1. DL manuals
  2. IBASE Technology
  3. Motherboard
  4. MI933
  5. User manual

IBASE Technology MI933 User manual

Manual is about: AMD Sempron 200U /210U (Single Core) / Sempron Mini-ITX Motherboard

Summary of MI933

  • Page 1

    Mi933 amd sempron™ 200u /210u (single core) / sempron™ mini-itx motherboard user’s manual version 1.0

  • Page 2: Acknowledgments

    Ii mi933 user’s manual acknowledgments award is a registered trademark of award software international, inc. Ps/2 is a trademark of international business machines corporation. Amd sempron™ 200u /210u (single core) / sempron™ processors are registered trademarks of amd corporation. Microsoft windows...

  • Page 3: Introduction

    Mi933 user’s manual iii table of contents introduction ....................................................... 1 product description ............................................................. 1 checklist .............................................................................. 2 mi933 specif...

  • Page 4

    Iv mi933 user’s manual this page is intentionally left blank..

  • Page 5: Introduction

    Introduction mi933 user’s manual 1 introduction product description the mi933 mini itx board incorporates the amd m690e express chipset for embedded computing, consisting of the amd m690e (north bridge) and sb600 (south bridge), an optimized integrated graphics solution with an 800mhz front-side bus...

  • Page 6: Checklist

    Introduction 2 mi933 user’s manual checklist your mi933 package should include the items listed below. •the mi933 mini-itx motherboard •this user’s manual •1 cd containing chipset drivers and flash memory utility •cable kit (ide, serial port, serial ata).

  • Page 7: Mi933 Specifications

    Introduction mi933 user’s manual 3 mi933 specifications cpu type onboard amd sempron™ 200u (1.0ghz) or 210u (1.5ghz) 64-bit processor with integrated ddrii memory controller chipset amd m690e / sb600 chipset nb: m690e, 465-ball fcbga (21x21mm) sb: amd sb600, 549-ball fcbga (23x23mm, 0.8mm pitch) bio...

  • Page 8: Board Dimensions

    Introduction [ board dimensions 4 mi933 user’s manual.

  • Page 9: Installations

    Installations mi933 user’s manual 5 installations this section provides information on how to use the jumpers and connectors on the mi933 in order to set up a workable system. The topics covered are: installing the memory ........................................................................... 6 ...

  • Page 10: Installing The Memory

    Installations installing the memory the mi933 board supports one ddr2 memory socket for a maximum total memory of 2gb in ddr2 memory type. Installing and removing memory modules to install the ddr2 modules, locate the memory slot on the board and perform the following steps: 1. Hold the ddr2 module ...

  • Page 11: Setting The Jumpers

    Installations mi933 user’s manual 7 setting the jumpers jumpers are used on mi933 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on mi933 and th...

  • Page 12

    Installations jumper locations on mi933 jumpers on mi933 ........................................................................... Page jbat1: clear cmos setting................................................................. 9 jp2: pci riser card selection ..........................................

  • Page 13

    Installations jbat1: clear cmos setting jbat1 setting normal clear cmos jp2: pci riser card selection jp2 riser card ip390 riser card installed (default) ip151, ip240 riser card installed remarks: ip390, ip151 and ip240 are optional riser cards. Mi933 user’s manual 9.

  • Page 14

    Installations jp3, jp4, jp5: rs232/422/485 (com2) selection com1 is fixed for rs-232 use only. Com2 is selectable for rs232, rs-422 and rs-485. The following table describes the jumper settings for com2 selection. Com2 function rs-232 rs-422 rs-485 jumper setting (pin closed) jp5: 1-2 jp4: 3-5 & 4-6...

  • Page 15: Connectors On Mi933

    Installations mi933 user’s manual 11 connectors on mi933 connector locations on mi933 ........................................................... 12 cn1: audio connector ........................................................................ 13 cn2: ps/2 keyboard and ps/2 mouse connectors ............

  • Page 16

    Installations connector locations on mi933 connector locations on mi933 .......................................................................................................... Page cn1: audio connector ..................................................................................................

