1. DL manuals
  2. IBASE Technology
  3. Motherboard
  4. MI930
  5. User Manual

IBASE Technology MI930 User Manual

Manual is about: AMD Athlon 64 / Athlon 64 x2 (Dual Core) / Sempron Mini-ITX Motherboard

Summary of MI930

  • Page 1

    Mi930/mi930f amd athlon™ 64 / athlon™ 64 x2 (dual core) / sempron™ mini-itx motherboard user’s manual version 1.0a.

  • Page 2: Acknowledgments

    Ii mi930 user’s manual acknowledgments award is a registered trademark of award software international, inc. Ps/2 is a trademark of international business machines corporation. Amd athlon™ 64 / athlon™ 64 x2 (dual core) / sempron™ processors are registered trademarks of amd corporation. Microsoft wi...

  • Page 3: Introduction

    Mi930 user’s manual iii table of contents introduction ....................................................... 1 product description ............................................................. 1 checklist .............................................................................. 2 mi930 specif...

  • Page 4

    Iv mi930 user’s manual this page is intentionally left blank..

  • Page 5: Introduction

    Introduction mi930 user’s manual 1 introduction product description the mi930 mini itx board incorporates the mobile amd m690t express chipset for embedded computing, consisting of the amd m690t (north bridge) and sb600 (south bridge), an optimized integrated graphics solution with an 800mhz front-s...

  • Page 6: Checklist

    Introduction 2 mi930 user’s manual checklist your mi930 package should include the items listed below. •the mi930 mini-itx motherboard •this user’s manual •1 cd containing chipset drivers and flash memory utility •cable kit (ide, serial port, serial ata).

  • Page 7: Mi930 Specifications

    Introduction mi930 user’s manual 3 mi930 specifications cpu supported amd athlon™ 64 / athlon™ 64 x2 (dual core) / sempron™ 64-bit processor integrated w/ ddrii memory controller in cpu. Cpu voltage 0.700v ~ 1.5v system speed up to 2.8ghz or above cpu fsb 800mhz fsb cache 128k/256k/512k1mb/2mb green...

  • Page 8: Board Dimensions

    Introduction [ board dimensions 4 mi930 user’s manual.

  • Page 9: Installations

    Installations mi930 user’s manual 5 installations this section provides information on how to use the jumpers and connectors on the mi930 in order to set up a workable system. The topics covered are: installing the cpu ........................................................................ 6 instal...

  • Page 10: Installing The Cpu

    Installations installing the cpu the mi930 board supports a socket am2 (940-pin) processor socket for amd athlon ™ 64 / athlon ™ 64 x2 (dual core) / sempron ™ processors. To install the cpu, unlock first the socket by pressing the lever sideways, then lift it up to a 90 degree angle as shown below. ...

  • Page 11: Installing The Memory

    Installations installing the memory the mi930 board supports two ddr2 memory socket for a maximum total memory of 4gb in ddr2 memory type. Installing and removing memory modules to install the ddr2 modules, locate the memory slot on the board and perform the following steps: 1. Hold the ddr2 module ...

  • Page 12: Setting The Jumpers

    Installations 8 mi930 user’s manual setting the jumpers jumpers are used on mi930 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on mi930 and th...

  • Page 13

    Installations jumper locations on mi930 jumpers on mi930 ............................................................................ Page jp1: lcd panel power selection ................................................. 10 jp2: pci riser card selection ..................................................

  • Page 14

    Installations jbat1: clear cmos setting jbat1 setting normal clear cmos jp1: lcd panel power selection jp1 lcd panel power 3.3v 5v jp2: pci riser card selection jp2 riser card ip390 riser card install ip151, ip240 riser card install 10 mi930 user’s manual.

  • Page 15

    Installations jp3, jp4, jp5: rs232/422/485 (com2) selection com1 is fixed for rs-232 use only. Com2 is selectable for rs232, rs-422 and rs-485. The following table describes the jumper settings for com2 selection. Com2 function rs-232 rs-422 rs-485 jumper setting (pin closed) jp5: 1-2 jp4: 3-5 & 4-6...

  • Page 16: Connectors On Mi930

    Installations 12 mi930 user’s manual connectors on mi930 connector locations on mi930 ........................................................... 13 cn1: audio connector ........................................................................ 14 cn2: ps/2 keyboard and ps/2 mouse connectors ............

