Www.Ibase.Com.Tw ibase technology inc. Ippcxxb9-re series user manual.
Copyright © 2013 ibase technology inc. All rights reserved. 2 2 ippcxxb9-re user manual revision release date v0.1 2014/02/07 v0.2 2014/07/04.
I ippcxxb9-re user manual copyright © 2013 ibase technology inc. All rights reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, e...
Ii ippcxxb9-re user manual table of contents safety information .................................................................................................................. Iii setting up your system .................................................................................................
Copyright © 2013 ibase technology inc. All rights reserved. Iii ibase technology inc. Safety information your ippcxxb9-re is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following sa...
Iv ippcxxb9-re user manual care during use do not walk on the power cord or allow anything to rest on it. Do not spill water or any other liquids on your system. When the system is turned off, a small amount of electrical current still flows. Always unplug all power, and network cables from the powe...
Copyright © 2013 ibase technology inc. All rights reserved. V ibase technology inc. Acknowledgments ami is a registered trademark of ami software international, inc. Amd and ati are registered trademarks of amd corporation. Microsoft windows is a registered trademark of microsoft corporation. Fintek...
1 ippcxxb9-re user manual chapter 1 introduction 1.1 general description ippcxxb9-re series is a fanless panel pc, powered by the 2nd generation intel ® core i3-2340ue that runs at 1.3ghz. It supports 2x so-dimm to fit up to 16gb ddriii 1333mhz fsb memory size, 4x usb connectors, 3x com ports, 1x sa...
2 ippcxxb9-re user manual 1.2 system specification 1.2.1 hardware specifications model name ippc15b9-re ippc17b9-re ippc19b9-re system mainboard ib907 cpu 2nd generation intel ® core tm i3-2340ue chipset intel ® hm76 pch memory 2x ddr3 1333 so-dimm up to 16gb i/o interface 1x dvi-i connector 3x db9 ...
Copyright © 2013 ibase technology inc. All rights reserved. 3 ibase technology inc. 1.2.2 dimensions ippc15b9-re.
4 ippcxxb9-re user manual ippc17b9-re.
Copyright © 2013 ibase technology inc. All rights reserved. 5 ibase technology inc. Ippc19b9-re.
6 ippcxxb9-re user manual 1.2.3 i/o view 1.3 packing list part no. Description quantity 1 terminal block for power input & gpio 2 pcs 2 mounting kits 1 set 3 driver cd 1 pc.
Copyright © 2013 ibase technology inc. All rights reserved. 7 ibase technology inc. 1.4 installation 1.4.1 installing memory 1. Unlock and remove 15 screws as in the picture below and open the back cover. 2. Put the memory module into the socket. 3. Place the memory module into the socket and press ...
8 ippcxxb9-re user manual 1.4.2 installing storage 1. Unlock and remove 15 screws as in the picture below and open the back cover. 2. Unlock and remove 4 screws and sata connector as shown..
Copyright © 2013 ibase technology inc. All rights reserved. 9 ibase technology inc. 1.4.3 installing cfast 1. Unlock and remove the screw as shown. 1.4.4 installing pci slot 1. Unlock and remove 15 screws as in the picture below and open the back cover..
10 ippcxxb9-re user manual 2. Unlock and remove the 2 screws from pci slot cover. 3. Remove the pci slot cover and pci cover bracket from inside. 4. Install the pci card and put on the pci cover bracket and lock the screw. (the image below is for reference only.).
Copyright © 2013 ibase technology inc. All rights reserved. 11 ibase technology inc. 1.4.5 installing wifi module 1. Push the wifi module into the slot and use a screwdriver to turn the screw to its unlocked position. (the image below is for reference only.).
12 ippcxxb9-re user manual 1.4.6 installing the panel mount 1. Please assembly the screw and mounting kit as shawn picture. 2. Install the mounting kit into the panel edge as shawn picture. 3. Put the panel mount from a to e.
Copyright © 2013 ibase technology inc. All rights reserved. 13 ibase technology inc. 4. Put the panel pc into the wall. 5. Lock each screw of the panel mount..
14 ippcxxb9-re user manual 1.4.7 installing the vesa mount 1. The vesa mount holes are compatible with vesa standard - 75x75 and 100x100 2. Put your vesa mounting kit on the red area as shown above. 3. Lock the screws from a to d..
Copyright © 2013 ibase technology inc. All rights reserved. 15 ibase technology inc. Chapter 2 motherboard introduction 2.1 introduction the ib907 motherboard is based on the latest intel® hm76 chipset. The platform supports 3rd generation intel® core processor family with bga1023 packing and featur...
