IBASE Technology LV-67H User Manual

Manual is about: Mini-ITX

Summary of LV-67H

  • Page 1

    Lv-67h mini-itx motherboard user’s manual edition 1.6 2013/07/10

  • Page 3

    Lv-67h user’s manual -1- copyright copyright 2011, all rights reserved. This document is copyrighted and all rights are reserved. The information in this document is subject to change without prior notice to make improvements to the products. This document contains proprietary information and protec...

  • Page 4: Packing List:

    Lv-67h user’s manual -2- packing list: please check the package content before you starting using the board. Hardware: lv-67h mini-itx motherborad x 1 cable kit: sata cable x 2 (oalsata-l) dc power cable x 1 (oaldc-a) i/o shield x 1 (oplate-lv67e) power cable x 1 (oalatx-p3s2) printed matters: drive...

  • Page 5: Optional Cable:

    Lv-67h user’s manual -3- dual com port cable x 1 (oales-bku2) optional cable: usb cable x 1 (oalusba-1).

  • Page 6: Index

    Lv-67h user’s manual -4- index chapter 1 ..............................................................................7 1.1 .....................................................................................7 1.2 ................................................................................8 1....

  • Page 7

    Lv-67h user’s manual -5- 2.14.2 ........................................................................... 39 2.14.3 .......................................................................... 40 2.15 ............................................................................. 41 chapter 3 ...........

  • Page 8

    Lv-67h user’s manual -6- (this page is left for blank).

  • Page 9: Chapter 1

    Lv-67h user’s manual -7- chapter 1 1.1 lv-67h the 2 nd generation intel of the mini-itx motherboard, supports 2 nd generation intel® core™ i7, core™ i5, core™ i3 and celeron® mobile processor and features intel qm67 chipset, integrated hd graphics, ddr3 memory, realtek high definition audio, serial ...

  • Page 10: 1.2

    Lv-67h user’s manual - 8 - 1.2 general specification form factor mini-itx motherboard cpu 2 nd generation intel® core™ i7, core™ i5, core™ i3 and celeron® mobile processor package type: rpga988b memory 2 x ddriii so-dimm 1066/1333/1600 mhz up to 16gb support non-ecc, unbuffered memory only chipset i...

  • Page 11: 1.3

    Lv-67h user’s manual - 9 - 1.3 unit: inch.

  • Page 12: 1.4

    Lv-67h user’s manual - 10 - 1.4 qm67 w25x64 spi 2 x intel 82574l 1 x rs232/422/485 1 x com & gpio & irda 2 nd generation intel® core™ i7, core™ i5, core™ i3 and celeron® mobile processor 1 x pci express x16 2 x 204-pin ddr3 so-dimm 1066/1333/1600 mhz up to 16gb io w83627dhg-p 1 x lvds 4 x serial ata...

  • Page 13: Chapter 2

    Lv-67h user’s manual - 11 - chapter 2 2.1 ps2 com3+com2 audio spdif com1 + crt usb_rj45_1/2 jfrnt atx pcie x16 sysfan cn_inv sata3 sata6 so-dimm1 dc_in cn_ir cd_in cn_lvds cpufan cn_audio cn_smbus mini_card1 so-dimm2 cn_dvi sata2 sata5 sata1 sata4 mini_card2 simm cn_usb3/4/5 cn_gpio com4 com5/6 cn_l...

  • Page 14: 2.2

    Lv-67h user’s manual - 12 - 2.2 jumper function jrtc cmos operating/clear setting jvlcd panel voltage setting jat power mode select jp1 com1 voltage setting (for pin 9) jp2 com2 voltage setting (for pin 9) jp3 com3 voltage setting (for pin 9) jp4 com4 voltage setting (for pin 9) jcsel1 jcsel2 cn_com...

  • Page 15: 2.3

    Lv-67h user’s manual - 13 - 2.3 2.3.1 connector function remark cpu socket rpga988b for pga988 cpu so-dimm 1/2 204 -pin ddr3 so-dimm socket sata 1/2 7-pin serial ataiii connector sata 3/4/5/6 7-pin serial ataii connector dc_in dc 9~24v input connector 20-pin power input connector atx p/s mode atx 20...

  • Page 16: 2.4

    Lv-67h user’s manual - 14 - 2.4 2.4.1 the board comes with the socket rpga988 for intel sandybridge processor, please follow the instruction to install the cpu properly. 1. Use the flat-type screw drive to unlock the cpu socket unlock way c 2. Follow the pin direction to install the processor on the...

