Si-60e user manual si-60e user manual.
Ii si-60e user manual revision release date v1.0 2015/04/28.
Copyright © 2013 ibase technology inc. All rights reserved. Iii ibase technology inc. Copyright © 2013 ibase technology inc. All rights reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or...
Iv si-60e user manual table of contents setting up your system .......................................................................................................... V care during use ...................................................................................................................
Copyright © 2013 ibase technology inc. All rights reserved. V ibase technology inc. Safety information your si-60e is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety in...
Vi si-60e user manual care during use do not walk on the power cord or allow anything to rest on it. Do not spill water or any other liquids on your system. When the system is turned off, a small amount of electrical current still flows. Always unplug all power, and network cables from the power out...
Copyright © 2013 ibase technology inc. All rights reserved. Vii ibase technology inc. Acknowledgments ami is a registered trademark of ami software international, inc. Amd and ati are registered trademarks of amd corporation. Intel, pentium, and intel core are registered trademarks or trademarks of ...
1 si-60e user manual chapter 1 introduction 1.1 general description the “signature book™” si-60e is a professional digital signage system powered by 4 th gen. Intel ® core tm i desktop processors with amd radeon™ e8860 graphics. The si-60e integrates 12 hdmi ports with edid emulation function and on...
2 si-60e user manual 1.2 system specifications 1.2.1 hardware specifications model name si-60e system mainboard mbd60e cpu 4th generation intel® core™ i7/i5/i3 and pentium® qc/dc processors; up to 3.5ghz memory 4x ddr3 1600 mhz, max. 32gb i/o interface 12x hdmi with edid emulation function 1x dvi-i ...
Copyright © 2013 ibase technology inc. All rights reserved. 3 ibase technology inc. 1.2.2 dimensions.
4 si-60e user manual 1.2.3 i/o view si-60e front side si-60e rear side.
Copyright © 2013 ibase technology inc. All rights reserved. 5 ibase technology inc. 1.3 exploded view of the si-60e assembly.
6 si-60e user manual 1.3.1 parts description part no. Description part no. Description 1 si-60e_base 2 4028_fan 3 hdmi board module 4 power module 5 si-60e main board 6 si-60e_hdd-tray 7 si-60e_hdd-brk 8 screw f type m3*0.5 9 sata cable 10 2.5" sata hdd 11 m3 nut 12 m3 double screw bolt 13 si-60e_to...
Copyright © 2013 ibase technology inc. All rights reserved. 7 ibase technology inc. 1.4 packing list item no. Description qty 1 driver cd 1 2 power adaptor 1 3 power cord 1 1.4.1 optional items module wifi solution description wifi module wireless; pci-e mini card 802.11b/g/n [aw-ne238h] (a008wlawne...
8 si-60e user manual 1.5 hardware installation 1.5.1 mounting installation 1. Please install si-60e to the intended location using 4x m4*0.7*6l screws, as shown in the picture..
Copyright © 2013 ibase technology inc. All rights reserved. 9 ibase technology inc. 1.5.2 installing the storage 1. Remove the two screws on the hdd cover and draw the hdd out. 2. Install the hdd/ssd to the hdd bracket with 4 screws..
10 si-60e user manual chapter 2 motherboard introduction 2.1 introduction mbd60e jumpers and connectors.
Copyright © 2013 ibase technology inc. All rights reserved. 11 ibase technology inc. Imbd60e board dimensions.
12 si-60e user manual 2.2 installations 2.2.1 installing the memory the mbd60e board supports four ddr3 memory modules for a maximum total of 32gb in ddr3 sodimm memory type. Installing and removing memory modules to install the ddr3 modules, locate the memory slot on the board and perform the follo...
Copyright © 2013 ibase technology inc. All rights reserved. 13 ibase technology inc. 2.3 setting the jumpers jumpers are used on mbd60e to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your nee...
14 si-60e user manual jp2: com1 rs232 ri/+5v/+12v power setting jp2 setting function pin 1-3 short/closed +12v pin 3-4 short/closed ri pin 5-3 short/closed +5v jp3: flash descriptor security override (factory use only) 2 1 1 2 5 6.
Copyright © 2013 ibase technology inc. All rights reserved. 15 ibase technology inc. 2.4 connectors on mbd60e j1: com2 connector [hrs df11-10dp-2dsa(08)] signal name pin # pin # signal name data carrier detect 1 2 receive data transmit data 3 4 data terminal ready ground 5 6 data set ready request t...
