Ibis 500 Owner's Manual - Ibis
IBIS
Page 8
HC500
Power Handling
85 / 150 Watt (s)
Frequency Response
55 – 40 000 Hz
Impedence
6 Ohms normal
Sensitivity
90dB/2.83V/1m
Amplifier Compatibility
25 – 150 Watt (s) into 6 Ohms
Positioning
Not less than 20cm from rear wall, Either above or
below the LCD or LED monitor, if close to the floor,
angle the speaker up a little to aim at listener’s face
Tweeter
IBIS IHT2540N, 25mm titanium dome, Neodymium
magnet system with aluminium heat sink, Dimond
cutted Aluminium front plate with designed special
horn projection
Woofer
130mm aluminium cone with high grade rubber edge
and high temperature voice coil, die-cast aluminium
frame, double magnet system with sheilding cup,
conex spider
Crossover
Bi-wirable
Cabinet
18mm MDF panel for all solid construction, special soft
touch paint finishing, Additional front panel made by
tempered black glass with soft silicon dioxide adapter
Finish
Black rubber painting, white rubber painting
Feet
Diamond cutted aluminium feet with special silicon
dioxide adapter
Terminal
Hairlined and anodised aluminium panel with 2 pairs
gold plated binding posts, Bi-wirable
Size (HxWxD) – mm
450 x 174 x 230
Packaged
One piece per carton
Weight
10kg per single speaker, 11.2kg per carton