides critical low-level support for a standard device such as disk drives, serial ports and parallel ports. It also password prote...

  • Page 29: Advanced Settings

    Bios setup ib835f user’s manual 25 advanced settings this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio setup utility main advanced chipset boot security save & exit legacy oprom support → ← select screen ↑↓ ...

  • Page 30

    Bios setup 26 ib835f user’s manual pci subsystem settings aptio setup utility main advanced chipset boot security save & exit pci bus driver version v 2.05.01 → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit ...

  • Page 31

    Bios setup ib835f user’s manual 27 acpi settings aptio setup utility main advanced chipset boot security save & exit enable acpi auto configuration disabled → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit en...

  • Page 32

    Bios setup 28 ib835f user’s manual wake up event settings aptio setup utility main advanced chipset boot security save & exit → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit wake on ring disabled wake on pci...

  • Page 33

    Bios setup ib835f user’s manual 29 cpu configuration this section shows the cpu configuration parameters. Aptio setup utility main advanced chipset boot security save & exit cpu configuration → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: opti...

  • Page 34

    Bios setup 30 ib835f user’s manual lvds (edp/dp) configuration aptio setup utility main advanced chipset boot security save & exit lvds (edp/dp) configuration → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit ...

  • Page 35

    Bios setup ib835f user’s manual 31 usb configuration aptio setup utility main advanced chipset boot security save & exit usb configuration → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit usb devices: none le...

  • Page 36

    Bios setup 32 ib835f user’s manual f81846 super io configuration aptio setup utility main advanced chipset boot security save & exit f81846 super io configuration → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: e...

  • Page 37

    Bios setup ib835f user’s manual 33 f81846 h/w monitor aptio setup utility main advanced chipset boot security save & exit pc health status → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit cpu temperature +39 ...

  • Page 38: Chipset Settings

    Bios setup 34 ib835f user’s manual chipset settings this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio setup utility main advanced chipset boot security save & exit → ← select screen ↑↓ select item enter: sel...

  • Page 39

    Bios setup ib835f user’s manual 35 host bridge this section allows you to configure the host bridge chipset. Aptio setup utility main advanced chipset boot security save & exit → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f...

  • Page 40

    Bios setup 36 ib835f user’s manual tpt device aptio setup utility main advanced chipset boot security save & exit → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit azalia controller hd audio select usb mode by...

  • Page 41

    Bios setup ib835f user’s manual 37 pci express root port2 aptio setup utility main advanced chipset boot security save & exit → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit pci express port 2 auto port 0 io...

  • Page 42: Boot Settings

    Bios setup 38 ib835f user’s manual boot settings aptio setup utility main advanced chipset boot security save & exit boot configuration → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit setup prompt timeout 1 ...

  • Page 43: Security Settings

    Bios setup ib835f user’s manual 39 option rom messages set display mode for option rom. Options: force bios and keep current. Interrupt 19 capture enable: allows option roms to trap int 19. Boot option priorities sets the system boot order. Security settings this section allows you to configure and ...

  • Page 44: Save & Exit Settings

    Bios setup 40 ib835f user’s manual save & exit settings aptio setup utility main advanced chipset boot security save & exit save changes and exit → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit discard chang...

  • Page 45

    Bios setup ib835f user’s manual 41 save as user defaults save the changes done so far as user defaults. Restore user defaults restore the user defaults to all the setup options. Boot override pressing enter causes the system to enter the os. Launch efi shell from filesystem device attempts to launch...

  • Page 46: Drivers Installation

    Drivers installation 42 ib835f user’s manual drivers installation this section describes the installation procedures for software and drivers. The software and drivers are included with the motherboard. If you find the items missing, please contact the vendor where you made the purchase. The content...

  • Page 47

    Drivers installation ib835f user’s manual 43 intel chipset software installation utility the intel chipset drivers should be installed first before the software drivers to enable plug & play inf support for intel chipset components. Follow the instructions below to complete the installation. 1. Inse...

