1. DL manuals
  2. IBASE Technology
  3. Motherboard
  4. MB930-R
  5. User Manual

IBASE Technology MB930-R User Manual

Manual is about: MB930 series Socket LGA775 Intel Q35 Chipset Industrial Motherboard

Summary of MB930-R

  • Page 1

    Mb930 (mb930-r, mb930f-r, mb930gf-r, mb930rf-r) socket lga775 intel ® q35 chipset industrial motherboard user’s manual version 1.0

  • Page 2

    Acknowledgments award is a registered trademark of award software international, inc. Ps/2 is a trademark of international business machines corporation. Intel are registered trademarks of intel corporation. Microsoft windows is a registered trademark of microsoft corporation. Winbond is a registere...

  • Page 3: Introduction

    Mb930-r user’s manual iii table of contents introduction .......................................................1 checklist..............................................................................1 product description.............................................................1 specifications ...

  • Page 4

    Iv mb930-r user’s manual ordering information: model ich sata intel lanphy pci-e gigabit lan remarks remarks mb930-r ich9 4 82562v/ 10/100 n/a mb930f-r ich9 4 82566dm(1g) pci-e gbe ( me88e8053 ) mb930gf-r ich9 4 82566dm(1g) pci-e gbe ( me88e8053) pcb thickness: 2.5mm; other specs same as mb930f-r mb...

  • Page 5: Introduction

    Introduction mb930-r user’s manual 1 introduction checklist your mb930-r/mb930f-r/mb930rf-r motherboard package should include the items listed below: • the mb930-r/mb930f-r/mb930rf-r motherboard • this user’s manual • 1 back i/o shield • 1 ide cable • 1 floppy cable • 1 sata cable • 1 serial-port c...

  • Page 6

    Introduction 2 mb930-r user’s manual product description the mb930 lga 775 motherboard incorporates the intel q35 chipset that can utilize a single lga775 processor of up to 4.0ghz or higher and supports fsb frequency of 800/1066mhz/1333mhz (200mhz(800mt/s) and 266mhz(1066mt/s), 333mhz(1333mt/s) hcl...

  • Page 7

    Introduction mb930-r user’s manual 3 specifications product name mb930-r/mb930f-r/mb930rf-r cpu support socket lga775, supports the intel core 2 duo and intel core2 quad processors, and intel celeron 400 (conroe-l) sequence processor. Cpu voltage 0.5v~1.6v (vrd 11.0) system speed up to 3.8ghz+ cpu f...

  • Page 8

    Introduction 4 mb930-r user’s manual board dimensions.

  • Page 9: Installations

    Installations mb930-r user’s manual 5 installations this section provides information on how to use the jumpers and connectors on the mb930-r/mb930f-r/mb930rf-r in order to set up a workable system. The topics covered are: installing the cpu..............................................................

  • Page 10

    Installations 6 mb930-r user’s manual installing the cpu the mb930-r/mb930f-r/mb930rf-r motherboard support an lga 775 processor socket for intel core 2 duo and intel core2 quad processors, and intel celeron 400(conroe-l) sequence processor. The lga 775 processor socket comes with a lever to secure ...

  • Page 11

    Installations mb930-r user’s manual 7 atx power installation the system power is provided to the motherboard with the atx1 and atx_12v power connectors. Atx1 is a 24-pin power connector and atx_12v is a 8-pin 12v power connector. The 24-pin power connector can to be connected to a standard 20-pin at...

  • Page 12

    Installations 8 mb930-r user’s manual installing the memory the mb930-r/mb930f-r/mb930rf-r motherboard support four ddr2 memory sockets for a maximum total memory of 8gb in ddr memory type. It supports ddr2 667/800. Basically, the system memory interface has the following features: supports two 64-b...

  • Page 13

    Installations mb930-r user’s manual 9 setting the jumpers jumpers are used on mb930-r/mb930f-r/mb930rf-r to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the con...

