- DL manuals
- IBASE Technology
- Motherboard
- IB895
- User manual
IBASE Technology IB895 User manual
Summary of IB895
Page 1
Ib895 intel ® cedarview-d or cedarview-m / nm10 3.5” disk size sbc user’s manual version 1.1a.
Page 2
Ii ib895 user’s manual acknowledgments ami is a registered trademark of american megatrends inc. Ps/2 is a trademark of international business machines corporation. Intel and intel® sandy bridge dc/qc processor are registered trademarks of intel corporation. Microsoft windows is a registered tradema...
Page 3: Introduction
Ib895 user’s manual iii table of contents introduction .......................................................1 product description............................................................. 1 checklist.............................................................................. 2 ib895 specifica...
Page 4
Iv ib895 user’s manual this page is intentionally left blank..
Page 5: Introduction
Introduction ib895 user’s manual 1 introduction product description the ib895 is a 3.5-inch single board computer based on the intel ® atom cedarview chipset. The cedar trail is a platform that uses the intel cedarview-d or cedarview -m processor and intel nm10 express chipset family in the desktop ...
Page 6
Introduction 2 ib895 user’s manual checklist your ib895 package should include the items listed below. the ib895 embedded flex motherboard this user’s manual 1 cd containing chipset drivers and flash memory utility.
Page 7
Introduction ib895 user’s manual 3 ib895 specifications product name ib895 [default silk screen model # on pcb] ib895n(n2600 onboard) form factor 3.5” cpu type/speed intel® atom tm dc d2550 / 1mb cache / 1.86 ghz [tdp=10w] (ib895) intel® atom tm dc n2600 / 1mb cache / 1.60 ghz [tdp=3.5w] (ib895n) pa...
Page 8
Introduction 4 ib895 user’s manual [ watchdog timer yes (256 segments, 0, 1, 2…255 sec/min) power connector +12v ~ +24v dc-in others - i-smart function (ti msp430g2433 mcu) - at24c02c eeprom [so8 type] via smbus (optional) os support - windows 7 (32-bit only) - linux rohs yes board size 102mm x 147m...
Page 9: Installations
Installations ib895 user’s manual 5 installations this section provides information on how to use the jumpers and connectors on the ib895 in order to set up a workable system. The topics covered are: installing the memory ........................................................................... 6 ...
Page 10
Installations 6 ib895 user’s manual installing the memory the ib895 board supports one ddr3 memory socket for a maximum total memory of 2gb or 4gb ddr3 memory type. Note: ib895 with intel atom dc d2550 supports up to 4gb and ib895n with intel atom dc n2600 supports up to 2gb. Installing and removing...
Page 11
Installations ib895 user’s manual 7 setting the jumpers jumpers are used on ib895 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on ib895 and th...
Page 12
Installations 8 ib895 user’s manual jumper locations on ib895 jumpers on ib895 ............................................................................ Page jp2: clear cmos contents ................................................................... 9 jp3: bl voltage setting .......................
Page 13
Installations ib895 user’s manual 9 jp2: clear cmos contents jp2 setting function pin 1-2 short/closed normal pin 2-3 short/closed clear cmos jp3: bl voltage setting jp3 setting function pin 1-2 short/closed +3.3v pin 3-4 short/closed +5v pin 5-6 short/closed +12v(default) jp5: com1 rs232 ri/+5v/+12...
Page 14
Installations 10 ib895 user’s manual jp7: bl_adj_level setting jp7 setting voltage open 3.3v close 5v(default) jp8: factory use only sw1: lvds panel type setting sw1-4 sw1-3 sw1-2 sw1-1 panel type on on on on 800*600 18bit 1ch on on on off 1024*768 18bit 1ch on on off on 1024*768 24bit 1ch on on off...
Page 15
Installations ib895 user’s manual 11 connectors on ib895 connector locations on ib895............................................................ 12 cn4, cn5: gigabit lan (intel 82583v)............................................ 13 cn6: usb 1/2 connector ...............................................
Page 16
Installations 12 ib895 user’s manual connector locations on ib895.