  • Page 17

    Installations cn1: audio connector cn2: ps/2 keyboard and ps/2 mouse connectors ps/2 mouse ps/2 keyboard signal name keyboard mouse signal name keyboard data 1 1 mouse data n.C. 2 2 n.C. Gnd 3 3 gnd 5v 4 4 5v keyboard clock 5 5 mouse clock n.C. 6 6 n.C. Cn3: dvi-d and dvi-i connector [ signal name p...

  • Page 18

    Installations signal name pin # pin # signal name data 2- 1 16 hot power data 2+ 2 17 data 0- shield 2/4 3 18 data 0+ data 4- 4 19 shield 0/5 data 4+ 5 20 data 5- ddc clock 6 21 data 5+ ddc data 7 22 shield clk vsync 8 23 clock - data 1- 9 24 clock + data 1+ 10 c1 a red shield 1/3 11 c2 a green data...

  • Page 19

    Installations fan2: cpu fan power connector fan2 is a 3-pin header for the cpu fan. The fan must be a 12v fan. Pin # signal name 1 ground 2 +12v 3 rotation detection f_usb1, f_usb2: usb0/usb1/usb2/usb3 connector signal name pin pin signal name vcc 1 2 vcc d0- 3 4 d1- d0+ 5 6 d1+ ground 7 8 ground nc...

  • Page 20

    Installations sata1, sata2: sata connectors com1: com1 serial port [ signal name pin # pin # signal name dcd 1 6 dsr rxd 2 7 rts txd 3 8 cts dtr 4 9 ri gnd 5 10 not used com2: com2 serial port pin # signal name rs-232 r2-422 rs-485 1 dcd tx- data- 2 rx tx+ data+ 3 tx rx+ nc 4 dtr rx- nc 5 ground gro...

  • Page 21

    Installations j6: power led connector pin # signal name 1 led+ 2 no connect 3 ground mi933 user’s manual 17 j7 (f_panel): system function connector atx power on switch: pins 1 and 2 this 2-pin connector is an “atx power supply on/off switch” on the system that connects to the power switch on the cas...

  • Page 22

    Installations j9: digital i/o signal name pin pin signal name gnd 1 2 vcc out3 3 4 out1 out2 5 6 out0 in3 7 8 in1 in2 9 10 in0 j10: internal dc-in power connector pin # signal name 1 ground 2 ground 3 +12v or 19v 4 +12v or 19v j11: hdd power connector pin # signal name 1 +12v 2 ground 3 ground 4 5v ...

  • Page 23

    Installations id395 winbond wpct200 for tpm1.2 cn1: lpc i/f connectors t x 1 package list nylon nu screw x 2 washer x2 mi933 user’s manual 19.

  • Page 24

    Installations id394 lpc serial ports adaptor card j1 j2: com3/4/5/6 serial ports j1 - com3/4 pin-header connector. Pin1~pin10 com3 pin11~pin20 com4 j2 - com5/6 pin-header connector. Pin1~pin10 com5 pin11~pin20 com6 signal name pin # pin # signal name dcd, data carrier detect 1 2 dsr, data set ready ...

  • Page 25: Bios Setup

    Bios setup mi933 user’s manual 21 bios setup this chapter describes the different settings available in the award bios that comes with the board. The topics covered in this chapter are as follows: bios introduction ........................................................................ 22 bios setu...

  • Page 26

    Bios setup 22 mi933 user’s manual bios introduction the award bios (basic input/output system) installed in your computer system’s rom supports various processors. The bios provides critical low-level support for a standard device such as disk drives, serial ports and parallel ports. It also adds vi...

  • Page 27

    Bios setup mi933 user’s manual 23 phoenix - awardbios cmos setup utility standard cmos features frequency/voltage control advanced bios features load fail-safe defaults advanced chipset features load optimized defaults integrated peripherals set supervisor password power management setup set user pa...

