1. DL manuals
  2. IBASE Technology
  3. Motherboard
  4. MI805
  5. User Manual

IBASE Technology MI805 User Manual

Manual is about: Intel Celeron QC J1900 Mini-ITX Motherboar

Summary of MI805

  • Page 1

    Mi805 intel® celeron® qc j1900 mini-itx motherboard user’s manual version 1.1.

  • Page 2

    Ii mi805 user’s manual acknowledgments ami bios is a trademark of american megatrends inc. Ps/2 is a trademark of international business machines corporation. Intel and luna-pier are registered trademarks of intel corporation. Microsoft windows is a registered trademark of microsoft corporation. Win...

  • Page 3: Introduction

    Mi805 user’s manual iii table of contents introduction ....................................................... 1 checklist .............................................................................. 2 mi805 specifications .......................................................... 3 board dimensio...

  • Page 4

    Iv mi805 user’s manual this page is intentionally left blank..

  • Page 5: Introduction

    Introduction mi805 user’s manual 1 introduction mi805 is a mini itx board (170mm x 170mm) that comes with the intel intel® celeron® qc j1900 processor that runs at 2.0ghz and has two ddr3 so-dimm sockets supporting up to 8gb of system memory. It supports the intel® gen7 w/ 4eus graphics engine with ...

  • Page 6

    Introduction 2 mi805 user’s manual checklist your mi805 package should include the items listed below. The mi805 mini-itx motherboard this user’s manual 1 cd containing chipset drivers and flash memory utility serial ata cable i/o shield.

  • Page 7

    Introduction mi805 user’s manual 3 mi805 specifications product name mi805f-d form factor mini-itx soc type/speed intel® celeron® qc j1900 /2mb l2 cache/2.0 ghz [tdp=10w] package = fcbga1170,type-3, 25mmx27mm, 22nm bios ami bios memory 2 xddr3 so-dimm sockets [horizontal type] maximum to ddr3 l -133...

  • Page 8

    Introduction 4 mi805 user’s manual watchdog timer yes (256 segments, 0, 1, 2…255 sec/min) power connector +12v ~ +24v dc-in ( + 10%) ** when power input @ +12v, there is no tolerance** ismart ver. 3.0 1. Eup / erp (thru super i/o) 2. Auto-scheduler 3. Power fail detector 4. Low temperature guardian ...

  • Page 9

    Introduction mi805 user’s manual 5 board dimensions.

  • Page 10: Installations

    Installations 6 mi805 user’s manual installations this section provides information on how to use the jumpers and connectors on the mi805 in order to set up a workable system. The topics covered are: installing the memory ..................................................................... 7 settin...

  • Page 11

    Installations mi805 user’s manual 7 installing the memory the mi805 board supports two ddr3-1333 memory slots. Remarks: j1900 supports two so-dimm (w/o ecc) modules. Total maximum memory supported is 8gb. Installing and removing memory modules to install the ddr3 modules, locate the memory slot on t...

  • Page 12

    Installations 8 mi805 user’s manual setting the jumpers jumpers are used on mi805 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on mi805 and th...

  • Page 13

    Installations mi805 user’s manual 9 jumper locations on mi805 jumper locations on mi805 ............................................................. Page j1: lcd backlight adjustment ........................................................... 10 jp2: lvds panel brightness control selection ...........

  • Page 14

    Installations 10 mi805 user’s manual j1: lcd backlight adjustment j1 setting panel voltage pin 1-2 short/closed dc mode (default) pin 2-3 short/closed pwm mode jp2: lvds panel brightness control selection jp2 brightness control (pwm mode) open 3.3v close 5v(default) 1 3.

  • Page 15

    Installations mi805 user’s manual 11 j6: lvds panel power selection j5 setting panel voltage pin 1-2 short/closed 3.3v (default) pin 2-3 short/closed 5v jp4/jp5: com1/com2 rs232 ri/+5v/+12v power setting jp4/jp5 setting function pin 1-3 - short/closed +12v pin 3-4 - short/closed ri pin 3-5 - short/c...

