Si-623-n digital signage player user’s manual version 1.0 (oct. 2017).
Ii si-623-n user manual copyright © 2017 ibase technology, inc. All rights reserved. No part of this publication may be reproduced, copied, stored in a retrieval system, translated into any language or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, witho...
Si-623-n user manual iii compliance the product described in this manual complies with all applicable european union (ce) directives if it has a ce marking. For systems to remain ce compliant, only ce-compliant parts may be used. Maintaining ce compliance also requires proper cable and cabling techn...
Iv si-623-n user manual important safety information carefully read the following safety information before using this device. Setting up your system: • put the device horizontally on a stable and solid surface. • do not use this product near water or any heated source. • leave plenty of space aroun...
Si-623-n user manual v warranty policy • ibase standard products: 24-month (2-year) warranty from the date of shipment. If the date of shipment cannot be ascertained, the product serial numbers can be used to determine the approximate shipping date. • 3 rd -party parts: 12-month (1-year) warranty fr...
Vi si-623-n user manual table of contents compliance..................................................................................................... Iii important safety information ........................................................................ Iv warranty policy ........................
Si-623-n user manual vii chapter 3 driver installation .................................................................. 23 3.1 introduction ............................................................................................ 24 3.2 intel ® chipset software installation utility ...............
1 chapter 1 general information the information provided in this chapter includes: • features • packing list • specifications • optional accessories • overview • dimensions.
2 si-623-n user manual 1.1 introduction the si-623-n is a fanless digital signage system powered by intel ® 7 th / 6 th generation mobile processors. It supports three display outputs for hdmi high definition video playback and ismart energy-saving features such as power on/off scheduling and power ...
General information si-623-n user manual 3 1 1.3 packing list if you buy a barebone si-623-n, your product package should include the items listed below. If any of the items below is missing, contact the distributor or the dealer from whom you have purchased the product. Drivers and this user manual...
4 si-623-n user manual 1.5 specifications product si-623-n system mainboard mbd623 operating system • windows 10 (64-bit) • windows 8.1 (64-bit) • windows 7 (32-bit / 64-bit), • linux fedora / ubuntu * embedded os will be tested by request. Cpu intel ® 7 th / 6 th gen. Core™ mobile processor chipset...
General information si-623-n user manual 5 1 serial • 1 x rj45 for com1 rs-232 port • 1 x onboard pin-header for com2 rs-232 port usb • 2 x usb 3.0 • 2 x usb 2.0 audio jack • 1 x line-out • 1 x mic-in power jack 1 x dc-in power jack sim 1 x sim card socket expansion • 1 x m.2 b key (3042) with pcie ...
6 si-623-n user manual 1.6 overview top view wall mount side mount remarks: the same set (2pcs) of mounting kit can be used for wall mount or side mount methods as shown above..
General information si-623-n user manual 7 1 i/o view no. Name no. Name 1 dc power input 8 com port 2 edid button * 9 audio jacks (from left to right: line-out, mic-in) 3 hdmi 2.0 port 10 led indicator for hdd 4 hdmi 1.4 ports 11 power button 5 usb 3.0 12 led indicator for power 6 usb 2.0 13 mountin...
8 si-623-n user manual 1.7 dimensions unit: mm.
9 chapter 2 hardware installation & motherboard information this section contains general information about: • essential installations instructions • jumper and connectors.
10 si-623-n user manual 2.1 installations before installing any card or module into the device, remove the screws shown in the picture below. Pull out the side covers and then remove the bottom cover. 2.1.1 memory module installation to install or replace modules, locate the memory slot on the board...
Motherboard information si-623-n user manual 11 2 2.1.2 mini-pcie & m.2 cards installation 1. Align the mini-pcie card ’s bus connector with the mini-pcie slot, and insert the card slantwise. (insert m.2 cards by using the same method.) 2. Push the mini pcie card downwards as shown in the picture, a...
12 si-623-n user manual 2.1.3 wifi / 3g / 4g antenna installation insert the wifi / 3g / 4g antenna extension cable through the antenna hole of the front i/o cover and fasten the antenna as shown below. Then apply adhesive around the hex nut behind the front i/o cover to prevent the extension cable ...
Motherboard information si-623-n user manual 13 2 2.1.5 mounting installation requirements before mounting the system, ensure that you have enough room for the power adaptor and signal cable routing, and have good ventilation for the power adaptor. The method of mounting must be able to support weig...
14 si-623-n user manual 2.1.6 pin assignment for power input connector pin signal pin signal 1 ground 3 +12v 2 ground 4 +12v 4 3 2 1.
Motherboard information si-623-n user manual 15 2 2.2 setting the jumpers configure your si-623-n by using jumpers to enable the features that you need based on your applications. Contact your supplier if you have doubts about the best configuration for your use. 2.2.1 how to set jumpers jumpers are...
16 si-623-n user manual 2.3 jumper & connector locations on motherboard motherboard: mbd623 mbd623 – top view.
