IBASE Technology SI-606 User Manual

Page of 82

Download

Print this page

Bookmark us

SI-606 User Manual

SI-606

User Manual

1 2 3 4 5 6 7 Next › »

Summary of SI-606

Page 1
Si-606 user manual si-606 user manual.
Page 2
Ii si-606 user manual revision release date v1.0 2015/10/20
Page 3
Copyright © 2013 ibase technology inc. All rights reserved. Iii ibase technology inc. Copyright © 2013 ibase technology inc. All rights reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or...
Page 4: Table Of Contents
Iv si-606 user manual table of contents setting up your system .......................................................................................................... V care during use ...................................................................................................................
Page 5
Copyright © 2013 ibase technology inc. All rights reserved. V ibase technology inc. Safety information your si-606 is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety in...
Page 6
Vi si-606 user manual care during use do not walk on the power cord or allow anything to rest on it. Do not spill water or any other liquids on your system. When the system is turned off, a small amount of electrical current still flows. Always unplug all power, and network cables from the power out...
Page 7
Copyright © 2013 ibase technology inc. All rights reserved. Vii ibase technology inc. Acknowledgments ami is a registered trademark of ami software international, inc. Amd and ati are registered trademarks of amd corporation. Microsoft windows is a registered trademark of microsoft corporation. Fint...
Page 9: Chapter 1 Introduction
1 si-606 user manual chapter 1 introduction 1.1 general description the “signature book™” si-606 is a professional digital signage system powered by 4 th gen. Intel ® core tm i desktop processors with amd radeon™ e8860 graphics. The si-606 integrates six (6) dp ports with independent video output an...
Page 10
2 si-606 user manual 1.2 system specifications 1.2.1 hardware specifications model name si-606 system mainboard mbd60e cpu 4th generation intel® core™ i7/i5/i3 and pentium® qc/dc processors; up to 3.5ghz memory 4x ddr3 1600 mhz, max. 32gb i/o interface 6x dp with independent video output 1x dvi-i fo...
Page 12
4 si-606 user manual 1.2.3 i/o view si-606 front side si-606 rear side.
Page 14
6 si-606 user manual 1.3.1 parts description part no. Description part no. Description 1 si-606_base 2 4028_fan 3 dp board module 4 power module 5 si-606 main board 6 si-606_hdd-tray 7 si-606_hdd-brk 8 screw f type m3*0.5 9 sata cable 10 2.5" sata hdd 11 m3 nut 12 m3 double screw bolt 13 si-606_top-...
Page 15
Copyright © 2013 ibase technology inc. All rights reserved. 7 ibase technology inc. 1.4 packing list item no. Description qty 1 driver cd 1 2 power adaptor 1 3 power cord 1 1.4.1 optional items module wifi solution description wifi module wireless; pci-e mini card 802.11b/g/n [aw-ne238h] (a008wlawne...
Page 16
8 si-606 user manual 1.5 hardware installation 1.5.1 mounting installation 1. Please install si-606 to the intended location using 4x m4*0.7*6l screws, as shown in the picture..
Page 17
Copyright © 2013 ibase technology inc. All rights reserved. 9 ibase technology inc. 1.5.2 installing the storage 1. Remove the two screws on the hdd cover and draw the hdd out. 2. Install the hdd/ssd to the hdd bracket with 4 screws..
Page 18
10 si-606 user manual 1.5.3 installing the rackmount 1. Please install system to the intended location using 12x m3 screws, as shown in the picture..
Page 20
12 si-606 user manual imbd60e board dimensions.
Page 21
Copyright © 2013 ibase technology inc. All rights reserved. 13 ibase technology inc. 2.2 installations 2.2.1 installing the memory the mbd60e board supports four ddr3 memory modules for a maximum total of 32gb in ddr3 sodimm memory type. Installing and removing memory modules to install the ddr3 mod...
Page 22
14 si-606 user manual 2.3 setting the jumpers jumpers are used on mbd60e to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on mbd60e and their resp...
Page 23
Copyright © 2013 ibase technology inc. All rights reserved. 15 ibase technology inc. Jp2: com1 rs232 ri/+5v/+12v power setting jp2 setting function pin 1-3 short/closed +12v pin 3-4 short/closed ri pin 5-3 short/closed +5v jp3: flash descriptor security override (factory use only) 2 1 1 2 5 6.
Page 24
16 si-606 user manual 2.4 connectors on mbd60e j1: com2 connector [hrs df11-10dp-2dsa(08)] signal name pin # pin # signal name data carrier detect 1 2 receive data transmit data 3 4 data terminal ready ground 5 6 data set ready request to send 7 8 clear to send ring indicator 9 10 not used j2: atx +...
Page 25
