Ibis MOJo 3 Instruction Book - page 32
61
60
steP 1
Put your freshly cleaned Mojo in
a work stand. Remove the front
derailleur, cranks, and the rear
wheel. Remove the shock and clevis
assembly by removing the upper
shock mount bolt and shaft with two
4mm Allen wrenches. Next, remove
the clevis to swingarm bolts with a
5mm Allen.
steP 3
Remove the lower shock mount
bolt with two 6mm Allens.
steP 4
Remove front lower link shaft and
the two forward upper link bolts.
steP 5
Pull the swingarm with the
linkages still attached away from
the front triangle.
steP 6
Remove the axle in the lower link
that passes through the swingarm
and separate the link from the
swingarm. Also remove the upper
link from the swingarm.
* To reassemble your bike, follow the steps in reverse order. Remember to use a little Loctite blue thread locker
(we prefer Loctite
243)
on all steel and aluminum fasteners, and to use anti–seize on all titanium fasteners.
Refer to the torque chart on page 50.
steP 2
Carefully separate the shock and
clevis assembly from the frame.
MOJO HD3 / MOJO 3
: sWIngarM reMoval
sWIngarM reMoval :
MOJO HD3 / MOJO 3
M
a
IN
Ta
IN
M
a
IN
Ta
IN