  • Page 16

    Installations 12 mi805 user’s manual jp6: clear cmos contents jp6 setting function pin 1-2 short/closed normal pin 2-3 short/closed clear cmos jp7: clear me contents jp7 setting function pin 1-2 short/closed normal pin 2-3 short/closed clear me register 1 3 1 3.

  • Page 17

    Installations mi805 user’s manual 13 jp8: factory use only.

  • Page 18

    Installations 14 mi805 user’s manual connectors on mi805 the connectors on mi805 allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on mi805 and their respective functions. Connector locations on mi80...

  • Page 19

    Installations mi805 user’s manual 15 connector locations on mi805.

  • Page 20

    Installations 16 mi805 user’s manual cn1 / cn2: sata2 connector cn3: dc_in connector +12v~24v cn4: crt+dvi connector signal name pin # pin # signal name red 1 2 green blue 3 4 n.C. Gnd 5 6 gnd gnd 7 8 gnd vcc 9 10 gnd n.C. 11 12 ddcdata hsync 13 14 vsync ddcclk 15.

  • Page 21

    Installations mi805 user’s manual 17 signal name pin # pin # signal name data2- 1 2 data2+ gnd 3 4 n.C. N.C. 5 6 ddcclk ddcdata 7 8 n.C. Data1- 9 10 data1+ gnd 11 12 n.C. N.C. 13 14 vcc gnd 15 16 hot plug detect data0- 17 18 data0+ gnd 19 20 n.C. N.C. 21 22 gnd clk+ 23 24 clk- cn5: com1 / com2 pin #...

  • Page 22

    Installations 18 mi805 user’s manual cn7: gigabit lan cn8: gigabit lan / usb 2.0 connector cn9: audio connector.

  • Page 23

    Installations mi805 user’s manual 19 j2, j3: lvds connectors, hirose df20g-20dp-1v j3: first channel lvds; j2: second channel lvds signal name pin # pin # signal name tx0n 2 1 tx0p ground 4 3 ground tx1n 6 5 tx1p ground 8 7 ground tx2n 10 9 tx2p ground 12 11 ground clkn 14 13 clkp ground 16 15 groun...

  • Page 24

    Installations 20 mi805 user’s manual j4, j5: sata hdd power connectors pin # signal name 1 +5v 2 ground 3 ground 4 +12v j7: dc_in connector pin # signal name 1 gnd 2 gnd 3 +12v to +24v 4 +12v to +24v 4 1 1 3 2 4.

  • Page 25

    Installations mi805 user’s manual 21 j8 / j9: mini pcie slot (j8 msata only) j10: usb 2.0 pin header signal name pin # pin # signal name vcc 1 2 ground d0- 3 4 d1+ d0+ 5 6 d1- ground 7 8 vcc 1 7 2 8.

  • Page 26

    Installations 22 mi805 user’s manual j11: ddr3l so-dimm (ch-a) sockets j13: ddr3l so-dimm (ch-b) sockets j12: mcu jtag.

  • Page 27

    Installations mi805 user’s manual 23 j14: amplifier connector pin # signal name 1 outl+ 2 outl- 3 outr- 4 outr+ j15: front panel signal name pin # pin # signal name gnd 1 2 pwr_btn 3.3v 3 4 hdd active gnd 5 6 reset +5v 7 8 gnd 1 4 1 7 2 8.

  • Page 28

    Installations 24 mi805 user’s manual j16: audio connector (df11-12dp-2dsa) signal name pin # pin # signal name lineout_r 2 1 lineout_l ground 4 3 jd_front linein_r 6 5 linein_l ground 8 7 jd_linein mic-r 10 9 mic_l ground 12 11 jd_mic1 #j16 & cn9 ether one (only one output) 1 11 2 12.

  • Page 29

    Installations mi805 user’s manual 25 j17: digital i/o [ signal name pin # pin # signal name gnd 1 2 vcc out3 3 4 out1 out2 5 6 out0 in3 7 8 in1 in2 9 10 in0 j18, j19, j20, j21: com6/com5/com4/com3 signal name pin # pin # signal name dcd, data carrier detect 1 2 rxd, receive data txd, transmit data 3...