Copyright © 2013 ibase technology inc. All rights reserved. 17 ibase technology inc. J4, j5, j6, j7 ddr iii socket j8: mcu flash connector (factory use only) j9: debug port connector (factory use only) j10: reset pin header j11: mini pcie slot (full size with sim card) 1 4 10 9 2 1 2 1.
Page 26
18 si-606 user manual j12: mini pcie slot (full size with msata) j13: atx power supply connector signal name pin # pin # signal name 3.3v 13 1 3.3v -12v 14 2 3.3v ground 15 3 ground ps-on 16 4 +5v ground 17 5 ground ground 18 6 +5v ground 19 7 ground -5v 20 8 power good +5v 21 9 5vsb +5v 22 10 +12v ...
Page 27
Copyright © 2013 ibase technology inc. All rights reserved. 19 ibase technology inc. Cn1: com1 / dvi-i connector cn2: audio jack cn3: rtl8111g-cg /usb3.0 connector cn4: i218lm / usb3.0 connector cn5/6:sata 3 connector.
Page 28
20 si-606 user manual cpu_fan1: cpu fan power connector pin # signal name 1 ground 2 +12v 3 rotation detection 4 control gpu_fan1: gpu fan power connector pin # signal name 1 ground 2 +12v 3 rotation detection 4 control sys_fan1: system fan1 power connector pin # signal name 1 ground 2 +12v 3 rotati...
Page 29
Copyright © 2013 ibase technology inc. All rights reserved. 21 ibase technology inc. Sw1: power on button led1: pwr (green)/ hdd led (red) pcie1, pcie2, pcie3: dp signal from amd e8860 to idd100
Page 30: Chapter 3 Bios Setup
22 si-606 user manual chapter 3 bios setup this chapter describes the different settings available in the ami bios that comes with the board. The topics covered in this chapter are as follows: 3.1 bios introduction the bios (basic input/output s ystem) installed in your computer system’s rom support...
Page 31
Copyright © 2013 ibase technology inc. All rights reserved. 23 ibase technology inc. Main settings aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit system language [english] → ←select screen ↑↓select item enter: select +- change opt. F1...
Page 32
24 si-606 user manual advanced settings this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit ► acpi set...
Page 33
Copyright © 2013 ibase technology inc. All rights reserved. 25 ibase technology inc. Acpi settings aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit acpi settings → ←select screen ↑↓select item enter: select +- change opt. F1:general hel...
Page 34
26 si-606 user manual trusted computing aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit configuration → ←select screen ↑↓select item enter: select +- change opt. F1:general help f2:previous values f3: optimized defaults f4: save & exit...
Page 35
Copyright © 2013 ibase technology inc. All rights reserved. 27 ibase technology inc. Wake up event settings aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit → ←select screen ↑↓select item enter: select +- change opt. F1: general help f2...
Page 36
28 si-606 user manual cpu configuration this section shows the cpu configuration parameters. Aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit cpu configuration intel(r) core(tm) i7-4770s cpu @ 3.10ghz → ← select screen ↑↓select item ent...
Page 37
Copyright © 2013 ibase technology inc. All rights reserved. 29 ibase technology inc. Hyper-threading enabled for windows xp and linux (os optimized for hyper-threading technology) and disabled for other os (os not optimized for hyper-threading technology). When disabled only one thread per enabled c...
Page 38
30 si-606 user manual sata configuration aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit sata controller(s) enabled sata mode selection ahci sata controller speed default serial ata port 0 empty software preserve unknown port 0 enabled...
Page 39
Copyright © 2013 ibase technology inc. All rights reserved. 31 ibase technology inc. Shutdown temperature configuration aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit → ← select screen ↑↓select item enter: select +- change opt. F1:gen...
Page 40
32 si-606 user manual amt configuration aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit → ← select screen ↑↓select item enter: select +- change opt. F1:general help f2:previous values f3: optimized defaults f4: save & exit esc: exit in...
Page 41
Copyright © 2013 ibase technology inc. All rights reserved. 33 ibase technology inc. Amt wait timer set timer to wait before sending asf_get_boot_options. Activate remote assistance process trigger cira boot. Usb configure enable/disable usb configure function. Pet progress user can enable/disable p...
Page 42
34 si-606 user manual legacy usb support enables legacy usb support. Auto option disables legacy support if no usb devices are connected. Disable option will keep usb devices available only for efi applications. Usb3.0 support enable/disable usb3.0 (xhci) controller support. Xhci hand-off this is a ...
Page 43
