DL manuals
IBM
Switch
3110G
Supplementary Manual

IBM 3110G Supplementary Manual

Manual is about: Gigabit Ethernet Switch

Page of 20

Download

Print this page

Bookmark us

Cisco Catalyst Switch Modules 3110G and 3110X for IBM BladeCenter

Cisco Catalyst Switch Modules 3110G and 3110X for

IBM BladeCenter

IBM BladeCenter at-a-glance guide

The Cisco Catalyst Switch Module 3110G and 3110X are Gigabit Ethernet Switch Modules in a standard

switch-bay form-factor for use in all BladeCenter chassis. These stackable switches are full wire-rated,

non-blocking switches for use with high performance servers. The 3110G offers four external RJ-45

Gigabit Ethernet connections and the 3110X offers one external 10 Gb Ethernet slot (for use with an X2

transceiver module) for making 10Gb uplinks to backbone switches or routers.

Built upon Cisco's market-leading hardware and IOS software, the switches are designed to deliver

scalable, high performance, highly resilient connectivity while reducing server infrastructure complexity.

Figure 1. Cisco Catalyst Switch Module 3110G (left) and 3110X (right). The 3110X has a separate X2

transceiver module installed.

Did you know?

The Cisco Catalyst Switch Module 3110 has a unique technology called Virtual Blade Switch (VBS). Much

like server virtualization technology, this switch virtualization technology treats the individual physical

switches within a rack as a single logical switch. As with server virtualization technology, this innovation

allows the switches to deliver better utilization, increased performance, and greater resilience while

simplifying operations and management.

1 2 3 4 5 6 7 Next › »

Summary of 3110G

Page 1
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 1 ® cisco catalyst switch modules 3110g and 3110x for ibm bladecenter ibm bladecenter at-a-glance guide the cisco catalyst switch module 3110g and 3110x are gigabit ethernet switch modules in a standard switch-bay form-factor for use ...
Page 2
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 2 part number information table 1. Part numbers and feature codes for ordering description ibm part number feature code cisco part number cisco catalyst switch module 3110g 41y8523 2989 none cisco catalyst switch module 3110x 41y8522 ...
Page 3
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 3 table 3. Transceivers for the cisco catalyst switch module 3110x description cisco part number 10gbase-cx4 x2 transceiver module for cx4 cable, copper, infiniband 4x connector x2-10gb-cx4= 10gbase-sr x2 transceiver module for mmf, 8...
Page 4
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 4 internet group management protocol (igmp) snooping support to limit flooding of ip multicast z traffic. Multicast virtual local area network (vlan) registration (mvr) to continuously send multicast z streams in a multicast vlan whil...
Page 5
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 5 availability and redundancy z hot standby routing protocol (hsrp) for layer 3 router redundancy. Z automatic stack master failover for replacing failed stack masters. Z cross-stack etherchannel for providing redundant links across s...
Page 6
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 6 password-protected access (read-only and write-only access) to management interfaces (the z device manager and cli) for protection against unauthorized configuration changes. Port security option for limiting and identifying mac add...
Page 7
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 7 policing z traffic-shaping policies on the switch port for managing how much of the port bandwidth z should be allocated to a specific traffic flow. Out-of-profile markdown for packets that exceed bandwidth utilization limits. Z ing...
Page 8
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 8 protocol-independent multicast (pim) for multicast routing within the network, allowing for devices z in the network to receive the multicast feed requested and for switches not participating in the multicast to be pruned. Includes ...
Page 9
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 9 on-board failure logging (obfl) to collect information about the switch and the power supplies z connected to it. Enhanced object tracking (eot) for hsrp to determine the proportion of hosts in a lan by z tracking the routing table ...
Page 10
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 10 virtual blade switch technology virtual blade switch (vbs) technology allows you to combine several physical network switches into one logical entity by using high-speed dedicated stacking ports on these switches to form a high-spe...
Page 11
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 11 you need to take several considerations into account when planning vbs deployment: vbs stacking is well-suited to the concept of rack-level management, so we recommend that you z build one vbs (or more vbses, if the network paths f...
Page 12
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 12 supported bladecenter chassis and expansion cards the cisco catalyst switch modules 3110g and 3110x are supported in the ibm bladecenter chassis as listed in table 4. Table 4. Ibm bladecenter chassis that support the cisco catalyst...
Page 13
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 13 popular configurations this section shows how the cisco catalyst switch modules 3110g and 3110x can be used in configurations. Basic two-port configuration figure 3 shows basic use of the cisco catalyst switch modules 3110 to route...
Page 14
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 14 four-port configuration figure 4 shows the use of four cisco catalyst switch module 3110 units to route four ethernet ports from each server: the two integrated ports plus two ports supplied by a compatible cffv or ciov expansion c...
Page 15
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 15 maximum configuration: eight ethernet ports per server since bladecenter servers support a cffh expansion card plus either a cffv or ciov card (depending on the model of the server), you can install up to eight cisco catalyst switc...
Page 16
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 16 connectors and leds figure 6 shows the front panels of the cisco catalyst switch module 3110g and 3110x. Figure 6. Front panel of the cisco catalyst switch module 3110g (left) and 3110x (right). The front panel contains the compone...
Page 17
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 17 network cabling requirements the network cables required for the switch module are as follows. Cisco catalyst switch module 3110g network cables 10base-t: z utp category 3, 4, 5 (100 meters (328 feet) maximum) z 100-ohm stp (100 me...
Page 18
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 18 operating environment the operating environment must meet the following temperature and altitude requirements: temperature: 10° to 35°c (50° to 95°f) z relative humidity: 8% to 80% non-condensing z related publications for more inf...
Page 19: Notices
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 19 notices this information was developed for products and services offered in the u.S.A. Ibm may not offer the products, services, or features discussed in this document in other countries. Consult your local ibm representative for i...
Page 20: Trademarks
Cisco catalyst switch modules 3110g and 3110x for ibm bladecenter 20 this document was created or updated on november 13, 2009. Send us your comments in one of the following ways: use the online contact us review form found at: z ibm.Com/redbooks send your comments in an e-mail to: z redbook@us.Ibm....