  • Page 30

    Installations 26 mi805 user’s manual jp1: lcd backlight connector pin # signal name 1 +12v 2 backlight enable 3 brightness control 4 ground jp3: for spi debug tools pin header 1 4.

  • Page 31

    Installations mi805 user’s manual 27 jp9: debug port cpu_fan1: cpu fan power connector pin # signal name 1 ground 2 +12v 3 rotation detection 4 control 4 1.

  • Page 32

    Installations 28 mi805 user’s manual sys_fan1: system fan1 power connector pin # signal name 1 ground 2 +12v 3 rotation detection 4 control pcie1: pci express_x1 slot 4 1.

  • Page 33: Bios Setup

    Bios setup mi805 user’s manual 29 bios setup this chapter describes the different settings available in the ami bios that comes with the board. The topics covered in this chapter are as follows: bios introduction ..........................................................................................

  • Page 34

    Bios setup 30 mi805 user’s manual bios introduction the bios (basic input/output system) installed in your computer system’s rom supports intel processors. The bios provides critical low-level support for a standard device such as disk drives, serial ports and parallel ports. It also password protec...

  • Page 35

    Bios setup mi805 user’s manual 31 warning: it is strongly recommended that you avoid making any changes to the chipset defaults. These defaults have been carefully chosen by both ami and your system manufacturer to provide the absolute maximum performance and reliability. Changing the defaults could...

  • Page 36

    Bios setup 32 mi805 user’s manual advanced settings this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio setup utility main advanced chipset boot security save & exit → ← select screen ↑↓ select item enter: sel...

  • Page 37

    Bios setup mi805 user’s manual 33 lvds configuration aptio setup utility – copyright © 2013 american megatrends, inc. Main advanced chipset boot security save & exit configuration → ← select screen ↑↓ select item enter: select +- change opt. F1: general help f2: previous values f3: optimized default...

  • Page 38

    Bios setup 34 mi805 user’s manual super io configuration aptio setup utility – copyright © 2013 american megatrends, inc. Main advanced chipset boot security save & exit super io configuration → ← select screen ↑↓ select item enter: select +- change opt. F1: general help f2: previous values f3: opti...

  • Page 39

    Bios setup mi805 user’s manual 35 h/w monitor aptio setup utility – copyright © 2013 american megatrends, inc. Main advanced chipset boot security save & exit pc health status → ← select screen ↑↓ select item enter: select +- change opt. F1: general help f2: previous values f3: optimized defaults f4...

  • Page 40

    Bios setup 36 mi805 user’s manual cpu configuration this section shows the cpu configuration parameters. Aptio setup utility – copyright © 2013 american megatrends, inc. Main advanced chipset boot security save & exit cpu configuration ► socket 0 cpu information → ← select screen ↑↓ select item ente...

  • Page 41

    Bios setup mi805 user’s manual 37 cpu ppm configuration aptio setup utility – copyright © 2013 american megatrends, inc. Main advanced chipset boot security save & exit cpu ppm configuration → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previous values f3: optim...

  • Page 42

    Bios setup 38 mi805 user’s manual ide configuration sata devices configuration. Aptio setup utility – copyright © 2013 american megatrends, inc. Main advanced chipset boot security save & exit ide configuration → ← select screen ↑↓ select item enter: select +- change field f1: general help f2: previ...

  • Page 43

    Bios setup mi805 user’s manual 39 chipset settings aptio setup utility – copyright © 2013 american megatrends, inc. Main advanced chipset boot security save & exit → ← select screen ↑↓ select item enter: select +- change opt. F1: general help f2: previous values f3: optimized defaults f4: save & exi...

  • Page 44

    Bios setup 40 mi805 user’s manual security settings this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio setup utility – copyright © 2013 american megatrends, inc. Main advanced chipset boot security save & exi...

  • Page 45

    Bios setup mi805 user’s manual 41 boot settings this section allows you to configure the boot settings. Aptio setup utility – copyright © 2013 american megatrends, inc. Main advanced chipset boot security save & exit boot configuration → ← select screen ↑↓ select item enter: select +- change opt. F1...