  • Page 28

    Bios setup 24 mi933 user’s manual standard cmos setup “standard cmos setup” choice allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the motherboard is already installed in a working system, you will not need to select thi...

  • Page 29

    Bios setup mi933 user’s manual 25 time the time format is: hour : 00 to 23 minute : 00 to 59 second : 00 to 59 to set the time, highlight the “time” field and use the / or +/- keys to set the current time. Ide channel master/slave the onboard pci ide connector provides primary and secondary channels...

  • Page 30

    Bios setup 26 mi933 user’s manual advanced bios features this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Phoenix - awardbios cmos setup utility advanced bios features cpu feature press enter item help hard disk ...

  • Page 31

    Bios setup mi933 user’s manual 27 quick power on self test when enabled, this field speeds up the power on self test (post) after the system is turned on. If it is set to enabled, bios will skip some items. First/second/third boot device these fields determine the drive that the system searches firs...

  • Page 32

    Bios setup 28 mi933 user’s manual security option this field allows you to limit access to the system and setup. The default value is setup. When you select system, the system prompts for the user password every time you boot up. When you select setup, the system always boots up and prompts for the ...

  • Page 33

    Bios setup mi933 user’s manual 29 advanced chipset features this setup menu controls the configuration of the chipset. Phoenix - awardbios cmos setup utility advanced chipset features dram configuration press enter item help ht link control press enter pcie configuration press enter igx configuratio...

  • Page 34

    Bios setup 30 mi933 user’s manual phoenix - awardbios cmos setup utility debug options gfx core payload size 64 bytes item help gpp core payload size 64 bytes sb/gpp port cfg auto gfx clock gating enabled gppsb clock gating enabled tmds support on nb-sb virtual channel disabled port reset deassert d...

  • Page 35

    Bios setup mi933 user’s manual 31 integrated peripherals this section sets configurations integrated peripherals, ide devices, pci devices and super io devices. Phoenix - awardbios cmos setup utility integrated peripherals onboard device press enter item help south onchip ide device press enter menu...

  • Page 36

    Bios setup 32 mi933 user’s manual power on function button only item help kb power on password enter hot key power on ctrl-f1 onboard fdc controller disabled onboard serial port 1 3f8/irq4 onboard serial port 2 pwron after pwr fail 2f8/irq3 off power on function this field sets the display to be ini...

  • Page 37

    Bios setup mi933 user’s manual 33 power management setup phoenix - awardbios cmos setup utility power management setup acpi function enabled item help acpi suspend type s3(str) menu level > c2 disable/enable disabled power management option user define hdd power down disabled video off option suspen...

  • Page 38

    Bios setup 34 mi933 user’s manual modem use irq this field sets the irq used by the modem. By default, the setting is 3. Soft-off by pwrbtn this field defines the power-off mode when using an atx power supply. The instant off mode allows powering off immediately upon pressing the power button. In th...

  • Page 39

    Bios setup mi933 user’s manual 35 pnp/pci configurations this option configures the pci bus system. All pci bus systems on the system use int#, thus all installed pci cards must be set to this value. Phoenix - awardbios cmos setup utility pnp/pci configurations reset configuration data disabled item...

  • Page 40

    Bios setup 36 mi933 user’s manual pc health status this section shows the parameters in determining the pc health status. These parameters include temperatures, fan speeds and voltages. Phoenix - awardbios cmos setup utility pc health status cpu warning temperature disabled item help current system ...

  • Page 41

    Bios setup mi933 user’s manual 37 frequency/voltage control this section shows the user how to configure the processor frequency. Phoenix - awardbios cmos setup utility frequency/voltage control spread spectrum disabled item help cpu host/srtc/atig default menu level > spread spectrum this field set...

  • Page 42

    Bios setup 38 mi933 user’s manual load fail-safe defaults this option allows you to load the troubleshooting default values permanently stored in the bios rom. These default settings are non-optimal and disable all high-performance features. Load optimized defaults this option allows you to load the...