Page 17
Installations ib895 user’s manual 13 cn4, cn5: gigabit lan (intel 82583v) this rj45 lan connector (cn4 only) features for eup lan wakeup. Cn6: usb 1/2 connector cn7: vga dvi-i connector cn8: db9 connector (com1) is a db-9 connector. Signal name pin # pin # signal name dcd, data carrier detect 1 6 ds...
Page 18
Installations 14 ib895 user’s manual cn1, cn3: sata connectors cn2: lcd backlight connector pin # signal name 1 backlight power 2 backlight enable 3 brightness control 4 ground j1: board input power connector pin # signal name 1 +12v to +24v 1 2 gnd j2, j3: sata hdd power connector pin # signal name...
Page 19
Installations ib895 user’s manual 15 j7: keyboard & mouse connector (df11 connector) signal name pin # pin # signal name vcc 2 1 vcc kbda 4 3 mda kbcl 6 5 mcl ground 8 7 ground j8: ddr3 so-dimm socket j9: mini pcie connector(support msata) j9 also supports msata. However, when j9 is used for msata, ...
Page 20
Installations 16 ib895 user’s manual j15: com3, com4 serial port (df11 connector) signal name pin # pin # signal name dsr3 2 1 dcd3 rts3 4 3 rxd3 cts3 6 5 txd3 ri3 8 7 dtr3 nc 10 9 ground dsr4 12 11 dcd4 rts4 14 13 rxd4 cts4 16 15 txd4 ri4 18 17 dtr4 nc 20 19 ground j16: com2/rs232 serial port signa...
Page 21
Installations ib895 user’s manual 17 j22: amplify connector pin # signal name 1 outl+ 2 outl- 3 outr- 4 outr+ j23: lvds eeprom flash connector (factory use only) ch1, ch2: lvds connectors signal name pin # pin # signal name n.C 19 20 n.C enable 17 18 lcd_pwr clk+ 15 16 clk- gnd 13 14 gnd ld2+ 11 12 ...
Page 22
Installations 18 ib895 user’s manual jp1: front panel connector the following table shows the pin outs of the 2x4 pin header signal name pin # pin # signal name ground 1 2 pwr_sw pwr_led+ 3 4 pwr_led-(gnd ) hdd_led+ 5 6 hdd_led- ground 7 8 reset jp1 provides connectors for system indicators that pro...
Page 23: Bios Setup
Bios setup ib895 user’s manual 19 bios setup this chapter describes the different settings available in the ami bios that comes with the board. The topics covered in this chapter are as follows: bios introduction ..........................................................................................
Page 24
Bios setup 20 ib895 user’s manual bios introduction the bios (basic input/output system) installed in your computer system’s rom supports intel processors. The bios provides critical low-level support for a standard device such as disk drives, serial ports and parallel ports. It also password protec...
Page 25
Bios setup ib895 user’s manual 21 warning: it is strongly recommended that you avoid making any changes to the chipset defaults. These defaults have been carefully chosen by both ami and your system manufacturer to provide the absolute maximum performance and reliability. Changing the defaults could...
Page 26
Bios setup 22 ib895 user’s manual advanced settings this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio setup utility main advanced chipset boot security save & exit legacy oprom support launch pxe oprom disab...
Page 27
Bios setup ib895 user’s manual 23 pci subsystem settings aptio setup utility main advanced chipset boot security save & exit pci bus driver version v 2.05.01 pci rom priority legacy rom pci common settings pci latency timer 32 pci bus clocks vga palette snoop disabled perr# generation disabled serr#...
Page 28
Bios setup 24 ib895 user’s manual acpi settings aptio setup utility main advanced chipset boot security save & exit acpi settings enable acpi auto configuration disabled → ← select screen ↑↓ select item enter: select +- change opt f1: general help f2: previous values f3: optimized default f4: save &...
Page 29
Bios setup ib895 user’s manual 25 wake up event setting aptio setup utility main advanced chipset boot security save & exit wake on ring disabled wake on pcie pme disabled → ← select screen ↑↓ select item enter: select +- change opt f1: general help f2: previous values f3: optimized default f4: save...