16 ippcxxb9-re user manual usb 2.0 intel ® hm76 integrated usb 2.0 host controller: 1. 4ports in the rear panel (2x usb2.0; 2x usb3.0) 2. 2 ports (usb3.0) via edge golden-finger for connector id912 3. 2 ports via onboard mini-pcie 4. 2 ports via edge golden-finger for connecting with id912 5. 1 port...
Copyright © 2013 ibase technology inc. All rights reserved. 17 ibase technology inc. Onboard button/switch 1x power button watchdog timer yes (256 segments, 0, 1, 2…255 sec/min) power management msp430g2433 power connector standard atx connector for at (default)/atx mode rohs yes golden finger a. Pc...
18 ippcxxb9-re user manual 2.2 installing the memory the ib907 board supports two ddr3 memory sockets for a maximum total memory of 16gb in ddr3 so-dimm memory type. Installing and removing memory modules to install the ddr3 modules, locate the memory slot on the board and perform the following step...
Copyright © 2013 ibase technology inc. All rights reserved. 19 ibase technology inc. 2.3 setting jumpers jumpers are used on ib907 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. T...
20 ippcxxb9-re user manual jp2: com1 rs232 ri/+5v/+12v power setting jp2 setting function pin 1-2 short/closed +12v pin 3-4 short/closed ri pin 5-6 short/closed +5v jp3: com2 rs232 ri/+5v/+12v power setting jp3 setting function pin 1-2 short/closed +12v pin 3-4 short/closed ri pin 5-6 short/closed +...
Copyright © 2013 ibase technology inc. All rights reserved. 21 ibase technology inc. 2.4 connectors connector locations on ib907 cn1: com1 and com2 serial ports pin # signal name rs-232 r2-422 rs-485 1 dcd tx- data- 2 rx tx+ data+ 3 tx rx+ nc 4 dtr rx- nc 5 ground ground ground 6 dsr nc nc 7 rts nc ...
22 ippcxxb9-re user manual cn2: com3 and dvi-i connector signal name pin # pin # signal name data carrier detect 1 6 dsr, data set ready rxd, receive data 2 7 rts, request to send txd, transmit data 3 8 cts, clear to send data terminal ready 4 9 ri, ring indicator gnd, ground 5 10 not used dvi-i sig...
Copyright © 2013 ibase technology inc. All rights reserved. 23 ibase technology inc. Cn8: digital i/o connector (4 in, 4 out) pin # digital i/o 1 vcc5 (1a) 2 in0 3 in1 4 in2 5 in3 6 out0 7 out1 8 out2 9 out3 10 gnd j1: mcu flash connector (factory use only) j2, j3: sata hdd power connector pin # sig...
24 ippcxxb9-re user manual j9: atx power supply connector signal name pin # pin # signal name 3.3v 11 1 3.3v -12v 12 2 3.3v ground 13 3 ground ps-on 14 4 +5v ground 15 5 ground ground 16 6 +5v ground 17 7 ground -5v 18 8 power good +5v 19 9 5vsb +5v 20 10 +12v j8: ddr so-dimm channel a j13: ddr so-d...
Copyright © 2013 ibase technology inc. All rights reserved. 25 ibase technology inc. J17: atx 12v power connector this connector supplies the cpu operating voltage. Pin # signal name 1 ground 2 ground 3 +12v 4 +12v j18: smart battery interface connector pin # signal name 1 rst 2 extsmi 3 ground 4 da...
26 ippcxxb9-re user manual chapter 3 bios setup 3.1 bios introduction the bios (basic input/output system) installed in your computer system’s rom supports intel processors. The bios provides critical low-level support for a standard device such as disk drives, serial ports and parallel ports. It al...
Copyright © 2013 ibase technology inc. All rights reserved. 27 ibase technology inc. 3.3 main settings aptio setup utility – copyright © 2011 american megatrends, inc. Main advanced chipset boot security save & exit bios information choose the system default language → ← select screen ↑↓ select item...
28 ippcxxb9-re user manual advanced settings this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio setup utility main advanced chipset boot security save & exit → ← select screen ↑↓select item enter: select +- c...
Copyright © 2013 ibase technology inc. All rights reserved. 29 ibase technology inc. Pci subsystem settings aptio setup utility main advanced chipset boot security save & exit pci bus driver version v 2.05.02 → ← select screen ↑↓select item enter: select +- change field f1: general help f2: previous...
30 ippcxxb9-re user manual pci express settings aptio setup utility main advanced chipset boot security save & exit pci express device register settings → ← select screen ↑↓select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit relaxed...