16 si-60e user manual j4, j5, j6, j7 ddr iii socket j8: mcu flash connector (factory use only) j9: debug port connector (factory use only) j10: reset pin header j11: mini pcie slot (full size with sim card) 1 4 10 9 2 1 2 1.
Copyright © 2013 ibase technology inc. All rights reserved. 17 ibase technology inc. J12: mini pcie slot (full size with msata) j13: atx power supply connector signal name pin # pin # signal name 3.3v 13 1 3.3v -12v 14 2 3.3v ground 15 3 ground ps-on 16 4 +5v ground 17 5 ground ground 18 6 +5v groun...
18 si-60e user manual cn1: com1 / dvi-i connector cn2: audio jack cn3: rtl8111g-cg /usb3.0 connector cn4: i218lm / usb3.0 connector cn5/6:sata 3 connector.
Copyright © 2013 ibase technology inc. All rights reserved. 19 ibase technology inc. Cpu_fan1: cpu fan power connector pin # signal name 1 ground 2 +12v 3 rotation detection 4 control gpu_fan1: gpu fan power connector pin # signal name 1 ground 2 +12v 3 rotation detection 4 control sys_fan1: system ...
20 si-60e user manual sw1: power on button led1: pwr (green)/ hdd led (red) pcie1, pcie2, pcie3: dp signal from amd e8860 to idd100
Copyright © 2013 ibase technology inc. All rights reserved. 21 ibase technology inc. Chapter 3 bios setup this chapter describes the different settings available in the ami bios that comes with the board. The topics covered in this chapter are as follows: 3.1 bios introduction the bios (basic input/...
22 si-60e user manual main settings aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit system language [english] → ←select screen ↑↓select item enter: select +- change opt. F1:general help f2:previous values f3: optimized defaults f4: sav...
Copyright © 2013 ibase technology inc. All rights reserved. 23 ibase technology inc. Advanced settings this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio setup utility – copyright © 2012 american megatrends, ...
24 si-60e user manual acpi settings aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit acpi settings → ←select screen ↑↓select item enter: select +- change opt. F1:general help f2:previous values f3: optimized defaults f4: save & exit esc...
Copyright © 2013 ibase technology inc. All rights reserved. 25 ibase technology inc. Trusted computing aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit configuration → ←select screen ↑↓select item enter: select +- change opt. F1:general...
26 si-60e user manual wake up event settings aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit → ←select screen ↑↓select item enter: select +- change opt. F1: general help f2: previous values f3: optimized defaults f4: save & exit esc: e...
Copyright © 2013 ibase technology inc. All rights reserved. 27 ibase technology inc. Cpu configuration this section shows the cpu configuration parameters. Aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit cpu configuration intel(r) core...
28 si-60e user manual hyper-threading enabled for windows xp and linux (os optimized for hyper-threading technology) and disabled for other os (os not optimized for hyper-threading technology). When disabled only one thread per enabled core is enabled. Active processor cores number of cores to enabl...
Copyright © 2013 ibase technology inc. All rights reserved. 29 ibase technology inc. Sata configuration aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit sata controller(s) enabled sata mode selection ahci sata controller speed default s...
30 si-60e user manual shutdown temperature configuration aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit → ← select screen ↑↓select item enter: select +- change opt. F1:general help f2:previous values f3: optimized defaults f4: save & ...
Copyright © 2013 ibase technology inc. All rights reserved. 31 ibase technology inc. Amt configuration aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit → ← select screen ↑↓select item enter: select +- change opt. F1:general help f2:prev...
32 si-60e user manual amt wait timer set timer to wait before sending asf_get_boot_options. Activate remote assistance process trigger cira boot. Usb configure enable/disable usb configure function. Pet progress user can enable/disable pet events progress to receive pet events or not. Watchdog timer...
Copyright © 2013 ibase technology inc. All rights reserved. 33 ibase technology inc. Legacy usb support enables legacy usb support. Auto option disables legacy support if no usb devices are connected. Disable option will keep usb devices available only for efi applications. Usb3.0 support enable/dis...
34 si-60e user manual f81846 super io configuration aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit f81846 super io configuration → ← select screen ↑↓select item enter: select +- change opt. F1:general help f2:previous values f3: optim...
Copyright © 2013 ibase technology inc. All rights reserved. 35 ibase technology inc. F81846 h/w monitor aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit pc health status → ← select screen ↑↓select item enter: select +- change opt. F1:ge...
36 si-60e user manual chipset settings this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit ► pch-io co...
Copyright © 2013 ibase technology inc. All rights reserved. 37 ibase technology inc. Pci express configuration aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit pci express configuration → ← select screen ↑↓select item enter: select +- c...