Page 30
Bios setup 26 ib895 user’s manual cpu configuration this section shows the cpu configuration parameters. Aptio setup utility main advanced chipset boot security save & exit cpu configuration processor type intel(r) atom(tm) cpu emt64 not supported processor speed 1865 mhz system bus speed 533 mhz ra...
Page 31
Bios setup ib895 user’s manual 27 ismart controller aptio setup utility main advanced chipset boot security save & exit ismart controller eup/erp standby power control keep standby power power-on after power failure disable schedule slot 1 none schedule slot 2 none → ← select screen ↑↓ select item e...
Page 32
Bios setup 28 ib895 user’s manual usb configuration aptio setup utility main advanced chipset boot security save & exit usb configuration usb devices: none legacy usb support enabled ehci hand-off enabled usb hardware delays and time-outs: usb transfer time-out 20 sec device reset time-out 20 sec de...
Page 33
Bios setup ib895 user’s manual 29 super io configuration aptio setup utility main advanced chipset boot security save & exit w83627uhg super io configuration super io chip winbond w83627uhg ► w83627uhg serial port 0 configuration ► w83627uhg serial port 1 configuration ► w83627uhg serial port 2 conf...
Page 34
Bios setup 30 ib895 user’s manual cpu shutdown temperature the default setting is disabled. Smart fan control disabled (default) 60 ℃ 70 ℃ 80 ℃ 90 ℃ ppm configuration aptio setup utility main advanced chipset boot security save & exit ppm configuration eist enabled → ← select screen ↑↓ select item e...
Page 35
Bios setup ib895 user’s manual 31 chipset settings this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio setup utility main advanced chipset boot security save & exit ► host bridge ► south bridge → ← select scre...
Page 36
Bios setup 32 ib895 user’s manual memory frequency and timing aptio setup utility main advanced chipset boot security save & exit memory frequency and timing mrc fast boot enabled max tolud dynamic → ← select screen ↑↓ select item enter: select +- change opt f1: general help f2: previous values f3: ...
Page 37
Bios setup ib895 user’s manual 33 south bridge this section allows you to configure the south bridge chipset. Aptio setup utility main advanced chipset boot security save & exit ► tpt device ► pci express root port0 ► pci express root port1 ► pci express root port2 ► pci express root port3 dmi link ...
Page 38
Bios setup 34 ib895 user’s manual tpt device aptio setup utility main advanced chipset boot security save & exit azalia controller hd audio select usb mode by controllers uhci #1 (port 0 and 1) enabled uhci #2 (port 2 and 3) enabled uhci #3 (port 4 and 5) enabled uhci #4 (port 6 and 7) enabled usb 2...
Page 39
Bios setup ib895 user’s manual 35 pci express root port2 aptio setup utility main advanced chipset boot security save & exit pci express port 2 auto port 0 ioxapic disabled automatic aspm auto → ← select screen ↑↓ select item enter: select +- change opt f1: general help f2: previous values f3: optim...
Page 40
Bios setup 36 ib895 user’s manual boot settings aptio setup utility main advanced chipset boot security save & exit boot configuration setup prompt timeout 1 bootup numlock state on quiet boot disabled fast boot disabled csm16 module version 07.68 gatea20 active upon request option rom messages forc...
Page 41
Bios setup ib895 user’s manual 37 security settings this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio setup utility main advanced chipset boot security save & exit password description if only the administra...
Page 42
Bios setup 38 ib895 user’s manual save & exit settings aptio setup utility main advanced chipset boot security save & exit save changes and exit discard changes and exit save changes and reset discard changes and reset save options save changes discard changes restore defaults save as user defaults ...
Page 43: Drivers Installation
Driver installation ib895 user’s manual 39 drivers installation this section describes the installation procedures for software and drivers. The software and drivers are included with the motherboard. If you find the items missing, please contact the vendor where you made the purchase. The contents ...
Page 44
Driver installation 40 ib895 user’s manual intel chipset software installation utility the intel chipset drivers should be installed first before the software drivers to enable plug & play inf support for intel chipset components. Follow the instructions below to complete the installation. 1. Insert...
