- DL manuals
- IBASE Technology
- Touch Panel
- IPPCxxA7-RE Series
- User Manual
IBASE Technology IPPCxxA7-RE Series User Manual - Chapter 3 Bios Setup
Copyright © 2013 All Rights Reserved.
27
CHAPTER 3 BIOS SETUP
3.1 BIOS Introduction
The BIOS (Basic Input/Output System
) installed in your computer system’s ROM
supports Intel processors. The BIOS provides critical low-level support for a standard
device such as disk drives, serial ports and parallel ports. It also password protection
as well as special support for detailed fine-tuning of the chipset controlling the entire
system.
3.2 BIOS Setup
The BIOS provides a Setup utility program for specifying the system configurations
and settings. The BIOS ROM of the system stores the Setup utility. When you turn on
the computer, the BIOS is immediately activated. Pressing the key immediately
allows you to enter the Setup utility. If you are a little bit late pressing the key,
POST (Power On Self Test) will continue with its test routines, thus preventing you
from invoking the Setup. If you still wish to enter Setup, restart the system by pressing
the ”Reset” button or simultaneously pressing the
You can also restart by turning the system Off and back On again. The following
message will appear on the screen:
Press to Enter Setup
In general, you press the arrow keys to highlight items,
and
When you enter the Setup utility, the Main Menu screen will appear on the screen.
The Main Menu allows you to select from various setup functions and exit choices.
Summary of IPPCxxA7-RE Series
Page 1
Ippcxxa7-re series user manual.
Page 2
Copyright © 2013 all rights reserved. 2 2 ippcxxa7-re user manual revision release date v0.1 2013/10/28 v0.2 2013/11/21 v0.3 2014/08/19.
Page 3
I ippcxxa7-re user manual copyright © 2013 all rights reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation ke...
Page 4: Table Of Contents
Ii ippcxxa7-re user manual table of contents chapter 1 introduction .................................................................................... 1 1.1 general description ....................................................................................................... 1 1.2 system spec...
Page 5: Safety Information
Copyright © 2013 all rights reserved. Iii safety information your ippc-xxa7-re is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions setting up your system re...
Page 6
Iv ippcxxa7-re user manual care during use do not walk on the power cord or allow anything to rest on it. Do not spill water or any other liquids on your system. When the system is turned off, a small amount of electrical current still flows. Always unplug all power, and network cables from the powe...
Page 7
Copyright © 2013 all rights reserved. V acknowledgments ami is a registered trademark of ami software international, inc. Amd and ati are registered trademarks of amd corporation. Microsoft windows is a registered trademark of microsoft corporation. Fintek is a registered trademark of fintek electro...
Page 9: Chapter 1 Introduction
1 ippcxxa7-re user manual chapter 1 introduction 1.1 general description ippc-xxa7-re series is a fanless design panel pc, powered by intel atom processor d2550 1.86ghz and supporting 2 x so-dimm, up to 4gb ddriii 1066mhz fsb, 4x usb connector, 1x com port, support 1x sata hdd space, 1x pci slot exp...
Page 10
2 ippcxxa7-re user manual 1.2 system specification 1.2.1 hardware specifications model name ippc-12a7-re ippc-15a7-re ippc-17a7-re ippc19a7-re system mainboard ib806 cpu intel atom process d2550 1m cache, 1.86ghz chipset intel nm10 express chipset memory 2 x ddr3 1600mhz dimm, max. 16gb (non-ecc) i/...
Page 11
Copyright © 2013 all rights reserved. 3 1.2.2 dimensions ippc12a7-re ippc15a7-re.
Page 12
4 ippcxxa7-re user manual ippc17a7-re ippc19a7-re.
Page 13
Copyright © 2013 all rights reserved. 5 1.2.3 i/o view.
Page 14
6 ippcxxa7-re user manual.
Page 15
Copyright © 2013 all rights reserved. 7 1.3 packing list part no. Description qty 1 driver cd 1 pc 2 mounting kits 1 set 3 power cord 1 pc 1.4 installation 1.4.1 installing the panel mount.
Page 16
8 ippcxxa7-re user manual.
Page 17
Copyright © 2013 all rights reserved. 9 1.4.2 installing the vesa mount.
Page 18
10 ippcxxa7-re user manual 1.4.3 installing the pci and wifi module.
Page 19
Copyright © 2013 all rights reserved. 11 8. Connect the wifi internal antenna onto the wifi module..