  • Page 48

    Drivers installation 44 ib835f user’s manual 3. When the welcome screen to the intel® chipset device software appears, click next to continue. 4. Click yes to accept the software license agreement and proceed with the installation process. 5. On the readme file information screen, click next to cont...

  • Page 49: Vga Drivers Installation

    Drivers installation ib835f user’s manual 45 vga drivers installation 1. Insert the disc that comes with the board. Click intel and then intel(r) cedar trail chipset drivers. 2. Click intel(r) cedar trail graphics driver..

  • Page 50

    Drivers installation 46 ib835f user’s manual 3. When the welcome screen appears, click next to continue. 4. Click yes to to agree with the license agreement and continue the installation. 5. On the readme file information screen, click next to continue the installation of the intel® graphics media a...

  • Page 51

    Drivers installation ib835f user’s manual 47 realtek hd audio driver installation follow the steps below to install the realtek hd audio drivers. 1. Insert the disc that comes with the board. Click intel and then intel(r) cedar trail chipset drivers. 2. Click realtek high definition audio driver..

  • Page 52

    Drivers installation 48 ib835f user’s manual 3. On the welcome to the installshield wizard screen, click next to proceed with and complete the installation process. 4. Restart the computer when prompted..

  • Page 53

    Drivers installation ib835f user’s manual 49 intel lan controller drivers installation follow the steps below to install the realtek lan drivers. 1. Insert the cd that comes with the board. Click lan card, and then intel lan controller drivers. 2. Click intel® i21x gigabit network drivers..

  • Page 54

    Drivers installation 50 ib835f user’s manual 3.When the welcome screen to installshield wizard appears, click next to start the installation 4.When the installshieldwizard has finished installing the intel lan drivers, click finish..

  • Page 55

    Drivers installation ib835f user’s manual 51 this page is intentionally left blank..

  • Page 56: Appendix

    Appendix 52 ib835f user’s manual appendix a. I/o port address map each peripheral device in the system is assigned a set of i/o port addresses which also becomes the identity of the device. The following table lists the i/o port addresses used. Address device description 0000-001f direct memory acce...

  • Page 57

    Appendix ib835f user’s manual 53 address device description 00c0-00df direct memory access controller 00f0-00f0 numeric data processor 02e8-02ef serial port #4(com4) 02f8-02ff serial port #2(com2) 03b0-03bb intel graphics graphics media accelerator 3600 series 03c0-03df intel graphics graphics media...

  • Page 58

    Appendix 54 ib835f user’s manual b. Interrupt request lines (irq) peripheral devices use interrupt request lines to notify cpu for the service required. The following table shows the irq used by the devices on board. Level function irq 0 system timer output irq 1 standard ps/2 keyboard irq 3 serial ...

  • Page 59

    Appendix ib835f user’s manual 55 c. Watchdog timer configuration the wdt is used to generate a variety of output signals after a user programmable count. The wdt is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock. Under these sorts of circums...

  • Page 60

    Appendix 56 ib835f user’s manual } //--------------------------------------------------------------------------- void enablewdt(int interval) { unsigned char bbuf; bbuf = get_f81866_reg(0x2b); bbuf &= (~0x20); set_f81866_reg(0x2b, bbuf); //enable wdto set_f81866_ld(0x07); //switch to logic device 7 ...

  • Page 61

    Appendix ib835f user’s manual 57 //--------------------------------------------------------------------------- // // this code and information is provided "as is" without warranty of any // kind, either expressed or implied, including but not limited to the // implied warranties of merchantability a...

  • Page 62

    Appendix 58 ib835f user’s manual unsigned char get_f81866_reg(unsigned char reg) { unsigned char result; unlock_f81866(); outportb(f81866_index_port, reg); result = inportb(f81866_data_port); lock_f81866(); return result; } //--------------------------------------------------------------------------...