Page 45
Driver installation ib895 user’s manual 41 vga drivers installation important note: after installing the graphics driver, the default display is still lvds. Both vga/crt and dvi will only be extended displays. To switch to any of these displays, use the hot key: for vga – ctrl+alt+f1 for dvi – ctrl+...
Page 46
Driver installation 42 ib895 user’s manual realtek hd audio driver installation 1. Click realtek high definition audio driver. 2. On the welcome to the installshield wizard screen, click next to proceed with and complete the installation process. 3. Restart the computer when prompted..
Page 47
Driver installation ib895 user’s manual 43 lan drivers installation 1. Insert the cd that comes with the board. Click lan card and then intel(r) lan controller drivers. 2. Click intel(r) gigabit ethernet drivers. 3. In the welcome screen, click next. 4. In the license agreement screen, click i accep...
Page 48: Appendix
Appendix 44 ib895 user’s manual appendix a. I/o port address map each peripheral device in the system is assigned a set of i/o port addresses which also becomes the identity of the device. The following table lists the i/o port addresses used. Address device description 0000-001f direct memory acces...
Page 49
Appendix ib895 user’s manual 45 address device description 03b0-03bb intel(r) graphics media accelerator 3600 series 03c0-03df intel(r) graphics media accelerator 3600 series 03e8-03ef communications port (com3) 03f8-03ff communications port (com1) 04d0-04d1 programmable interrupt controller 0d00-ff...
Page 50
Appendix 46 ib895 user’s manual b. Interrupt request lines (irq) peripheral devices use interrupt request lines to notify cpu for the service required. The following table shows the irq used by the devices. Level function irq 0 system timer irq 1 standard ps/2 keyboard irq 3 communications port (com...
Page 51
Appendix ib895 user’s manual 47 c. Digital i/o sample code file of the w627uhg.H //--------------------------------------------------------------------------- // // this code and information is provided "as is" without warranty of any // kind, either expressed or implied, including but not limited t...
Page 52
Appendix 48 ib895 user’s manual file of the w627uhg.Cpp //--------------------------------------------------------------------------- // // this code and information is provided "as is" without warranty of any // kind, either expressed or implied, including but not limited to the // implied warranti...
Page 53
Appendix ib895 user’s manual 49 { unlock_w627uhg(); outportb(w627uhg_index_port, w627uhg_reg_ld); outportb(w627uhg_data_port, ld); lock_w627uhg(); } //--------------------------------------------------------------------------- void set_w627uhg_reg( unsigned char reg, unsigned char data) { unlock_w62...
Page 54
Appendix 50 ib895 user’s manual file of the main.Cpp //--------------------------------------------------------------------------- // // this code and information is provided "as is" without warranty of any // kind, either expressed or implied, including but not limited to the // implied warranties ...
Page 56
Appendix 52 ib895 user’s manual d. Watchdog timer configuration the wdt is used to generate a variety of output signals after a user programmable count. The wdt is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock. Under these sorts of circumst...
Page 57
Appendix ib895 user’s manual 53 init_finish: return (result); } //--------------------------------------------------------------------------- void unlock_w627uhg (void) { outportb(w627uhg_index_port, w627uhg_unlock); outportb(w627uhg_index_port, w627uhg_unlock); } //---------------------------------...
Page 58
Appendix 54 ib895 user’s manual file of the w627uhg.H //--------------------------------------------------------------------------- // // this code and information is provided "as is" without warranty of any // kind, either expressed or implied, including but not limited to the // implied warranties...
Page 59
Appendix ib895 user’s manual 55 file of the main.Cpp //--------------------------------------------------------------------------- // // this code and information is provided "as is" without warranty of any // kind, either expressed or implied, including but not limited to the // implied warranties ...
Page 60
Appendix 56 ib895 user’s manual { unsigned char bbuf; set_w627uhg_ld(0x08);.................................................................. //switch to logic device 8 set_w627uhg_reg(0x30, 0x01); ........................................................................ //enable timer bbuf = get_w62...