  • Page 14

    Installations 10 mb930-r user’s manual jumper locations............................................................................. Page jp1: com1 rs232 +5v/+12v power setting..................................... 11 jp2: rs232/422/485 (com2) selection.............................................. 1...

  • Page 15

    Installations mb930-r user’s manual 11 jp1: com1 rs232 +5v/+12v power setting jp1 setting function pin 1-2 short/closed +12v pin 3-4 short/closed normal pin 5-6 short/closed +5v jp2: rs232/422/485 (com2) selection com1 is fixed for rs-232 use only. Jp2, com2 is selectable for rs232, rs-422 and rs-48...

  • Page 16

    Installations 12 mb930-r user’s manual jp4: clear cmos contents use jp4, a 3-pin header, to clear the cmos contents. Note that the atx-power connector should be disconnected from the motherboard before clearing cmos. Jp4 setting function pin 1-2 short/closed normal pin 2-3 short/closed clear cmos jp...

  • Page 17

    Installations mb930-r user’s manual 13 jp10: compact flash socket master/slave setting jp10 compact flash master slave jp12: com3 rs232 +5v/+12v power setting jp12 setting function pin 1-2 short/closed +12v pin 3-4 short/closed normal pin 5-6 short/closed +5v.

  • Page 18

    Installations 14 mb930-r user’s manual connectors on mb930-r the connectors on mb930-r/mb930f-r/mb930rf-r allow you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. Atx1: 24-pin atx power connector................................................. 16 ...

  • Page 19

    Installations mb930-r user’s manual 15 connectors on mb930-r/mb930-rf atx1: 24-pin atx power connector atx_12v1: atx 12v power connector dimm1,2: channel a ddr2 socket dimm3,4 channel b ddr2 socket cn1: ps/2 keyboard and ps/2 mouse cn2: serial ports(com1) cn3: parallel port connector cn4: vga crt co...

  • Page 20

    Installations 16 mb930-r user’s manual mb930-r edge connectors mb930f-r/mb930rf-r/mb930gf-r edge connectors atx1: 24-pin atx power connector signal name pin # pin # signal name 3.3v 13 1 3.3v -12v 14 2 3.3v ground 15 3 ground ps-on 16 4 +5v ground 17 5 ground ground 18 6 +5v ground 19 7 ground -5v 2...

  • Page 21

    Installations mb930-r user’s manual 17 dimm1, 2: channel a ddr2 socket dimm1, 2 are the first-channel ddr2 sockets. Dimm3, 4 channel b ddr2 socket dimm3, 4 are the second-channel ddr2 sockets. Cn1: ps/2 keyboard and ps/2 mouse connectors keyboard signal pin # mouse signal keyboard data 1 mouse data ...

  • Page 22

    Installations 18 mb930-r user’s manual cn3: parallel port connector cn3 is a db-25 external connector situated on top of the vga and serial ports. Cn3 parallel port signal name pin # pin # signal name line printer strobe 1 14 autofeed pd0, parallel data 0 2 15 error pd1, parallel data 1 3 16 initial...

  • Page 23

    Installations mb930-r user’s manual 19 cn5: hd audio connector cn6: 10/100 rj-45&usb 0/1 connector (mb930-r) cn6: gbe rj-45 &usb 0/1 connector (mb930f-r/ mb930gf-r/mb930rf-r) cn7: usb2/3 connector (mb930-r).

  • Page 24

    Installations 20 mb930-r user’s manual cn7: marvell gbe rj-45&usb2/3 connector (mb930f-r/ mb930gf-r /mb930rf-r) cn8, cn9, cn10, cn11, cn12,cn13 sata connector pin # signal name 1 ground 2 tx+ 3 tx- 4 ground 5 rx- 6 rx+ 7 ground note: mb930-r, mb930f-r supports 4x sata ii (300mb/s) ,s_ata1,2,5,6 . Mb...

  • Page 25

    Installations mb930-r user’s manual 21 j2: com2 serial port com2 is jumper selectable for rs-232, rs-422 and rs-485. Please refer to jp2: rs232/422/485 (com2) selection pin # signal name rs-232 r2-422 rs-485 1 dcd tx- data- 2 rx tx+ data+ 3 tx rx+ nc 4 dtr rx- nc 5 ground ground ground 6 dsr rts- nc...