Copyright © 2013 ibase technology inc. All rights reserved. 35 ibase technology inc. F81846 super io configuration aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit f81846 super io configuration → ← select screen ↑↓select item enter: sel...
Page 44
36 si-606 user manual f81846 h/w monitor aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit pc health status → ← select screen ↑↓select item enter: select +- change opt. F1:general help f2:previous values f3: optimized defaults f4: save &...
Page 45
Copyright © 2013 ibase technology inc. All rights reserved. 37 ibase technology inc. Chipset settings this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio setup utility – copyright © 2012 american megatrends, i...
Page 46
38 si-606 user manual pci express configuration aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit pci express configuration → ← select screen ↑↓select item enter: select +- change opt. F1:general help f2:previous values f3: optimized def...
Page 47
Copyright © 2013 ibase technology inc. All rights reserved. 39 ibase technology inc. Usb configuration main advanced chipset boot security save & exit usb configuration → ←select screen ↑↓ select item enter: select +- change opt. F1:general help f2:previous values f3: optimized defaults f4: save & e...
Page 48
40 si-606 user manual system agent (sa) configuration aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit system agent bridge name haswell → ← select screen ↑↓select item enter: select +- change opt. F1:general help f2:previous values f3: ...
Page 49
Copyright © 2013 ibase technology inc. All rights reserved. 41 ibase technology inc. Primary display select which of igfx/peg/pci graphics device should be primary display or select sg for switchable gfx. Primary peg select peg0/peg1/peg2/peg3 graphics device should be primary peg. Primary pcie sele...
Page 50
42 si-606 user manual boot settings this section allows you to configure the boot settings. Aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit boot configuration → ← select screen ↑↓select item enter: select +- change opt. F1:general help...
Page 51
Copyright © 2013 ibase technology inc. All rights reserved. 43 ibase technology inc. Fixed boot order priorities sets the system boot order csm parameters this section allows you to configure the boot settings. Aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset bo...
Page 52
44 si-606 user manual security settings this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit password d...
Page 53
Copyright © 2013 ibase technology inc. All rights reserved. 45 ibase technology inc. Save & exit settings aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit save changes and exit → ← select screen ↑↓select item enter: select +- change opt...
Page 54
46 si-606 user manual chapter 4 drivers installation the intel chipset drivers should be installed first before the software drivers to enable plug & play inf support for intel chipset components. Follow the instructions below to complete the installation. Important note: after installing your windo...
Page 55
Copyright © 2013 ibase technology inc. All rights reserved. 47 ibase technology inc. 3. When the welcome screen to the intel® chipset device software appears, click next to continue. 4. Click accept to accept the software license agreement and proceed with the installation process..
Page 56
48 si-606 user manual 5. On the readme file information screen, click install to continue the installation. 6. The setup process is now complete. Click finish to restart the computer and for changes to take effect..
Page 57
Copyright © 2013 ibase technology inc. All rights reserved. 49 ibase technology inc. 4.2 amd radeon e8860 graphics driver 1. Insert the dvd that comes with the board. Click system and then si-606 series products. Click amd radeon e8860 graphics driver. 2. When the welcome screen appears, click next ...
Page 58
50 si-606 user manual 4. Click install to continue the installation process..
Page 59
Copyright © 2013 ibase technology inc. All rights reserved. 51 ibase technology inc. 5. Select express and the installation location and click next. 6. Click accept to accept the end user license agreement..
Page 60
52 si-606 user manual 7. Setup complete. Click finish to restart the computer and for changes to take effect. 8. To reboot the system, click yes..
Page 61
Copyright © 2013 ibase technology inc. All rights reserved. 53 ibase technology inc. 4.3 realtek high definition audio driver 1. Insert the dvd that comes with the board. Click system and then si-606 series products. 2. Click realtek high definition audio driver..
Page 62
54 si-606 user manual 3. On the welcome to the installshield wizard screen, click yes to proceed with and complete the installation process. 4. The installshield wizard complete. Click finish to restart the computer and for changes to take effect..