38 si-60e user manual usb configuration main advanced chipset boot security save & exit usb configuration → ←select screen ↑↓ select item enter: select +- change opt. F1:general help f2:previous values f3: optimized defaults f4: save & exit esc: exit usb precondition disabled xhci mode auto usb port...
Copyright © 2013 ibase technology inc. All rights reserved. 39 ibase technology inc. System agent (sa) configuration aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit system agent bridge name haswell → ← select screen ↑↓select item enter...
40 si-60e user manual primary display select which of igfx/peg/pci graphics device should be primary display or select sg for switchable gfx. Primary peg select peg0/peg1/peg2/peg3 graphics device should be primary peg. Primary pcie select pcie0/pcie1/pcie2/pcie3/pcie4/pcie5/pcie6pcie7 graphics devi...
Copyright © 2013 ibase technology inc. All rights reserved. 41 ibase technology inc. Boot settings this section allows you to configure the boot settings. Aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit boot configuration → ← select sc...
42 si-60e user manual fixed boot order priorities sets the system boot order csm parameters this section allows you to configure the boot settings. Aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit → ← select screen ↑↓ select item enter:...
Copyright © 2013 ibase technology inc. All rights reserved. 43 ibase technology inc. Security settings this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Aptio setup utility – copyright © 2012 american megatrends, ...
44 si-60e user manual save & exit settings aptio setup utility – copyright © 2012 american megatrends, inc. Main advanced chipset boot security save & exit save changes and exit → ← select screen ↑↓select item enter: select +- change opt. F1:general help f2:previous values f3: optimized defaults f4:...
Copyright © 2013 ibase technology inc. All rights reserved. 45 ibase technology inc. Chapter 4 drivers installation the intel chipset drivers should be installed first before the software drivers to enable plug & play inf support for intel chipset components. Follow the instructions below to complet...
46 si-60e user manual 3. When the welcome screen to the intel® chipset device software appears, click next to continue. 4. Click accept to accept the software license agreement and proceed with the installation process..
Copyright © 2013 ibase technology inc. All rights reserved. 47 ibase technology inc. 5. On the readme file information screen, click install to continue the installation. 6. The setup process is now complete. Click finish to restart the computer and for changes to take effect..
48 si-60e user manual 4.2 amd radeon e8860 graphics driver 1. Insert the dvd that comes with the board. Click system and then si-60e series products. Click amd radeon e8860 graphics driver. 2. When the welcome screen appears, click next to continue. 3. Select the language you would like to be displa...
Copyright © 2013 ibase technology inc. All rights reserved. 49 ibase technology inc. 4. Click install to continue the installation process..
50 si-60e user manual 5. Select express and the installation location and click next. 6. Click accept to accept the end user license agreement..
Copyright © 2013 ibase technology inc. All rights reserved. 51 ibase technology inc. 7. Setup complete. Click finish to restart the computer and for changes to take effect. 8. To reboot the system, click yes..
52 si-60e user manual 4.3 realtek high definition audio driver 1. Insert the dvd that comes with the board. Click system and then si-60e series products. 2. Click realtek high definition audio driver..
Copyright © 2013 ibase technology inc. All rights reserved. 53 ibase technology inc. 3. On the welcome to the installshield wizard screen, click yes to proceed with and complete the installation process. 4. The installshield wizard complete. Click finish to restart the computer and for changes to ta...
54 si-60e user manual 4.4 intel® i21x gigabit network driver 1. Insert the dvd that comes with the board. Click system and then si-60e series products. 2. Click intel® i21x gigabit network driver..
Copyright © 2013 ibase technology inc. All rights reserved. 55 ibase technology inc. 3. When the welcome screen appears, click next. 4. Click next to to agree with the license agreement..
56 si-60e user manual 5. Click the checkbox for drivers in the setup options screen to select it and click next to continue. 6. The wizard is ready to begin installation. Click install to begin the installation..
Copyright © 2013 ibase technology inc. All rights reserved. 57 ibase technology inc. 7. When installshield wizard is complete, click finish..
58 si-60e user manual 4.5 intel® management engine(me) driver follow the steps below to install the intel management engine. 1. Insert the dvd that comes with the board. Click system and then si-60e series products.And then intel® management engine(me) driver. 2. When the welcome screen for intel® m...
Copyright © 2013 ibase technology inc. All rights reserved. 59 ibase technology inc. 3. Click yes to to agree with the license agreement. 4. When the setup progress screen appears, click next. Then, click finish when the setup progress has been successfully installed..
60 si-60e user manual.