  • Page 17

    Lv-67h user’s manual - 15 - 2.4.2 the board provides 2 x 204-pin ddr3 so-dimm to support 1066/1333/1600mhz ddr3 memory module up to 16gb. Support non-ecc, unbuffered memory only. So-dimm1 so-dimm2.

  • Page 18: 2.5

    Lv-67h user’s manual - 16 - 2.5 the board’s data of cmos can be setting in bios. If the board refuses to boot due to inappropriate cmos settings, here is how to proceed to clear (reset) the cmos to its default values. Jumper: jrtc type: onboard 3-pin jumper jrtc mode 1-2 clear cmos 2-3 normal operat...

  • Page 19: 2.6

    Lv-67h user’s manual - 17 - 2.6 lv-67h has four serial ata ii (sata port3/4/5/6) & twor serial ata iii (sata port1/2) interfaces with raid function, the transfer rate of the serial ata ii can be up to 300mb/s & serial ata iii can be up to 600mb/s. Please go to http://www.Serialata.Org/ for more abou...

  • Page 20: 2.7

    Lv-67h user’s manual - 18 - 2.7 the board integrates with one intel pci express gigabit ethernet controllers, as the pci express x1 can speed up to 250mb/s of transfer rate instead of late pci bus with 133mb/s of transfer rate. The intel gigabit ethernet supports triple speed of 10/100/1000base-t, w...

  • Page 21: 2.8

    Lv-67h user’s manual - 19 - 2.8 based on intel sandy bridge cpu with built-in hd graphic, the board provides one db15 connector on real external i/o port, one 40-pin lvds interface with 5-pin lcd backlight inverter connector and provides 26-pin dvi interface. The board provides dual display function...

  • Page 22

    Lv-67h user’s manual - 20 - cn_inv 2.8.2 the board provides one 40-pin lvds connector for 24-bit single/dual channel panels, supports up to 2048 x 1536 (uxga) resolution, with one lcd backlight inverter connector and one jumper for panel voltage setting. Effective patterns of connection: 1-2 / 3-4 /...

  • Page 23

    Lv-67h user’s manual - 21 - connector: cn_inv connector: jvlcd type: 5-pin lvds power header type: 6-pin power select header pin description 1 +12v 2 reserved (note) 3 gnd 4 gnd 5 enabkl note: reserved for mb internal test please treat it as nc. Connector: cn_lvds type: onboard 40-pin connector for ...

  • Page 24

    Lv-67h user’s manual - 22 - to setup the lcd, you need the component below: 1. A panel with lvds interfaces. 2. An inverter for panel’s backlight power. 3. A lcd cable and an inverter cable. For the cables, please follow the pin assignment of the connector to make a cable, because every panel has it...

  • Page 25: 2.0

    Lv-67h user’s manual - 23 - after setup the devices well, you need to select the lcd panel type in the bios. The panel type mapping is list below: bios panel type selection form (bios version:1.0) single / dual channel single / dual channel no. Output format no. Output format 1 640 x 480 9 1680 x 10...

  • Page 26

    Lv-67h user’s manual - 24 -.

  • Page 27

    Lv-67h user’s manual - 25 - 2.8.3 connector: cn_dvi connector type: 26-pin header connector (pitch = 2.00mm) pin number assignment pin number assignment 1 tx1+ 2 tx1- 3 ground 4 ground 5 txc+ 6 txc- 7 ground 8 pvdd 9 n/c 10 n/c 11 tx2+ 12 tx2- 13 ground 14 ground 15 tx0+ 16 tx0- 17 n/c 18 hpdet 19 d...

  • Page 28: 2.9

    Lv-67h user’s manual - 26 - cdin 4 1 2.9 the board integrates onboard audio interface with realtek alc888 code, with intel next generation of audio standard as high definition audio, it offers more vivid sound and other advantages than former hd audio compliance. The main specifications of alc888 ar...

  • Page 29

    Lv-67h user’s manual - 27 - connector: cn_audio type: 10-pin (2 x 5) header (pitch = 2.54mm) pin description pin description 1 mic_l 2 ground 3 mic_r 4 n/c 5 speaker_r 6 mic detect 7 sense 8 n/c 9 speaker_l 10 speaker detect connector: cdin type: 4-pin header (pitch = 2.54mm) pin description 1 cd – ...

  • Page 30: 2.10

    Lv-67h user’s manual - 28 - 2.10 lv-67h integrates eight usb2.0 ports. The specifications of usb2.0 are listed below: interface usb2.0 controller intel® qm67 transfer rate up to 480mb/s voltage 5v connector: cn_usb3/4/5 type: 10-pin (2 x 5) header (pitch = 2.54mm) pin description pin description 1 v...