Page 20
12 ippcxxa7-re user manual 9. Push the wifi module into the slot. 10. Use a screwdriver to turn the screw to its unlocked position..
Page 21
Copyright © 2013 all rights reserved. 13 11. Push the internal antenna into the position as picture. 12. Lock the screw as picture..
Page 22
14 ippcxxa7-re user manual 13. Connect the external antenna to its position as picture..
Page 23
Copyright © 2013 all rights reserved. 15 1.4.4 disassembly and assembly of control box and display module.
Page 24
16 ippcxxa7-re user manual.
Page 25
Copyright © 2013 all rights reserved. 17.
Page 26
18 ippcxxa7-re user manual chapter 2 motherboard introduction 2.1 introduction the ib806 embedded flex motherboard is based on the intel® atom cedarview chipset. Cedar trail is a platform that uses the intel cedarview-d or cedarview-m processor and intel nm10 express chipset family in the desktop pl...
Page 27
Copyright © 2013 all rights reserved. 19 usb intel® nm10 pch integrated usb 2.0 host controller: 1. 4 ports in the rear panel 2. 1 port via onboard mini-pcie 3. 2 ports via edge golden-finger for connecting with id910 4. 1 ports via edge golden-finger for connecting with ip930 **total 8 x usb 2.0 po...
Page 28
20 ippcxxa7-re user manual board dimensions 2.2 installing the memory the ib806 board supports two ddr3 memory socket for a maximum total memory of 2gb in ddr3 memory type. Installing and removing memory modules to install the ddr3 modules, locate the memory slot on the board and perform the followi...
Page 29
Copyright © 2013 all rights reserved. 21 2.3 setting jumpers jumpers are used on ib806 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on ib806 a...
Page 30
22 ippcxxa7-re user manual jp4: clear cmos contents jp4 setting function pin 1-2 short/closed normal pin 2-3 short/closed clear cmos 2.4 connectors connector locations on ib806 cn1, cn2: sata connector cn3: gigabit lan (rtl8111e-vl) this rj45 lan connector features for eup lan wakeup..
Page 31
Copyright © 2013 all rights reserved. 23 cn4: db9+crt connector signal name pin # pin # signal name red 1 2 green blue 3 4 n.C. Gnd 5 6 gnd gnd 7 8 gnd vcc 9 10 gnd n.C. 11 12 ddcdata hsync 13 14 vsync ddcclk 15 (com1) is a db-9 connector. Signal name pin # pin # signal name dcd, data carrier detect...
Page 32
24 ippcxxa7-re user manual cn5: mic phone-jack connector cn6: line-out phone-jack connector cn7: gigabit lan (rtl8111e-vl) this rj45 lan connector features for lan wakeup. J2: debug 80 port connector (factory use only) j3: digital i/o 2in/2out connector pin # signal name 1 out2 2 out3 3 in2 4 in3 5 ...
Page 33
Copyright © 2013 all rights reserved. 25 j7: ddr3 so-dimm socket j9: mini pcie connector j10, j11: 12v power connector this connector supplies the cpu operating voltage. Pin # signal name 1 ground 2 ground 3 +12v 4 +12v j13: smart battery interface connector pin # signal name 1 rst 2 extsmi 3 ground...
Page 34
26 ippcxxa7-re user manual jp2: front panel connector the following table shows the pin outs of the 2x4 pin header signal name pin # pin # signal name ground 1 2 pwr_sw pwr_led+ 3 4 pwr_led-(gnd) hdd_led+ 5 6 hdd_led- ground 7 8 reset pcie1: pciex8 goledn finger (includes dvi, usbx2, comx1, lvds sin...
Page 35: Chapter 3 Bios Setup
Copyright © 2013 all rights reserved. 27 chapter 3 bios setup 3.1 bios introduction the bios (basic input/output system ) installed in your computer system’s rom supports intel processors. The bios provides critical low-level support for a standard device such as disk drives, serial ports and parall...
Page 36
28 ippcxxa7-re user manual warning: it is strongly recommended that you avoid making any changes to the chipset defaults. These defaults have been carefully chosen by both ami and your system manufacturer to provide the absolute maximum performance and reliability. Changing the defaults could cause ...
Page 37
Copyright © 2013 all rights reserved. 29 3.3 advanced settings this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio setup utility main advanced chipset boot security save & exit legacy oprom support → ← select ...