  • Page 26

    Installations 22 mb930-r user’s manual j6: usb6/usb7 connector the following table shows the pin outs of the usb pin header. Signal name pin pin signal name vcc 1 5 ground usb0- 2 6 usb1+ usb0+ 3 7 usb1- j6 ground 4 8 vcc j7: usb4/usb5 connector signal name pin pin signal name vcc 1 5 ground usb0- 2...

  • Page 27

    Installations mb930-r user’s manual 23 j11: wake on lan connector j11 is a 3-pin header for the wake on lan function on the motherboard. The following table shows the pin out assignments of this connector. Wake on lan will function properly only with an atx power supply with 5vsb that has 1a. Pin # ...

  • Page 28

    Installations 24 mb930-r user’s manual power led: pins 11 - 13 the power led indicates the status of the main power switch. Pin # signal name 11 power led 12 no connect 13 ground atx power on switch: pins 7 and 17 this 2-pin connector is an “atx power supply on/off switch” on the system that connect...

  • Page 29

    Installations mb930-r user’s manual 25 j13: isa slot isa slot does not support isa master & dma access function, but only isa peripheral cards. Jp11: spdifi/ spdifo connector (reserved) pin # signal name 1 spdif/i 2 ground 3 spdif/o 4 ground ide1: primary ide connectors signal name pin # pin # signa...

  • Page 30

    Installations 26 mb930-r user’s manual cpu_fan1: cpu fan power connector pin # signal name 1 ground 2 +12v 3 rotation detection 4 control sys_fan1: system fan1 power connector pin # signal name 1 ground 2 +12v 3 rotation detection sys_fan2: system fan2 power connector fdd1: floppy drive connector si...

  • Page 31

    Installations mb930-r user’s manual 27 pcie_1: x16 pci express slot pcie_2: x1 pci express slots pci1, pci2, pci3, pci4: pci slots.

  • Page 32

    Installations 28 mb930-r user’s manual watchdog timer configuration the wdt is used to generate a variety of output signals after a user programmable count. The wdt is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock. Under these sorts of circ...

  • Page 33

    Installations mb930-r user’s manual 29 printf("system will reset after %d seconds", btime); enablewdt(btime); return 0; } //======================================================================= void copyright(void) { printf("======== winbond 83627ehf watch timer tester (auto detect) ========...

  • Page 34

    Installations 30 mb930-r user’s manual //======================================================================= // // this code and information is provided "as is" without warranty of any // kind, either expressed or implied, including but not limited to the // implied warranties of merchantability...

  • Page 35

    Installations mb930-r user’s manual 31 lock_w627ehf(); } //======================================================================= void set_w627ehf_reg( unsigned char reg, unsigned char data) { unlock_w627ehf(); outportb(w627ehf_index_port, reg); outportb(w627ehf_data_port, data); lock_w627ehf(); } ...

  • Page 36

    Installations 32 mb930-r user’s manual file of the main.Cpp //===================================================================== // this code and information is provided "as is" without warranty of any // kind, either expressed or implied, including but not limited to the // implied warranties of...

  • Page 37: Bios Setup

    Bios setup mb930-r user’s manual 33 bios setup this chapter describes the different settings available in the award bios that comes with the board. The topics covered in this chapter are as follows: bios introduction ........................................................................ 34 bios se...

  • Page 38

    Bios setup 34 mb930-r user’s manual bios introduction the award bios (basic input/output system) installed in your computer system’s rom supports intel processors. The bios provides critical low-level support for a standard device such as disk drives, serial ports and parallel ports. It also adds vi...

  • Page 39

    Bios setup mb930-r user’s manual 35 phoenix - awardbios cmos setup utility standard cmos features frequency/voltage control advanced bios features load fail-safe defaults advanced chipset features load optimized defaults integrated peripherals set supervisor password power management setup set user ...