  • Page 31

    Lv-67h user’s manual - 29 - connector: jvusb type: 6-pin power select jumper pin description 1-3 & 2-4 5v_sb 3-5 & 4-6 5v default: 1-3 & 2-4 effective patterns of connection: 1-3 & 2-4 or 3-5 & 4-6 warning: others cause damages jvusb 5 1 6 2 5 1 5 1 6 2 6 2.

  • Page 32: 2.11

    Lv-67h user’s manual - 30 - 2.11 the board supports three rs232 serial port and one jumper selectable rs232/422/485 serial ports. The jumper jcsel1 & jcsel2 can let you configure the communicating modes for com2. Connector: com1/3 type: 9-pin d-sub male connector on bracket for com1/3 pin descriptio...

  • Page 33

    Lv-67h user’s manual - 31 - cn_com4 jcsel1 jp1 jcsel2 1 cn_com5/6 2 6 1 5 1 1 2 2 2 19 20 9 10 5 6 12 11 2 1 10 9 1 2 jp4 jp3 j2 2 6 1 5 2 6 1 5.

  • Page 34: Irda

    Lv-67h user’s manual -32- jumper: jp1/jp2/jp3/jp4 (com1/2/3/4) type: onboard 6-pin header function jcsel2 jcsel1 irda rs-422 rs-485 rs-232 power mode jp1/2/3/4 pin 9 with 5v power 1-2 pin 9 with 12v power 3-4 standard com port 5-6 default setting 8 7 1 2 8 7 1 2 8 7 1 2 8 7 1 2 12 11 2 1 12 11 2 1 d...

  • Page 35: 2.12

    Lv-67h user’s manual - 33 - 2.12 the board provides two pcie mini card sockets and a sim socket. Mini_card1 is the first mini-pcie slot for long size mini-pcie cards. Please be noted that the mpx-sdvod card must be placed in this slot. The mpx-sdvod card will not work if it is placed in other slot. ...

  • Page 36

    Lv-67h user’s manual - 34 - connector: simm type: 6-pin sim socket pin description pin description 1 simvcc 2 simrst 3 simclk 4 nc 5 gnd 6 simvpp 7 simdata 6 5 7 3 1 2 mini_card1 mini_card2.

  • Page 37

    Lv-67h user’s manual - 35 - 2.12.1 step1. Sim card holder is marked by circle. Slide the cap toward open direction. Step 2. Make sure that the cap is now at the open position. Step 3. Flip the cap up for inserting a sim card into..

  • Page 38

    Lv-67h user’s manual - 36 - step 4. Insert a sim card as shown in the photo. Be sure that the corner cut is on top and the golden pads are up. Step 5. Now, flip down the cap as shown in the photo. Step 6. Press down and slide the cap to the close position. Be sure that the cap is tightly held with t...

  • Page 39: 2.13

    Lv-67h user’s manual - 37 - 2.13 the board provides a programmable 8-bit digital i/o interface; you can use this general purpose i/o port for system control like pos or kiosk. Connector: cn_dio type: 12-pin (6 x 2) header (pitch = 2.0mm) pin description pin description 1 ground 2 ground 3 gp10 4 gp1...

  • Page 40: 2.14

    Lv-67h user’s manual - 38 - 2.14 2.14.1 the board requires onboard 4-pin dc-input connector voltage range is from 9v to 24v, or onboard 20-pin atx2.0, for the input current, please take a reference of the power consumption report on appendix. Connector: dc_in type: 4-pin dc power connector pin descr...

  • Page 41

    Lv-67h user’s manual - 39 - 2.14.2 the board provides one 20-pin atx connector for +5v/+12v output for powering your hdd, cdrom or other devices. Attention: when dc-in had power supplied, the atx become output ! Avoid dc-in and atx power supply input at the same time ! Connector: atx (when dc-in be ...

  • Page 42

    Lv-67h user’s manual - 40 - 2.14.3 the board provides one 4-pin fan connectors supporting smart fan for cpu cooler and one 3-pin cooler fan connectors for system. Connector: cpufan type: 4-pin fan wafer connector pin description pin description 1 ground 2 +12v 3 fan speed detection 4 fan control con...

  • Page 43: 2.15

    Lv-67h user’s manual - 41 - 2.15 the jfrnt provides front control panel of the board, such as power button, reset and beeper, etc. Please check well before you connecting the cables on the chassis. Connector: jfrnt type: onboard 14-pin (2 x 7) 2.54-pitch header function signal pin signal function hd...