  • Page 17

    Installations connector locations on mi930 connector locations on mi930 cn1: audio connector ............................................................................................................................. 14 cn2: ps/2 keyboard and ps/2 mouse connectors ....................................

  • Page 18

    Installations cn1: audio connector cn2: ps/2 keyboard and ps/2 mouse connectors ps/2 mouse ps/2 keyboard signal name keyboard mouse signal name keyboard data 1 1 mouse data n.C. 2 2 n.C. Gnd 3 3 gnd 5v 4 4 5v keyboard clock 5 5 mouse clock n.C. 6 6 n.C. Cn3: com1 and dvi-i connector [ signal name pi...

  • Page 19

    Installations signal name pin # pin # signal name data 2- 1 16 hot power data 2+ 2 17 data 0- shield 2/4 3 18 data 0+ data 4- 4 19 shield 0/5 data 4+ 5 20 data 5- ddc clock 6 21 data 5+ ddc data 7 22 shield clk vsync 8 23 clock - data 1- 9 24 clock + data 1+ 10 c1 n.C. Shield 1/3 11 c2 n.C. Data 3- ...

  • Page 20

    Installations atx2: atx power supply connector 11 1 20 10 signal name pin # pin # signal name 3.3v 11 1 3.3v -12v 12 2 3.3v ground 13 3 ground ps-on 14 4 +5v ground 15 5 ground ground 16 6 +5v ground 17 7 ground -5v 18 8 power good +5v 19 9 5vsb +5v 20 10 +12v fan1: system fan power connector fan1 i...

  • Page 21

    Installations ide1: ide connector signal name pin # pin # signal name reset ide 1 2 ground host data 7 3 4 host data 8 host data 6 5 6 host data 9 host data 5 7 8 host data 10 host data 4 9 10 host data 11 host data 3 11 12 host data 12 host data 2 13 14 host data 13 host data 1 15 16 host data 14 h...

  • Page 22

    Installations lvds1, lvds2: lvds connectors (1st channel, 2nd channel) signal name pin # pin # signal name tx0- 2 1 tx0+ ground 4 3 ground tx1- 6 5 tx1+ 5v/3.3v 8 7 ground na 10 9 na tx2- 12 11 tx2+ ground 14 13 ground txc- 16 15 txc+ 5v/3.3v 18 17 enabkl +12v 20 19 +12v j2: audio pin header for cha...

  • Page 23

    Installations mi930 user’s manual 19 j7 (f_panel): system function connector atx power on switch: pins 1 and 2 this 2-pin connector is an “atx power supply on/off switch” on the system that connects to the power switch on the case. When pressed, the power switch will force the system to power on. Wh...

  • Page 24

    Installations j9: digital i/o signal name pin pin signal name gnd 1 2 vcc out3 3 4 out1 out2 5 6 out0 in3 7 8 in1 in2 9 10 in0 pci1: pci slot (supports 2 master) id395 winbond wpct200 for tpm1.2 cn1: lpc i/f connectors package list nylon nut x 1 screw x 2 washer x2 20 mi930 user’s manual.

  • Page 25

    Installations id394 lpc serial ports adaptor card j1 j2: com3/4/5/6 serial ports j1 - com3/4 pin-header connector. Pin1~pin10 com3 pin11~pin20 com4 j2 - com5/6 pin-header connector. Pin1~pin10 com5 pin11~pin20 com6 signal name pin # pin # signal name dcd, data carrier detect 1 2 dsr, data set ready ...

  • Page 26

    Installations 22 mi930 user’s manual this page is intentionally left blank..

  • Page 27: Bios Setup

    Bios setup mi930 user’s manual 23 bios setup this chapter describes the different settings available in the award bios that comes with the board. The topics covered in this chapter are as follows: bios introduction ........................................................................ 24 bios setu...

  • Page 28

    Bios setup 24 mi930 user’s manual bios introduction the award bios (basic input/output system) installed in your computer system’s rom supports various processors. The bios provides critical low-level support for a standard device such as disk drives, serial ports and parallel ports. It also adds vi...