  • Page 40

    Bios setup 36 mb930-r user’s manual standard cmos setup “standard cmos setup” choice allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the motherboard is already installed in a working system, you will not need to select t...

  • Page 41

    Bios setup mb930-r user’s manual 37 to set the date, highlight the “date” field and use the pageup/ pagedown or +/- keys to set the current time. Time the time format is: hour : 00 to 23 minute : 00 to 59 second : 00 to 59 to set the time, highlight the “time” field and use the / or +/- keys to set ...

  • Page 42

    Bios setup 38 mb930-r user’s manual drive a / drive b these fields identify the types of floppy disk drive a or drive b that has been installed in the computer. The available specifications are: 360kb 5.25 in. 1.2mb 5.25 in. 720kb 3.5 in. 1.44mb 3.5 in. 2.88mb 3.5 in. Video this field selects the ty...

  • Page 43

    Bios setup mb930-r user’s manual 39 advanced bios features this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Phoenix - awardbios cmos setup utility advanced bios features cpu feature removable device priority pres...

  • Page 44

    Bios setup 40 mb930-r user’s manual first/second/third boot device these fields determine the drive that the system searches first for an operating system. The options available include removable, hard disk, cdrom, legacy lan and disabled. Boot other device these fields allow the system to search fo...

  • Page 45

    Bios setup mb930-r user’s manual 41 security option this field allows you to limit access to the system and setup. The default value is setup. When you select system, the system prompts for the user password every time you boot up. When you select setup, the system always boots up and prompts for th...

  • Page 46

    Bios setup 42 mb930-r user’s manual advanced chipset features this setup menu controls the configuration of the chipset. Phoenix - awardbios cmos setup utility advanced chipset features dram timing selectable by spd item help cas latency time auto dram ras# to cas# delay dram ras# precharge precharg...

  • Page 47

    Bios setup mb930-r user’s manual 43 system memory frequency this field sets the frequency of the dram memory installed. The default setting is auto. The other settings are ddr667 and ddr800. System bios cacheable the setting of enabled allows caching of the system bios rom at f000h-fffffh, resulting...

  • Page 48

    Bios setup 44 mb930-r user’s manual integrated peripherals this section sets configurations for your hard disk and other integrated peripherals. The first screen shows three main items for user to select. Once an item selected, a submenu appears. Details follow. Phoenix - awardbios cmos setup utilit...

  • Page 49

    Bios setup mb930-r user’s manual 45 2 nd super io device onboard serial port 3 230h item help serial port 3 use irq irq10 menu level > onboard serial port 4 238h serial port 4 use irq irq11 phoenix - awardbios cmos setup utility usb device setting usb 1.0 controller enabled item help usb 2.0 control...

  • Page 50

    Bios setup 46 mb930-r user’s manual sata mode the setting choices for the sata mode are ide, raid and ahci mode. Select [ide] if you want to have sata function as ide. Select [ahci] for advanced host controller interface (ahci) feature, with improved sata performance with native command queuing & na...

  • Page 51

    Bios setup mb930-r user’s manual 47 onboard serial/parallel port these fields allow you to select the onboard serial and parallel ports and their addresses. The default values for these ports are: serial port 1 3f8/irq4 serial port 2 2f8/irq3 serial port 3 230/irq10 serial port 4 238/irq11 parallel ...

  • Page 52

    Bios setup 48 mb930-r user’s manual power management setup phoenix - awardbios cmos setup utility power management setup acpi function enabled item help acpi suspend run vgabios if s3 resume s1(pos) auto menu level > power management user define video off method v/h sync+blank video off in suspend y...

  • Page 53

    Bios setup mb930-r user’s manual 49 power management this field allows you to select the type of power saving management modes. There are four selections for power management. Min. Power saving minimum power management max. Power saving maximum power management. User define each of the ranges is fro...

  • Page 54

    Bios setup 50 mb930-r user’s manual cpu thrm-throttling when the system enters doze mode, the cpu clock runs only part of the time. You may select the percent of time that the clock runs. Wake up by pci card by default, this field is disabled. Power on by ring this field enables or disables the powe...