Page 63
Copyright © 2013 ibase technology inc. All rights reserved. 55 ibase technology inc. 4.4 intel® i21x gigabit network driver 1. Insert the dvd that comes with the board. Click system and then si-606 series products. 2. Click intel® i21x gigabit network driver..
Page 64
56 si-606 user manual 3. When the welcome screen appears, click next. 4. Click next to to agree with the license agreement..
Page 65
Copyright © 2013 ibase technology inc. All rights reserved. 57 ibase technology inc. 5. Click the checkbox for drivers in the setup options screen to select it and click next to continue. 6. The wizard is ready to begin installation. Click install to begin the installation..
Page 66
58 si-606 user manual 7. When installshield wizard is complete, click finish..
Page 67
Copyright © 2013 ibase technology inc. All rights reserved. 59 ibase technology inc. 4.5 intel® management engine(me) driver follow the steps below to install the intel management engine. 1. Insert the dvd that comes with the board. Click system and then si-606 series products.And then intel® manage...
Page 68
60 si-606 user manual 3. Click yes to to agree with the license agreement. 4. When the setup progress screen appears, click next. Then, click finish when the setup progress has been successfully installed..
Page 70
62 si-606 user manual 4.6 intel® usb 3.0 extensible host controller driver 1. Insert the dvd that comes with the board. Click system and then si-606 series products. Click intel® usb 3.0 extensible host controller driver. 2. When the welcome screen to the installshield wizard for intel® usb 3.0 exte...
Page 71
Copyright © 2013 ibase technology inc. All rights reserved. 63 ibase technology inc. 3. Click yes to to agree with the license agreement and continue the installation. 4. On the readme file information screen, click next to continue the installation of the intel® usb 3.0 extensible host controller d...
Page 72
64 si-606 user manual 5. Setup complete. Click finish to restart the computer and for changes to take effect..
Page 73
Copyright © 2013 ibase technology inc. All rights reserved. 65 ibase technology inc. 4.7 realtek rtl8111g lan driver 1. Insert the dvd that comes with the board. Click system and then si-606 series products. Click realtek rtl8111g lan driver. 2. In the welcome screen, click next..
Page 74
66 si-606 user manual 3. When the ready to install the program screen appears, click install to continue. 4. When installshield wizard is complete, click finish..
Page 75
Copyright © 2013 ibase technology inc. All rights reserved. 67 ibase technology inc. Appendix a. I/o port address map each peripheral device in the system is assigned a set of i/o port addresses which also becomes the identity of the device. The following table lists the i/o port addresses used. Add...
Page 76
68 si-606 user manual b. Interrupt request lines (irq) peripheral devices use interrupt request lines to notify cpu for the service required. The following table shows the irq used by the devices on board. Level function irq0 system timer irq3 serial port #2 irq4 serial port #1 irq 5 intel(r) 8 seri...
Page 77
Copyright © 2013 ibase technology inc. All rights reserved. 69 ibase technology inc. C. Watchdog timer configuration the wdt is used to generate a variety of output signals after a user programmable count. The wdt is suitable for use in the prevention of system lock-up, such as when software becomes...
Page 78
70 si-606 user manual } //--------------------------------------------------------------------------- void enablewdt(int interval) { unsigned char bbuf; bbuf = get_f81846_reg(0x2b); bbuf &= (~0x20); set_f81846_reg(0x2b, bbuf); //enable wdto set_f81846_ld(0x07); //switch to logic device 7 set_f81846_...
Page 80
72 si-606 user manual //--------------------------------------------------------------------------- // // this code and information is provided "as is" without warranty of any // kind, either expressed or implied, including but not limited to the // implied warranties of merchantability and/or fitne...
Page 81
Copyright © 2013 ibase technology inc. All rights reserved. 73 ibase technology inc. //--------------------------------------------------------------------------- void set_f81846_ld( unsigned char ld) { unlock_f81846(); outportb(f81846_index_port, f81846_reg_ld); outportb(f81846_data_port, ld); lock...
Page 82
74 si-606 user manual //--------------------------------------------------------------------------- // // this code and information is provided "as is" without warranty of any // kind, either expressed or implied, including but not limited to the // implied warranties of merchantability and/or fitne...