Copyright © 2013 ibase technology inc. All rights reserved. 31 ibase technology inc. Link training timeout (us) defines number of microseconds software will wait before polling ‘link training’ bit in link status register. Value range from 10 to 1000 us. Unpopulated links in order to save power, soft...
32 ippcxxb9-re user manual wake up event settings aptio setup utility main advanced chipset boot security save & exit → ← select screen ↑↓select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit wake on ring disabled wake on pci pme wake...
Copyright © 2013 ibase technology inc. All rights reserved. 33 ibase technology inc. Hyper-threading enabled for windows xp and linux (os optimized for hyper-threading technology) and disabled for other os (os not optimized for hyper-threading technology). When disabled, only one thread per enabled ...
34 ippcxxb9-re user manual sata configuration sata devices configuration. Aptio setup utility main advanced chipset boot security save & exit sata controller(s) enabled → ← select screen ↑↓select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save e...
Copyright © 2013 ibase technology inc. All rights reserved. 35 ibase technology inc. Shutdown temperature configuration aptio setup utility main advanced chipset boot security save & exit → ← select screen ↑↓select item enter: select +- change field f1: general help f2: previous values f3: optimized...
36 ippcxxb9-re user manual acoustic management configuration aptio setup utility main advanced chipset boot security save & exit acoustic management configuration → ← select screen ↑↓select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: ex...
Copyright © 2013 ibase technology inc. All rights reserved. 37 ibase technology inc. Xhci hand-off this is a workaround for oses without xhci hand-off support. The xhci ownership change should be claimed by xhci driver. Ehci hand-off enabled/disabled. This is a workaround for oses without ehci hand-...
38 ippcxxb9-re user manual f81866 super io configuration aptio setup utility main advanced chipset boot security save & exit super io configuration → ← select screen ↑↓select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit f81866 super...
Copyright © 2013 ibase technology inc. All rights reserved. 39 ibase technology inc. Cpu ppm configuration aptio setup utility main advanced chipset boot security save & exit cpu ppm configuration → ← select screen ↑↓select item enter: select +- change field f1: general help f2: previous values f3: ...
40 ippcxxb9-re user manual pch-io configuration this section allows you to configure the north bridge chipset. Aptio setup utility mainadvanced chipset boot security save & exit intel pch rc version 1.1.0.0 → ← select screen ↑↓select item enter: select +- change field f1: general help f2: previous v...
Copyright © 2013 ibase technology inc. All rights reserved. 41 ibase technology inc. Pci express configuration aptio setup utility main advanced chipset boot security save & exit pci express configuration → ← select screen ↑↓select item enter: select +- change field f1: general help f2: previous val...
42 ippcxxb9-re user manual usb configuration aptio setup utility mainadvanced chipset boot security save & exit usb configuration → ← select screen ↑↓select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit xhci pre-boot driver disabled ...
Copyright © 2013 ibase technology inc. All rights reserved. 43 ibase technology inc. Pch azalia configuration aptio setup utility mainadvanced chipset boot security save & exit pch azalia configuration → ← select screen ↑↓select item enter: select +- change field f1: general help f2: previous values...
44 ippcxxb9-re user manual graphics configuration aptio setup utility main advanced chipset boot security save & exit graphics configuration → ← select screen ↑↓select item enter: select +- change field f1: general help f2: previous values f3: optimized default f4: save esc: exit igfx vbios version ...
Copyright © 2013 ibase technology inc. All rights reserved. 45 ibase technology inc. Memory configuration aptio setup utility main advanced chipset boot security save & exit memory information → ← select screen ↑↓select item enter: select +- change field f1: general help f2: previous values f3: opti...
46 ippcxxb9-re user manual boot settings this section allows you to configure the boot settings. Aptio setup utility main advanced chipset boot security save & exit boot configuration → ← select screen ↑↓select item enter: select +- change field f1: general help f2: previous values f3: optimized def...
Copyright © 2013 ibase technology inc. All rights reserved. 47 ibase technology inc. Csm parameters this section allows you to configure the boot settings. Aptio setup utility main advanced chipset boot security save & exit → ← select screen ↑↓select item enter: select +- change field f1: general he...
48 ippcxxb9-re user manual security settings this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio setup utility main advanced chipset boot security save & exit password description → ← select screen ↑↓select it...
Copyright © 2013 ibase technology inc. All rights reserved. 49 ibase technology inc. Save & exit settings aptio setup utility main advanced chipset boot security save & exit save changes and exit → ← select screen ↑↓select item enter: select +- change field f1: general help f2: previous values f3: o...