  • Page 29

    Bios setup mi930 user’s manual 25 phoenix - awardbios cmos setup utility standard cmos features frequency/voltage control advanced bios features load fail-safe defaults advanced chipset features load optimized defaults integrated peripherals set supervisor password power management setup set user pa...

  • Page 30

    Bios setup 26 mi930 user’s manual standard cmos setup “standard cmos setup” choice allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the motherboard is already installed in a working system, you will not need to select thi...

  • Page 31

    Bios setup mi930 user’s manual 27 to set the date, highlight the “date” field and use the pageup/ pagedown or +/- keys to set the current time. Time the time format is: hour : 00 to 23 minute : 00 to 59 second : 00 to 59 to set the time, highlight the “time” field and use the / or +/- keys to set th...

  • Page 32

    Bios setup 28 mi930 user’s manual advanced bios features this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Phoenix - awardbios cmos setup utility advanced bios features cpu feature press enter item help hard disk ...

  • Page 33

    Bios setup mi930 user’s manual 29 quick power on self test when enabled, this field speeds up the power on self test (post) after the system is turned on. If it is set to enabled, bios will skip some items. First/second/third boot device these fields determine the drive that the system searches firs...

  • Page 34

    Bios setup 30 mi930 user’s manual security option this field allows you to limit access to the system and setup. The default value is setup. When you select system, the system prompts for the user password every time you boot up. When you select setup, the system always boots up and prompts for the ...

  • Page 35

    Bios setup mi930 user’s manual 31 advanced chipset features this setup menu controls the configuration of the chipset. Phoenix - awardbios cmos setup utility advanced chipset features dram configuration press enter item help ht link control press enter pcie configuration press enter igx configuratio...

  • Page 36

    Bios setup 32 mi930 user’s manual phoenix - awardbios cmos setup utility debug options gfx core payload size 64 bytes item help gpp core payload size 64 bytes sb/gpp port cfg auto gfx clock gating enabled gppsb clock gating enabled tmds support on nb-sb virtual channel disabled port reset deassert d...

  • Page 37

    Bios setup mi930 user’s manual 33 integrated peripherals this section sets configurations for your hard disk and other integrated peripherals. The first screen shows three main items for user to select. Once an item selected, a submenu appears. Details follow. Phoenix - awardbios cmos setup utility ...

  • Page 38

    Bios setup 34 mi930 user’s manual phoenix - awardbios cmos setup utility superio device power on function button only item help kb power on password enter hot key power on ctrl-f1 onboard fdc controller disabled onboard serial port 1 3f8/irq4 onboard serial port 2 2f8/irq3 uart mode select normal rx...

  • Page 39

    Bios setup mi930 user’s manual 35 power management setup phoenix - awardbios cmos setup utility power management setup acpi suspend type s1(pos) item help c2 disable/enable disabled power management option user define menu level > hdd power down disabled video off option suspend Æoff video off metho...

  • Page 40

    Bios setup 36 mi930 user’s manual soft-off by pwrbtn this field defines the power-off mode when using an atx power supply. The instant off mode allows powering off immediately upon pressing the power button. In the delay 4 sec mode, the system powers off when the power button is pressed for more tha...

  • Page 41

    Bios setup mi930 user’s manual 37 pnp/pci configurations this option configures the pci bus system. All pci bus systems on the system use int#, thus all installed pci cards must be set to this value. Phoenix - awardbios cmos setup utility pnp/pci configurations reset configuration data disabled item...

  • Page 42

    Bios setup 38 mi930 user’s manual pc health status this section shows the parameters in determining the pc health status. These parameters include temperatures, fan speeds and voltages. Phoenix - awardbios cmos setup utility pc health status cpu warning temperature disabled item help system temp 45°...

  • Page 43

    Bios setup mi930 user’s manual 39 frequency/voltage control this section shows the user how to configure the processor frequency. Phoenix - awardbios cmos setup utility frequency/voltage control spread spectrum disabled item help cpu host/srtc/atig default menu level > auto detect pci clk this field...

  • Page 44

    Bios setup 40 mi930 user’s manual load fail-safe defaults this option allows you to load the troubleshooting default values permanently stored in the bios rom. These default settings are non-optimal and disable all high-performance features. Load optimized defaults this option allows you to load the...