Copyright © 2013 ibase technology inc. All rights reserved. 61 ibase technology inc. 4.6 intel® usb 3.0 extensible host controller driver 1. Insert the dvd that comes with the board. Click system and then si-60e series products. Click intel® usb 3.0 extensible host controller driver. 2. When the wel...
62 si-60e user manual 3. Click yes to to agree with the license agreement and continue the installation. 4. On the readme file information screen, click next to continue the installation of the intel® usb 3.0 extensible host controller driver..
Copyright © 2013 ibase technology inc. All rights reserved. 63 ibase technology inc. 5. Setup complete. Click finish to restart the computer and for changes to take effect..
64 si-60e user manual 4.7 realtek rtl8111g lan driver 1. Insert the dvd that comes with the board. Click system and then si-60e series products. Click realtek rtl8111g lan driver. 2. In the welcome screen, click next..
Copyright © 2013 ibase technology inc. All rights reserved. 65 ibase technology inc. 3. When the ready to install the program screen appears, click install to continue. 4. When installshield wizard is complete, click finish..
66 si-60e user manual 4.8 idd100 driver and utility 1.Insert the dvd that comes with the board. Click system and then si-60e series products. Click idd100 driver and utility. 2. Click cp210x installer.
Copyright © 2013 ibase technology inc. All rights reserved. 67 ibase technology inc. 3. In the welcome screen, click next. 4. When the license agreement the program screen appears, click i accept this agreement and next..
68 si-60e user manual 5.When complete the installation of the cp210x usb to uart bridge driver, click finish. 6.Click si-60e installer..
Copyright © 2013 ibase technology inc. All rights reserved. 69 ibase technology inc. 7. In the welcome screen, click next. 8. When the destination folder screen appears, click next..
70 si-60e user manual 9. When the ready to install the program screen appears, click install. 10.When installshield wizard complete, click finish..
Copyright © 2013 ibase technology inc. All rights reserved. 71 ibase technology inc. Appendix a. Ibase display matrix user manual software uart control application interface function description 1. Device list: max support up to 6 box 2. Auto loop pattern (button/hot key) 3. Rgbw pattern (button/hot...
72 si-60e user manual display mode table stretch (1x2) stretch (1x4) stretch (2x2) clone 3840x1200 7680x1200 3840x2400 1920x1200 3840x1080 7680x1080 3840x2160 1920x1080 3360x1050 6720x1050 3360x2100 1680x1050 3200x1200 6400x1200 3200x2400 1600x1200 3200x0900 6400x0900 3200x1800 1600x0900 2880x1050 5...
Copyright © 2013 ibase technology inc. All rights reserved. 73 ibase technology inc. How to setting 1x4 display step 1: enter to display control page step 2: go to mode status press enter step 3: press up / down key select to stretch step 4: go to display layout to select 1x4 step 5: go to up or dow...
74 si-60e user manual b. I/o port address map each peripheral device in the system is assigned a set of i/o port addresses which also becomes the identity of the device. The following table lists the i/o port addresses used. Address device description 0000h-001fh direct memory access controller 0000...
Copyright © 2013 ibase technology inc. All rights reserved. 75 ibase technology inc. C. Interrupt request lines (irq) peripheral devices use interrupt request lines to notify cpu for the service required. The following table shows the irq used by the devices on board. Level function irq0 system time...
76 si-60e user manual d. Watchdog timer configuration the wdt is used to generate a variety of output signals after a user programmable count. The wdt is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock. Under these sorts of circumstances, the...
Copyright © 2013 ibase technology inc. All rights reserved. 77 ibase technology inc. } //--------------------------------------------------------------------------- void enablewdt(int interval) { unsigned char bbuf; bbuf = get_f81846_reg(0x2b); bbuf &= (~0x20); set_f81846_reg(0x2b, bbuf); //enable w...
Copyright © 2013 ibase technology inc. All rights reserved. 79 ibase technology inc. //--------------------------------------------------------------------------- // // this code and information is provided "as is" without warranty of any // kind, either expressed or implied, including but not limit...
80 si-60e user manual //--------------------------------------------------------------------------- void set_f81846_ld( unsigned char ld) { unlock_f81846(); outportb(f81846_index_port, f81846_reg_ld); outportb(f81846_data_port, ld); lock_f81846(); } //------------------------------------------------...
Copyright © 2013 ibase technology inc. All rights reserved. 81 ibase technology inc. //--------------------------------------------------------------------------- // // this code and information is provided "as is" without warranty of any // kind, either expressed or implied, including but not limit...