Summary of IP400
Page 1
Ip400 etx baseboard user’s manual version 1.0
Page 2
Ii ip400 user’s manual acknowledgments award is a registered trademark of award software international, inc. Ps/2 is a trademark of international business machines corporation. Intel and pentium m are registered trademarks of intel corporation. Microsoft windows is a registered trademark of microsof...
Page 3: Introduction
Ip400 user’s manual iii table of contents introduction .......................................................1 ip400 specifications............................................................ 1 board dimensions ............................................................... 2 installations ...........
Page 4
Iv ip400 user’s manual the ip400 baseboard.
Page 5: Introduction
Introduction ip400 user’s manual 1 introduction ip400 specifications [ product name ip400 (for com etx module) form factor flex atx for com etx cpu module battery lithium battery for real time clock audio derived from cometx module ac97 codec alc655 w/ 6 channels (line-out, line-in, mic.) + ns lm494...
Page 6
Introduction 2 ip400 user’s manual board dimensions.
Page 7: Installations
Installations ip400 user’s manual 3 installations this section provides information on how to use the jumpers and connectors on the ip400 in order to set up a workable system. The topics covered are: installing the cpu module.................................................. 4 setting the jumpers .....
Page 8
Installations 4 ip400 user’s manual installing the cpu module the ip400 board supports com express cpu module such as the et810. Below is a picture showing how the cpu module and the heatsink should be installed on the ip400 baseboard. There are five holes on the ip400 that can be used to screw the ...
Page 9
Installations ip400 user’s manual 5 setting the jumpers jumpers are used on ip400 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on ip400 and th...
Page 10
Installations 6 ip400 user’s manual jumper locations on ip400 jumpers on ip400 ............................................................................ Page jumper locations on ip400 ................................................................... 6 jp2, jp3, jp4: atx power on control ..........
Page 11
Installations ip400 user’s manual 7 jp2, jp3, jp4: atx power on control jp2, jp3 jp4 atx power on control with lpc i/o with com express’ southbridge jp5: compactflash slave/master selection jp5 cf setting master slave [ jp6: lcd panel power selection jp6 lcd panel power 3.3v 5v.
Page 12
Installations 8 ip400 user’s manual connectors on ip400 the connectors on ip400 allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on ip400 and their respective functions. Connector locations on ip400...
Page 13
Installations ip400 user’s manual 9 connector locations on ip400
Page 14
Installations 10 ip400 user’s manual cn2: ps/2 keyboard and ps/2 mouse connectors ps/2 mouse ps/2 keyboard signal name keyboard mouse signal name keyboard data 1 1 mouse data n.C. 2 2 n.C. Gnd 3 3 gnd 5v 4 4 5v keyboard clock 5 5 mouse clock n.C. 6 6 n.C. J8: s-video and rca connectors cn3: com1 and...
Page 15
Installations ip400 user’s manual 11 signal name pin # pin # signal name red 1 2 green blue 3 4 n.C. Gnd 5 6 gnd gnd 7 8 gnd n.C. 9 10 gnd n.C. 11 12 n.C. Hsync 13 14 vsync [[[[ vga nc 15 cn6: 10/100 rj-45 and usb1/2 ports j15: spdif out connector cn7: gigabit rj-45 and usb3/4 ports cn8: audio conne...
Page 16
Installations 12 ip400 user’s manual fdd1: floppy drive connector fdd1is a slim 26-pin connector and will support up to 2.88mb fdd. Signal name pin # pin # signal name vcc 1 2 index vcc 3 4 drv_sel vcc 5 6 dsk_ch nc 7 8 nc nc 9 10 motor dinst 11 12 dir nc 13 14 step gnd 15 16 wdata gnd 17 18 wgate g...
Page 17
Installations ip400 user’s manual 13 fan1: cpu fan power connector fan1 is a 3-pin header for the cpu fan. The fan must be a 12v fan. Pin # signal name 1 ground 2 +12v 3 rotation detection fan2: system fan power connector pin # signal name 1 ground 2 +12v 3 rotation detection j1: wake on lan connect...
Page 18
Installations 14 ip400 user’s manual j4: atx power supply connector signal name pin # pin # signal name 3.3v 13 1 3.3v -12v 14 2 3.3v ground 15 3 ground ps-on 16 4 +5v ground 17 5 ground ground 18 6 +5v ground 19 7 ground -5v 20 8 power good +5v 21 9 5vsb +5v 22 10 +12v +5v 23 11 +12v ground 24 12 +...
Page 19
Installations ip400 user’s manual 15 j7: tv out (df11) signal name pin pin signal name nc 1 2 nc y 3 4 ground c/pr 5 6 ground cvbs/pb 7 8 ground j9: usb7, usb8 port pin header signal name pin pin signal name vcc 1 5 ground d- 2 6 d+ d+ 3 7 d- ground 4 8 vcc j12: usb5, usb6 port pin header signal nam...
Page 20
Installations 16 ip400 user’s manual j17: line out / mic header signal name pin pin signal name r out 1 2 l out gnd 3 4 gnd mic1 7 8 mic2 j18: amp line out header pin # signal name 1 l out 2 ground 3 ground 4 r out j19: cd-in connector pin # signal name 1 cd l 2 ground 3 ground 4 cd r j21: com3, com...
Page 21
Appendix ip400 user’s manual 17.