50 ippcxxb9-re user manual chapter 4 drivers installation this section describes the installation procedures for software and drivers. The software and drivers are included with the motherboard. Important note: after installing your windows operating system, you must install first the intel chipset ...
Copyright © 2013 ibase technology inc. All rights reserved. 51 ibase technology inc. 2. Click intel(r) chipset software installation utility.. 3. When the welcome screen to the intel® chipset device software appears, click next to continue..
52 ippcxxb9-re user manual 4. Click yes to accept the software license agreement and proceed with the installation process. 5. On the readme file information screen, click next to continue the installation. 6. The setup process is now complete. Click finish to restart the computer and for changes to...
Copyright © 2013 ibase technology inc. All rights reserved. 53 ibase technology inc. 4.2 vga drivers installation note: before installing the intel(r) 7 series chipset family graphics driver, the microsoft .Net framework 3.5 spi should be first installed. To install the vga drivers, follow the steps...
54 ippcxxb9-re user manual 3. When the welcome screen appears, click next to continue. 4. Click yes to to agree with the license agreement and continue the installation..
Copyright © 2013 ibase technology inc. All rights reserved. 55 ibase technology inc. 5. On the readme file information screen, click next to continue the installation of the intel® graphics media accelerator driver. 6. On setup progress screen, click next to continue. 7. Setup complete. Click finish...
56 ippcxxb9-re user manual 4.3 realtek hd audio driver installation follow the steps below to install the realtek hd audio drivers. 1. Insert the cd that comes with the board. Click intel and then intel(r) 7 series chipset drivers. 2. Click realtek high definition audio driver..
Copyright © 2013 ibase technology inc. All rights reserved. 57 ibase technology inc. 3. On the welcome to the installshield wizard screen, click next to proceed with and complete the installation process. 4. The installshield wizard complete. Click finish to restart the computer and for changes to t...
58 ippcxxb9-re user manual 4.4 lan drivers installation 1. Insert the cd that comes with the board. Click intel and then intel(r) 7 series chipset drivers. 2. Click intel(r) pro lan network driver..
Copyright © 2013 ibase technology inc. All rights reserved. 59 ibase technology inc. 3. Click install drivers and software. 4. When the welcome screen appears, click next..
60 ippcxxb9-re user manual 5. Click next to to agree with the license agreement. 6. Click the checkbox for drivers in the setup options screen to select it and click next to continue..
Copyright © 2013 ibase technology inc. All rights reserved. 61 ibase technology inc. 7. The wizard is ready to begin installation. Click install to begin the installation. 8. When installshield wizard is complete, click finish..
62 ippcxxb9-re user manual 4.5 realtek lan controller drivers installation follow the steps below to install the realtek lan drivers. 1. Insert the cd that comes with the board. Click intel, then lan card, and then realtek lan controller drivers. 2. Click realtek rtl8111e lan drivers..
Copyright © 2013 ibase technology inc. All rights reserved. 63 ibase technology inc. 3.When the welcome screen to installshield wizard appears, click next to start the installation 4.When the installshieldwizard has finished installing the realtek lan drivers, click finish..
64 ippcxxb9-re user manual 4.6 intel® management engine interface follow the steps below to install the intel management engine. 1. Insert the cd that comes with the board. Click intel and then intel(r) amt 8.0 drivers. 2. When the welcome screen to the installshield wizard for intel® management eng...
Copyright © 2013 ibase technology inc. All rights reserved. 65 ibase technology inc. 3. Click yes to to agree with the license agreement. 4. When the setup progress screen appears, click next. Then, click finish when the setup progress has been successfully installed..
66 ippcxxb9-re user manual 4.7 intel® usb 3.0 drivers 1. Insert the cd that comes with the board. Click intel and then intel(r) 7 series chipset drivers. 2. Click intel(r) usb 3.0 drivers..
Copyright © 2013 ibase technology inc. All rights reserved. 67 ibase technology inc. 3. When the welcome screen to the installshield wizard for intel® usb 3.0 extensible host controller driver, click next. 4. Click yes to to agree with the license agreement and continue the installation..
68 ippcxxb9-re user manual 5. On the readme file information screen, click next to continue the installation of the intel® usb 3.0 extensible host controller driver. 6. Setup complete. Click finish to restart the computer and for changes to take effect..
Copyright © 2013 ibase technology inc. All rights reserved. 69 ibase technology inc. 4.8 altera fpga driver installation 1. Insert the drivers dvd into the dvd drive. Click amd and then altera fpga driver. 2. When the welcome to ibase peripheral controller driver 2.0 for windows xp/vista setup wizar...