  • Page 55

    Bios setup mb930-r user’s manual 51 pnp/pci configurations this option configures the pci bus system. All pci bus systems on the system use int#, thus all installed pci cards must be set to this value. Phoenix - awardbios cmos setup utility pnp/pci configurations pnp os installed no item help init d...

  • Page 56

    Bios setup 52 mb930-r user’s manual pc health status phoenix - awardbios cmos setup utility pc health status shutdown temperature cpu warning temperature disabled disabled item help current system temp 32°c/89°f menu level > current cpu temp system fan speed 39°c/102°f 0 rpm cpu fan speed 4440 rpm s...

  • Page 57

    Bios setup mb930-r user’s manual 53 frequency/voltage control phoenix - awardbios cmos setup utility frequency/voltage control auto detect pci clk disabled item help spread spectrum disabled menu level > auto detect pci clk this field enables or disables the auto detection of the pci clock. Spread s...

  • Page 58

    Bios setup 54 mb930-r user’s manual load fail-safe defaults this option allows you to load the troubleshooting default values permanently stored in the bios rom. These default settings are non-optimal and disable all high-performance features. Load optimized defaults this option allows you to load t...

  • Page 59: Drivers Installation

    Drivers installation mb930-r user’s manual 55 drivers installation this section describes the installation procedures for software and drivers under the windows 2000, windows xp and windows vista. The software and drivers are included with the board. If you find the items missing, please contact the...

  • Page 60

    Drivers installation 56 mb930-r user’s manual intel chipset software installation utility the intel® chipset drivers should be installed first before the software drivers to enable plug & play inf support for intel chipset components. Follow the instructions below to complete the installation under ...

  • Page 61

    Drivers installation mb930-r user’s manual 57 4. Click yes to accept the software license agreement and proceed with the installation process. 5. On the readme information screen, click next to continue the installation. 6. When the setup progress screen appears, click next to continue. 7. The setup...

  • Page 62

    Drivers installation 58 mb930-r user’s manual intel graphics driver installation to install the graphics drivers, follow the steps below to proceed with the installation. 1. Insert the dvd that comes with the board. Click intel chipsets and then intel(r) bearlake chipset family drivers. 2. Click int...

  • Page 63

    Drivers installation mb930-r user’s manual 59 realtek hd code audio driver installation follow the steps below to install the realtek high definition codec audio driver. 1. Insert the dvd that comes with the board. Click intel chipsets and then intel(r) bearlake chipset family drivers. 2. Click real...

  • Page 64

    Drivers installation 60 mb930-r user’s manual lan drivers installation follow the steps below to start installing the intel 82566dm or intel 82562v drivers. 1. Insert the dvd that comes with the board. Click intel chipsets and then intel(r) bearlake chipset family drivers. 2. Click intel(r) pro lan ...

  • Page 65

    Drivers installation mb930-r user’s manual 61 follow the steps below to use the wake up function by intel 82566dm or intel 82562v. 1. The bios setup item “wake-up by pci card” has to be set as [enabled] . 2. Go to the device manager under windows and select network adapters. The following window wil...

  • Page 66

    Drivers installation 62 mb930-r user’s manual follow the steps below to install the marvell gigabit lan drivers. 1. Insert the dvd that comes with the board. Click lan card and then marvell lan controller driver. 2. Click next when the installshield wizard welcome screen appears. 3. Click next to ag...

  • Page 67: Appendix

    Appendix mb930-r user’s manual 63 appendix a. I/o port address map each peripheral device in the system is assigned a set of i/o port addresses that also becomes the identity of the device. The following table lists the i/o port addresses used. Address device description 000h - 01fh dma controller #...

  • Page 68

    Appendix 64 mb930-r user’s manual b. Interrupt request lines (irq) peripheral devices use interrupt request lines to notify cpu for the service required. The following table shows the irq used by the devices on board. Level function irq0 system timer output irq1 keyboard irq2 interrupt cascade irq3 ...