Motherboard information si-623-n user manual 17 2 mbd623 – bottom view.
18 si-623-n user manual 2.4 jumper & connectors quick reference jumper: function connector name page clearing cmos data jp7 19 connectors: function connector name page cpu fan power j3: 20 usb 2.0 ports header j12 21 com2 rs-232 port j10 20 system function j14 22 digital i/o header j13 22 ngff m.2 b...
Motherboard information si-623-n user manual 19 2 2.4.1 clearing cmos data (jp7) function pin closed illustration normal (default) 1-2 clear cmos 2-3 2.4.2 dc power input (cn12) pin signal pin signal 1 ground 3 +12v 2 ground 4 +12v 1 1 1 4 3 2 1.
20 si-623-n user manual 2.4.3 com1 rs-232 port (cn7) (rj45 connector) pin signal name pin signal name 1 dsr (data set ready) 6 dcd (data carrier detect) 2 ground 7 dtr (data terminal ready) 3 ground 8 cts (clear to send) 4 tx (transmit) 9 rts (request to send) 5 rx (receive) 10 ri (ring indicator) 2...
Motherboard information si-623-n user manual 21 2 2.4.5 usb 2.0 ports header (j12) pin signal name pin signal name 1 +5v 2 +5v 3 data- 4 data- 5 data+ 6 data+ 7 ground 8 ground 2.4.6 com2 rs-232 port (j10) pin signal name pin signal name 1 dcd (data carrier detect) 2 dsr (data set ready) 3 rxd (rece...
22 si-623-n user manual 2.4.7 system function connector (j14) pin signal name pin signal name 1 power btn 2 power btn 3 hdd led+ 4 hdd led- 5 reset btn 6 reset btn 7 +5v 8 +5vsb 2.4.8 digital i/o connector (j13) pin signal name pin signal name 1 ground 2 +5v 3 out3 4 out1 5 out2 6 out0 7 in3 8 in1 9...
23 chapter 3 driver installation the information provided in this chapter includes: • intel ® chipset software installation utility • intel ® hd graphics drivers • hd audio drivers • lan network drivers • intel ® management engine components drivers.
24 si-623-n user manual 3.1 introduction this section describes the installation procedures for software drivers. The software drivers are available on ibase website www.Ibase.Com.Tw . Register as a member on our website to download all the necessary drivers. Note: after installing your windows oper...
Driver installation si-623-n user manual 25 3 3.3 intel ® graphics driver installation 1. Run the setup.Exe file. 2. When the welcome screen appears, click next to continue. 3. Click yes to agree with the license agreement and continue the installation. 4. On the readme file information and setup pr...
26 si-623-n user manual 3.4 hd audio driver installation 1. Run the setup.Exe file and the wizard starts. 2. On the welcome screen of the installshield wizard, click next to start installing the audio driver on your system. 3. Installation is now complete. Restart the system for changes to take effe...
Driver installation si-623-n user manual 27 3 3.5 lan driver installation 1. Run the setup.Exe file. 2. On the welcome screen of the installshield wizard, click next to continue. 3. Accept the license agreement and click next. 4. On the setup options screen, tick the checkbox to select the desired d...
28 si-623-n user manual 3.6 intel ® management engine components drivers installation 1. Run the setup.Exe file. 2. When the welcome screen appears, click next. 3. Accept the license agreement and click next for installation. 4. Installation is now complete. Restart the system for changes to take ef...
29 chapter 4 bios setup this chapter describes the different settings available in the ami bios that comes with the board. The topics covered in this chapter are as follows: • main settings • advanced settings • chipset settings • security settings • book settings • save & exit.
30 si-623-n user manual 4.1 introduction the bios (basic input/output system) installed in the rom of your computer system supports intel® processors. The bios provides critical low-level support for standard devices such as disk drives, serial ports and parallel ports. It also provides password pro...
Bios setup si-623-n user manual 31 4 4.3 main settings bios setting description system language choose the system default language. System date sets the date. Use the key to switch between the data elements. System time set the time. Use the key to switch between the data elements..
32 si-623-n user manual 4.4 advanced settings this section allows you to configure, improve your system and allows you to set up some system features according to your preference. 4.4.1 m.2 (ngff) configuration bios setting description m.2 (ngff) b-key configures m.2 (ngff) b-key function..
Bios setup si-623-n user manual 33 4 4.4.2 ismart controller bios setting description power-on after power failure enables / disables the system to be turned on automatically after a power failure. Temperature guardian generate the reset signal when system hands up on post. Schedule slot 1 / 2 sets ...
34 si-623-n user manual 4.4.3 amt configuration bios setting description intel amt enables / disables intel(r) active management technology bios extension. Note: iamt h/w is always enabled. This option just controls the bios extention execution. If enabled, additional firmware in the spi device are ...
Bios setup si-623-n user manual 35 4 4.4.4 f81846 super io configuration bios setting description serial port configuration sets parameters of serial ports (coma). Enables / disables the serial port and select an optimal setting for the super io device. 4.4.4.1. Serial port 1 configuration bios sett...
