- DL manuals
- IBM
- Keyboard
- 4685-K03
- Installation, Operation And Maintenance Manual
IBM 4685-K03 Installation, Operation And Maintenance Manual
Summary of 4685-K03
Page 1
Ibm 4685-k03 pos keyboard installation, operation, and maintenance guide p/n 29r0777.
Page 2
Ibm is a trademark of the ibm corporation in the united states or other countries. First edition (may 2006) this manual is revised in accordance with product improvements or for other reasons. © copyright international business machines corporation 2006. All rights reserved..
Page 3: Introduction
Introduction this manual provides an overview, installation instructions, operating guidelines, instructions on how to replace the keys, and general maintenance information for the ibm™ 4685-k03 pos keyboard. In this manual, the ibm 4685-k03 pos keyboard may be referred to as the 4685-k03 or as the ...
Page 4: Notices
_________________________________________________________________ notices _________________________________________________________________________________________ electronic emission notices japanese voluntary control council for interference (vcci) statement this product is class a information tec...
Page 5: Related Publications
Handling removed cards logic cards removed from a product should be placed in esd protective containers. No other object should be allowed inside the esd container with the logic card. Attach tags or reports that must accompany the card to the outside of the container . _____________________________...
Page 6
Vi ibm 4685-k03 installation, operation and maintenance guide.
Page 7
Safety information for users safety instructions vii.
Page 8
Safety information for service personnel before you begin to install or service this product, please read the following safety information. Note: in these notices, the term, qualified service personnel, refers to a person with the skills to perform a pc upgrade. _____________________________________...
Page 9
Safety instructions ix.
Page 10
_________________________________________________________________________________________ safety information for korea x ibm 4685-k03 installation, operation and maintenance guide.
Page 11
Safety instructions xi.
Page 13: Contents
Contents introduction .....................................................................................................................................................................Iii who should use this guide ......................................................................................
Page 14
Xiv ibm 4685-k03 installation, operation and maintenance guide daily care ............................................................................................................................................................................ 12 chapter 4 “replacing the keys” ......................
Page 15: An Overview
Chapter 1 “an overview of the ibm 4685-k03 pos keyboard” this chapter provides an overview of the ibm 4685-k03 pos keyboard, explains how to confirm the identification of the product, gives the names of the parts, and describes the key layout at time of shipment. ____________________________________...
Page 16: Confirmation of Product
_________________________________________________________________________________________ confirmation of product confirm the following parts are included. 4685-k03 model □ 4685-k03 keyboard □ keys 1 set (single keys: 54 pieces double keys: 4 pieces) □ mode keys label 1 □ mode keys operator key (“op...
Page 18: Parts Name
_________________________________________________________________________________________ parts name 4685-k03 model mode switch msr system keys s1 s2 2 ibm 4685-k03 installation, operation and maintenance guide.
Page 19: 4685-K03 Model
_________________________________________________________________________________________ key layout at shipment time 4685-k03 model chapter 1 outline for ibm 4685-k02 pos keyboard 3.
Page 21
Chapter 2 “installing the keyboard” this section explains how the keyboard is installed on the ibm 4800 pos terminal. _________________________________________________________________________________________ installation for ibm 4800 pos terminal this section explains how keyboard is installed on th...
Page 22
With the video display without the video display 3. Put the keyboard in place on the system device. 6 ibm 4685-k03 installation, operation and maintenance guide.
Page 23
Chapter 2 installing the keyboard 7 4. Connect the keyboard cable to the system device. (see the instruction manual that comes with the ibm 4800 pos terminal for more information about how to connect the keyboard cable to the system device.).
Page 25: System Keys
Chapter 3 “operating the keyboard” this chapter explains the operating procedures and the functions of the parts. _________________________________________________________________________________________ system keys the system keys are used to input system functions, which are run under the control ...
Page 26
10 ibm 4685-k03 installation, operation and maintenance guide notes: 1. Use your fingers, not a tool, when adjusting the speaker volume. 2. The volume adjustment control is on the bottom of the keyboard. The speaker volume should be set when installing the keyboard on the system device..
Page 27: Mode Switch
_________________________________________________________________________________________ mode switch the key-controlled mode switch is used to select the operating mode of the 4685-k03. The mode switch has four positions that are selected with mode keys. Both the operator key and manager key will c...
Page 28: Daily Care
________________________________________________________________________________________ how to swipe a card through the msr this section explains how to swipe a card through the msr (magnetic stripe reader). 1. Hold the card horizontally with the stripe at the bottom and facing away from the keyboa...
Page 29
Chapter 3 operating the keyboard 13.