  • Page 45: Drivers Installation

    Drivers installation mi930 user’s manual 41 drivers installation this section describes the installation procedures for software and drivers under the windows 2000 and windows xp. The software and drivers are included with the motherboard. If you find the items missing, please contact the vendor whe...

  • Page 46

    Driver installation sm bus controller driver installation 1. In your windows operating system, go to the device manager. 2. Double click sm bus controller which is under other devices as shown in the picture below to go to the sm bus controller properties window. 42 mi930 user’s manual.

  • Page 47

    Drivers installation 3. Under the sm bus controller properties window, click the driver tab and click update driver. 4. When the welcome screen of the hardware update wizard appears, click no, not this time, and next to continue. Mi930 user’s manual 43.

  • Page 48

    Driver installation 5. On the next screen, select install from a list or specific location (advanced), and click next to continue. 6. Select search for the best driver in these locations., and enter the path where the drivers are located. If e:\ is your cd rom drive, enter e:\ali\amd690t\smbus or cl...

  • Page 49: Vga Drivers Installation

    Drivers installation vga drivers installation to install the vga drivers, follow the steps below to proceed with the installation. 1. Insert the cd that comes with the motherboard. Click amd m690t chipset drivers. 2. Click ati radeon x1200 serial graphics drivers as shown below. Remarks: before inst...

  • Page 50

    Driver installation 3. In the welcome screen, click next to continue. Then, in the license agreement screen, also click next to continue. 4. When the select components screen appears, click express: recommended, in selecting the component thatbyou want to install. 5. When the message regarding windo...

  • Page 51

    Drivers installation realtek codec audio driver installation follow the steps below to install the audio drivers. 1. Insert the cd that comes with the motherboard. Click amd m690t chipset drivers. Then, select realtek high definition codect audio driver. 2. Click realtek ac'97 codec audio driver. Mi...

  • Page 52

    Driver installation 3. In the welcome screen, click next to continue. After the driver installation, click finish on the next screen to restart the computer. 4. In the windows operating system, go the the device manager window and click on pci device with the interjection mark as shown below. 5. One...

  • Page 53

    Drivers installation 6. In the hardware update wizard, select no, not this time, and click next. 7. In the next screen, the wizard will help you install software for ‘pci device’. Select install from a list or specific location (advanced) and , and click next to continue. In the next screen (below),...

  • Page 54: Lan Drivers Installation

    Driver installation lan drivers installation 1. Insert the cd that comes with the motherboard. Click lan card on the left side and click marvell lan controller driver. 2. When the welcome screen of the marvell mini port driver – installshield wizard appears, click next to continue. Then, in the next...

  • Page 55: Appendix

    Appendix mi930 user’s manual 51 appendix a. I/o port address map each peripheral device in the system is assigned a set of i/o port addresses which also becomes the identity of the device. The following table lists the i/o port addresses used. Address device description 000h - 01fh dma controller #1...

  • Page 56

    Appendix 52 mi930 user’s manual b. Interrupt request lines (irq) peripheral devices use interrupt request lines to notify cpu for the service required. The following table shows the irq used by the devices on board. Level function irq0 system timer output irq1 keyboard irq2 interrupt cascade irq3 se...

  • Page 57

    Appendix mi930 user’s manual 53 c. Watchdog timer configuration the wdt is used to generate a variety of output signals after a user programmable count. The wdt is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock. Under these sorts of circumst...

  • Page 58

    Appendix 54 mi930 user’s manual void copyright(void) { printf("======== winbond 83627ehf watch timer tester (auto detect) ========"\ " usage : w627e_wd reset_time"\ " ex : w627e_wd 3 => reset system after 3 second"\ " w627e_wd 0 => disable watch dog timer"); } //===========================...

  • Page 59

    Appendix mi930 user’s manual 55 //=========================================================================== // // this code and information is provided "as is" without warranty of any // kind, either expressed or implied, including but not limited to the // implied warranties of merchantability an...

  • Page 60

    Appendix 56 mi930 user’s manual //=========================================================================== void set_w627ehf_reg( unsigned char reg, unsigned char data) { unlock_w627ehf(); outportb(w627ehf_index_port, reg); outportb(w627ehf_data_port, data); lock_w627ehf(); } //===================...