36 si-623-n user manual 4.4.4.2. Serial port 2 configuration bios setting description serial port sets parameters of serial ports (coma). Change settings selects an optimal settings for super i/o device. Options: • auto • io = 2f8h; irq = 3 • io = 3f8h; irq = 3, 4, 5, 6, 7, 9, 10, 11, 12 • io = 2f8h...
Bios setup si-623-n user manual 37 4 4.4.4.3. Serial port 3 configuration bios setting description serial port sets parameters of serial ports (coma). Change settings selects an optimal settings for super i/o device. Options: • auto • io = 3e8h; irq = 5 • io = 3e8h; irq = 3, 4, 5, 6, 7, 9, 10, 11, 1...
38 si-623-n user manual 4.4.5 hardware monitor bios setting description smart fan 1 function selects the smart fan mode. Acpi shutdown temperature this field enables or disables the shutdown temperature temperatures / voltages these fields are the parameters of the hardware monitoring function featu...
Bios setup si-623-n user manual 39 4 4.4.6 cpu configuration bios setting description intel virtualization technology when the function is enabled,a vmm can utilize the additional hardware capabilities provided by vanderpool technology..
40 si-623-n user manual 4.4.7 sata configuration bios setting description sata controller(s) enables / disables sata devices. Sata mode selection determines how the sata controller(s) operate. Options: ahci mode, raid mode serial ata ports enables / disables serial ports. Hot plug designates this po...
Bios setup si-623-n user manual 41 4 4.4.8 csm configuration bios setting description csm support enables or disables csm support..
42 si-623-n user manual 4.4.9 usb configuration bios setting description legacy usb support • enable: enables ledacy usb support. • auto: disables legacy support if no usb devices are connected. • disable: keeps usb devices available only for efi applications. Xhci hand-off this is a workaround for ...
Bios setup si-623-n user manual 43 4 4.5 chipset settings bios setting description system agent (sa) configuration system agent parameters pch-io configuration pch parameters 4.5.1 system agent bridge name.
44 si-623-n user manual 4.5.2 pch-io configuration bios setting description pci express configuration pci express configuration settings.
Bios setup si-623-n user manual 45 4 4.6 security settings bios setting description administrator password sets an administrator password for the setup utility. User password sets a user password..
46 si-623-n user manual 4.7 boot settings bios setting description setup prompt timeout number of seconds to wait for setup activation key. 65535 (0xffff) means indefinite waiting. Bootup numlock state selects the keyboard numlock state. Quiet boot enables / disables quiet boot option. Fast boot ena...
Bios setup si-623-n user manual 47 4 4.8 save & exit settings bios setting description save changes and exit exits system setup after saving the changes. Discard changes and exit exits system setup without saving any changes. Save changes and reset resets the system after saving the changes. Discard...
48 appendix this section provides the mapping addresses of peripheral devices and the sample code of watchdog timer configuration. • i/o port address map • interrupt request lines (irq) • digital i/o sample code • watchdog timer configuration.
Appendix si-623-n user manual 49 a. I/o port address map each peripheral device in the system is assigned a set of i/o port addresses which also becomes the identity of the device. The following table lists the i/o port addresses used. Address device description 0x00000a00-0x00000a0f motherboard res...
50 si-623-n user manual address device description 0x00000038-0x00000039 programmable interrupt controller 0x0000003c-0x0000003d programmable interrupt controller 0x000000a0-0x000000a1 programmable interrupt controller 0x000000a4-0x000000a5 programmable interrupt controller 0x000000a8-0x000000a9 pro...
Appendix si-623-n user manual 51 b. Interrupt request lines (irq) peripheral devices use interrupt request lines to notify cpu for the service required. The following table shows the irq used by the devices on board. Level function irq 0 system timer irq 1 standard ps/2 keyboard irq 3 communications...
52 si-623-n user manual c. Watchdog timer configuration the watchdog timer (wdt) is used to generate a variety of output signals after a user programmable count. The wdt is suitable for the use in the prevention of system lock-up, such as when software becomes trapped in a deadlock. Under these sort...
Appendix si-623-n user manual 53 //--------------------------------------------------------------------------- void enablewdt(int interval) { unsigned char bbuf; bbuf = get_f81846_reg(0x2b); bbuf &= (~0x20); set_f81846_reg(0x2b, bbuf); //enable wdto set_f81846_ld(0x07); //switch to logic device 7 se...
54 si-623-n user manual //--------------------------------------------------------------------------- // // this code and information is provided "as is" without warranty of any // kind, either expressed or implied, including but not limited to the // implied warranties of merchantability and/or fit...
Appendix si-623-n user manual 55 } //--------------------------------------------------------------------------- void set_f81846_reg( unsigned char reg, unsigned char data) { unlock_f81846(); outportb(f81846_index_port, reg); outportb(f81846_data_port, data); lock_f81846(); } //---------------------...