Page 38
30 ippcxxa7-re user manual pci subsystem settings aptio setup utility main advanced chipset boot security save & exit pci bus driver version v 2.05.01 → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit pci rom ...
Page 39
Copyright © 2013 all rights reserved. 31 acpi settings aptio setup utility main advanced chipset boot security save & exit enable acpi auto configuration disabled → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: e...
Page 40
32 ippcxxa7-re user manual wake up event settings aptio setup utility main advanced chipset boot security save & exit → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit wake on ring disabled wake on pci pme wak...
Page 41
Copyright © 2013 all rights reserved. 33 cpu configuration this section shows the cpu configuration parameters. Aptio setup utility main advanced chipset boot security save & exit cpu configuration → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3...
Page 42
34 ippcxxa7-re user manual ismart controller aptio setup utility main advanced chipset boot security save & exit ismart controller → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit eup/erp standby power contro...
Page 43
Copyright © 2013 all rights reserved. 35 ide configuration aptio setup utility main advanced chipset boot security save & exit → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit sata port0 not present sata port...
Page 44
36 ippcxxa7-re user manual usb configuration aptio setup utility main advanced chipset boot security save & exit usb configuration → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit usb devices: none legacy usb...
Page 45
Copyright © 2013 all rights reserved. 37 super io configuration aptio setup utility main advanced chipset boot security save & exit w83627uhg super io configuration → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc:...
Page 46
38 ippcxxa7-re user manual ppm configuration aptio setup utility main advanced chipset boot security save & exit ppm configuration → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit eist enabled 3.4 chipset set...
Page 47
Copyright © 2013 all rights reserved. 39 host bridge this section allows you to configure the host bridge chipset. Aptio setup utility main advanced chipset boot security save & exit → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized def...
Page 48
40 ippcxxa7-re user manual intel igd configuration aptio setup utility main advanced chipset boot security save & exit intel igd configuration → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save & exit esc: exit igfx-boot...
Page 49
Copyright © 2013 all rights reserved. 41 south bridge this section allows you to configure the south bridge chipset. Aptio setup utility main advanced chipset boot security save & exit → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized d...
Page 50
42 ippcxxa7-re user manual tpt device aptio setup utility main advanced chipset boot security save & exit → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit azalia controller hd audio select usb mode by control...
Page 51
Copyright © 2013 all rights reserved. 43 pci express root port2 aptio setup utility main advanced chipset boot security save & exit → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit pci express port 2 auto por...
Page 52
44 ippcxxa7-re user manual boot settings aptio setup utility main advanced chipset boot security save & exit boot configuration → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit setup prompt timeout 1 bootup n...
Page 53
Copyright © 2013 all rights reserved. 45 3.5 security settings this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio setup utility main advanced chipset boot security save & exit password description → ← select ...
Page 54
46 ippcxxa7-re user manual 3.6 save & exit settings aptio setup utility main advanced chipset boot security save & exit save changes and exit → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit discard changes a...
Page 55
Copyright © 2013 all rights reserved. 47 chapter 4 drivers installation this section describes the installation procedures for software and drivers. The software and drivers are included with the motherboard. Important note: after installing your windows operating system, you must install first the ...
Page 56
48 ippcxxa7-re user manual 4.2 vga drivers installation 1. Click intel(r) cedarview graphics driver. 2. When the welcome screen appears, click next to continue. 4. Click yes to to agree with the license agreement and continue the installation. 5. On the readme file information screen, click next to ...
Page 57
Copyright © 2013 all rights reserved. 49 4.3 realtek hd audio driver installation 1. Click realtek high definition audio driver. 2. On the welcome to the installshield wizard screen, click next to proceed with and complete the installation process. 4. Restart the computer when prompted..
Page 58
50 ippcxxa7-re user manual 4.4 lan drivers installation 1. Click realtek lan controller driver. 2. Click next to proceed with and complete the installation process. 3. The wizard is ready to begin installation. Click install to begin the installation. 4. When setup is complete, click finish to resta...
Page 59
Copyright © 2013 all rights reserved. 51 4.5 altera fpga driver installation 1. Insert the drivers dvd into the dvd drive. Click intel and then altera fpga drive r. 2. When the welcome to peripheral controller driver 2.0 for windows xp/vista setup wizard screen appears, click next to continue. 3. Wh...