  • Page 43: Drivers Installation

    Drivers installation mi933 user’s manual 39 drivers installation this section describes the installation procedures for software and drivers under the windows 2000 and windows xp. The software and drivers are included with the motherboard. If you find the items missing, please contact the vendor whe...

  • Page 44

    Drivers installation sm bus controller driver installation 1. In your windows operating system, go to the device manager. 2. Double click sm bus controller which is under other devices as shown in the picture below to go to the sm bus controller properties window. 40 mi933 user’s manual.

  • Page 45

    Drivers installation 3. Under the sm bus controller properties window, click the driver tab and click update driver. 4. When the welcome screen of the hardware update wizard appears, click no, not this time, and next to continue. Mi933 user’s manual 41.

  • Page 46

    Drivers installation 5. On the next screen, select install from a list or specific location (advanced), and click next to continue. 6. Select search for the best driver in these locations., and enter the path where the drivers are located. If e:\ is your cd rom drive, enter e:\ali\amd690t\smbus or c...

  • Page 47: Vga Drivers Installation

    Drivers installation vga drivers installation to install the vga drivers, follow the steps below to proceed with the installation. 1. Insert the cd that comes with the motherboard. Click amd m690e chipset drivers. 2. Click ati radeon x1200 serial graphics drivers as shown below. Remarks: before inst...

  • Page 48

    Drivers installation 3. In the welcome screen, click next to continue. Then, in the license agreement screen, also click next to continue. 4. When the select components screen appears, click express: recommended, in selecting the component that you want to install. 5. When the message regarding wind...

  • Page 49

    Drivers installation realtek codec audio driver installation follow the steps below to install the audio drivers. 1. Insert the cd that comes with the motherboard. Click amd m690e chipset drivers. Then, select realtek high definition codect audio driver. 2. Click realtek ac'97 codec audio driver. 3....

  • Page 50: Lan Drivers Installation

    Drivers installation lan drivers installation 1. Insert the cd that comes with the motherboard. Click lan card on the left side and click realtek gbe_fe ethernet pci-e nic driver. 2. When the welcome screen of the installshield wizard appears, click next to continue. 46 mi933 user’s manual.

  • Page 51

    Drivers installation 3. On the next screen, you are asked to click install to begin the installation process. Now, click install to proceed. 4. Installation is now complete, click finish to exit installshield wizard. Mi933 user’s manual 47.

  • Page 52: Appendix

    Appendix 48 mi933 user’s manual appendix a. I/o port address map each peripheral device in the system is assigned a set of i/o port addresses that also becomes the identity of the device. The following table lists the i/o port addresses used. Address device description 000h - 01fh dma controller #1 ...

  • Page 53

    Appendix mi933 user’s manual 49 b. Interrupt request lines (irq) peripheral devices use interrupt request lines to notify cpu for the service required. The following table shows the irq used by the devices on board. Level function irq0 system timer output irq1 keyboard irq2 interrupt cascade irq3 se...

  • Page 54

    Appendix 50 mi933 user’s manual c. Watchdog timer configuration the wdt is used to generate a variety of output signals after a user programmable count. The wdt is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock. Under these sorts of circumst...

  • Page 55

    Appendix mi933 user’s manual 51 void copyright(void) { printf("======== winbond 83627ehf watch timer tester (auto detect) ========"\ " usage : w627e_wd reset_time"\ " ex : w627e_wd 3 => reset system after 3 second"\ " w627e_wd 0 => disable watch dog timer"); } //===========================...

  • Page 56

    Appendix 52 mi933 user’s manual //=========================================================================== // // this code and information is provided "as is" without warranty of any // kind, either expressed or implied, including but not limited to the // implied warranties of merchantability an...

  • Page 57

    Appendix mi933 user’s manual 53 //=========================================================================== void set_w627ehf_reg( unsigned char reg, unsigned char data) { unlock_w627ehf(); outportb(w627ehf_index_port, reg); outportb(w627ehf_data_port, data); lock_w627ehf(); } //===================...

  • Page 58

    Appendix 54 mi933 user’s manual this page is intentionally left blank..