  • Page 44: Chapter 3

    Lv-67h user’s manual - 42 - chapter 3 3.1 the board integrates intel® qm67 with realtek® alc888 code. It can support 2-channel sound under system configuration. Please follow the steps below to setup your sound system. 1. Install realtek hd audio driver. 2. Lunch the control panel and sound effect m...

  • Page 45: 3.2

    Lv-67j user’s manual -43- 3.2 based on intel qm67 with hd graphic, the board supports two dacs for display device as different resolution and color bit. Please install the intel graphic driver before you starting setup display devices. 1. Click right button on the desktop to lunch display properties...

  • Page 46

    Lv-67j user’s manual -44- 3. This setup options can let you define each device settings. Click monitor to setup the crt monitor for resolution and refresh rate click intel® dual display clone to setup the dual display mode as same screen.

  • Page 47: 3.3

    Lv-67j user’s manual -45- 3.3 sata mode: this option can let you select whether the serial ata hard drives would work under normal ide mode or raid mode. The raid mode need more than one hdd is applied..

  • Page 48: 3.4

    Lv-67j user’s manual -46- 3.4 the board integrates intel® qm67 pch with raid function for serial ata drives, and supports the configurations below: raid 0 (stripping): two hard drives operating as one drive for optimized data r/w performance. It needs two unused drives to build this operation. Raid ...

  • Page 49

    Lv-67j user’s manual -47- please press to enter the raid configuration menu. You can setup the raid under operation system for microsoft® windows xp sp1 , please install the intel® application accelerator ver.4.5 later to support raid configuration with intel® matrix storage technology..

  • Page 50: Chapter 4

    Lv-67h user’s manual - 48 - chapter 4 the motherboard uses the phoenix bios for the system configuration. The phoenix bios in the single board computer is a customized version of the industrial standard bios for ibm pc at-compatible computers. It supports intel x86 and compatible cpu architecture ba...

  • Page 51

    Lv-67h user’s manual - 49 - (this page is left for blank).

  • Page 52: Appendix A

    Lv-67h user’s manual - 50 - appendix a a.1 connector: sata1/2/3/4/5/6 type: 7-pin wafer connector 1 2 3 4 5 6 7 gnd rsata_txp1 rsata_txn1 gnd rsata_rxn1 rsata_rxp1 gnd a.2 connector: cn_ir type: 5-pin header for sir ports a.3 connector: crt type: 15-pin d-sub female connector on bracket pin descript...

  • Page 53: A.5

    Lv-67h user’s manual - 51 - a.5 connector: com4 type: 9-pin d-sub male connector on bracket for com1 pin description pin description 1 dcd4 2 rxd4 3 txd4 4 dtr4 5 gnd 6 dsr4 7 rts4 8 cts4 9 ri4 10 n/c connector: com5/6 type: 20-pin (2 x 10) header pitch = 2.54x1.27mm pin description pin description ...

  • Page 54

    Lv-67h user’s manual - 52 - connector: jatc1/2 type: 5-pin header for lan activity led connector pin description 1 led- 2 led+ 1 2.

  • Page 55: Appendix B

    Lv-67h user’s manual - 53 - appendix b b.1 the board is based on phoenix bios and can be updated easily by the bios auto flash tool. You can download the tool online at the address below: http://www.Phoenix.Com/en/home/ http://www.Commell.Com.Tw/support/support_sbc.Htm file name of the tool is “phla...

  • Page 56: Appendix C

    Lv-67h user’s manual - 54 - appendix c c.1.

  • Page 57

    Lv-67h user’s manual - 55 -.

  • Page 58: C.2

    Lv-67h user’s manual - 56 - c.2.

  • Page 59: C.3

    Lv-67h user’s manual - 57 - c.3 dma: irq:.

  • Page 60: Appendix D

    Lv-67h user’s manual - 58 - appendix d the gpio’can be programmed with the msdos debug program using simple in/out commands.The following lines show an example how to do this. Gpio0…..Gpio7 bit0……bit7 -o 2 e 87 ;enter configuration -o 2e 87 -o 2e 07 -o 2f 09 ;enale gpio function -o 2e 30 -o 2f 02 ;e...

  • Page 61: Appendix E

    Lv-67h user’s manual - 59 - appendix e the watchdog timer makes the system auto-reset while it stops to work for a period. The integrated watchdog timer can be setup as system reset mode by program. Timeout value range - 1 to 255 - second or minute program sample watchdog timer setup as system reset...

  • Page 62: Contact Information

    Lv-67h user’s manual - 60 - contact information any advice or comment about our products and service, or anything we can help you please don’t hesitate to contact with us. We will do our best to support you for your products, projects and business. Taiwan commate computer inc. Address 19f., no.94, s...