  • Page 46

    Bios setup 42 mi805 user’s manual save & exit settings aptio setup utility – copyright © 2013 american megatrends, inc. Main advanced chipset boot security save & exit save changes and exit → ← select screen ↑↓ select item enter: select +- change opt. F1: general help f2: previous values f3: optimiz...

  • Page 47: Drivers Installation

    Drivers installation mi805 user’s manual 43 drivers installation this section describes the installation procedures for software and drivers. The software and drivers are included with the motherboard. If you find the items missing, please contact the vendor where you made the purchase. The contents...

  • Page 48

    Drivers installation 44 mi805 user’s manual intel chipset software installation utility the intel chipset drivers should be installed first before the software drivers to enable plug & play inf support for intel chipset components. Follow the instructions below to complete the installation. 1. Inser...

  • Page 49

    Drivers installation mi805 user’s manual 45 vga drivers installation 1. Insert the dvd that comes with the board. Click intel and then intel(r) baytrail chipset . Click intel(r) baytrail graphics driver. 2. When the welcome screen appears, click next to continue. 3. Click yes to accept the license a...

  • Page 50

    Drivers installation 46 mi805 user’s manual realtek high definition audio driver installation 1. Insert the dvd that comes with the board. Click intel and then intel(r) baytrail chipset . Click realtek high definition audio driver. 2. On the welcome screen, click next to proceed with the installatio...

  • Page 51

    Drivers installation mi805 user’s manual 47 intel trusted execution engine installation 1. Insert the dvd that comes with the board. Click intel and then intel(r) baytrail chipset . Click intel(r) txe driver. 2. On the setup welcome screen, click next to proceed with the installation process. 3. Cli...

  • Page 52

    Drivers installation 48 mi805 user’s manual lan drivers installation 1. Insert the dvd that comes with the board. Click intel and then intel(r) baytrail chipset . Click intel(r) lan drivers . 2. Click intel(r) i21x giga network driver. 3. Click install drivers and software..

  • Page 53

    Drivers installation mi805 user’s manual 49 4. When the welcome screen appears, click next . 5. Click next to to agree with the license agreement. 6. Click the checkbox for drivers in the setup options screen to select it and click next to continue. 7. The wizard is ready to begin installation. Clic...

  • Page 54

    Drivers installation 50 mi805 user’s manual this page is intentionally left blank..

  • Page 55: Appendix

    Appendix mi805 user’s manual 51 appendix a. I/o port address map each peripheral device in the system is assigned a set of i/o port addresses that also becomes the identity of the device. The following table lists the i/o port addresses used. Address device description 070h – 07fh real time clock 2e...

  • Page 56

    Appendix 52 mi805 user’s manual b. Interrupt request lines (irq) peripheral devices use interrupt request lines to notify cpu for the service required. The following table shows the irq used by the devices on board. Level function irq0 system timer irq3 serial port #2 irq4 serial port #1 irq6 serial...

  • Page 57

    Appendix mi805 user’s manual 53 c. Watchdog timer configuration the wdt is used to generate a variety of output signals after a user programmable count. The wdt is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock. Under these sorts of circumst...

  • Page 58

    Appendix 54 mi805 user’s manual return 0; } //--------------------------------------------------------------------------- void enablewdt(int interval) { unsigned char bbuf; set_6106_ld(0x08); set_6106_reg(0x30, 0x01); set_6106_reg(0xf1, interval); } //------------------------------------------------...

  • Page 59

    Appendix mi805 user’s manual 55 //--------------------------------------------------------------------------- // // this code and information is provided "as is" without warranty of any // kind, either expressed or implied, including but not limited to the // implied warranties of merchantability an...

  • Page 60

    Appendix 56 mi805 user’s manual { unsigned char result; unlock_6106(); outportb(6106_index_port, reg); result = inportb(6106_data_port); lock_6106(); return result; } //------------------------------------------------------------------------------------ this page is intentionally left blank..