Page 31: Replacing A Single Key
Chapter 4 “replacing the keys” you are free to change the layout of the keys except for the ten keys of the numeric keypad. For example, frequently used keys can be made into larger double keys by replacing two single keys with one double key. This chapter explains how to replace single keys, double...
Page 32: Attaching
3. Remove the black rubber ring. Rubber ring (black) attaching 1. Insert the black rubber ring. Insert the cup with the larger opening facing up. 2. Insert the key. Be careful not to bend the spring attached to the key. 3. Attach the key. Rubber ring (black) key spring 16 ibm 4685-k03 installation, ...
Page 33: Replacing A Double Key
_________________________________________________________________________________________ replacing a double key removal 1. Pull off the key cap with the removal tool. (see “replacing a single key” on page 17.) 2. Pinch the key lightly with the removal tool, and pull it out. Be careful not to bend t...
Page 34: Attaching
Attaching 1. Insert the key guide into the hole that will not use a scan code. 2. Insert the brown rubber ring around the hole where the key guide was inserted. Insert the black rubber ring at the location without the key guide. 3. Insert the key. Be careful not to bend the springs attached to the k...
Page 35: Replacing A Quadruple Key
_________________________________________________________________________________________ replacing a quadruple key removal the removal procedure for quadruple keys is the same as for single or double keys. 1. Pull off the key cap with the removal tool. 2. Pull off the key with the removal tool. Be ...
Page 36: Removal
3. Make sure the scan code leg is aligned with the proper hole, and insert the quadruple key. Be careful not to bend the springs attached to the key. 4. Label the key cap. Attach the key cap on top of the key. Key spring _______________________________________________________________________________...
Page 37: If Problems Occur
Chapter 5 “maintenance of the keyboard” this section is provided for the maintainer of the ibm 4685-k03 pos keyboard. Be sure to read “safety instructions” on page ⅴ and “safety inspection guide” on page ⅶ before working on this product. ______________________________________________________________...
Page 38: Diagnostic Tests
22 ibm 4685-k03 installation, operation and maintenance guide symptom causes and actions the msr is unable to read cards. Cause 1 action 1 cause 2 action 2 action 3 there msr reading head needs to be cleaned. Clean the msr reading head by using the msr cleaning card in the hardware service kit (p/n:...
Page 39
Chapter 5 maintenance of the keyboard 23 mode switch test (self-diagnostic test) switching the mode key switch to a new position should cause the speaker to beep once. Msr test (self-diagnostic test) if a magnetic card is scanned through the msr, the speaker should beep twice. Key input test (self-d...
Page 40: Removing and Replacing Parts
_________________________________________________________________________________________ removing and replacing parts replacing the rear cover 1. Remove the 7 screws labeled 1 . Remove the rear cover 2 . Reverse the procedure to reassemble. 1 2 24 ibm 4685-k03 installation, operation and maintenanc...
Page 41: Replacing The Control Card
Replacing the control card 1. Remove the rear cover. See “replacing the rear cover” on page 22. 2. Remove the screw labeled 2 which holds the ground cable 1 and the cover. 3. Open the cover. Disconnect the cables of two sheets for the membrane 4 and the other connectors from the control card 3 . 4. ...
Page 42
2 1 26 ibm 4685-k03 installation, operation and maintenance guide.
Page 43: Replacing The Mode Key
Replacing the mode key 1. Detach the guide label. Remove the two screws labeled 1 2. Remove the rear cover. See “replacing the rear cover” on page 22. 3. Disconnect the cable leading to the control card. Remove the mode key 2 . Reverse the procedure to reassemble. Use the new guide label attached to...
Page 44: Bill of Material
_________________________________________________________________________________________ bill of material assembly: keyboard 3 1 2 4 5 6 3 28 ibm 4685-k03 installation, operation and maintenance guide.
Page 45
Chapter 5 maintenance of the keyboard 29 asm-index part number unit description 1 2 3 4 5 6 29r0782 29r0784 29r0786 29r0783 29r0785 29r0787 29r0788 07n1027 07n1032 07n1033 48g9045 29r0789 1 1 1 1 1 1 pos keyboard unit, 4685-k03 z bottom cover asm z control card asm z top cover, asm z magnetic stripe...
Page 46
30 ibm 4685-k03 installation, operation and maintenance guide.
Page 47: Appendix A. Accessory Unit
_________________________________________________________________________________________ appendix a. Accessory unit you should order accessory units from an ibm sales representative or your dealer. Accessory units item number name content quantity 3891 key (single) key (single) key cap (single) key...
Page 48
32 ibm 4685-k03 installation, operation and maintenance guide.
Page 49: Dimensions
Appendix b. Product specifications dimensions 4685-k03 width 365 mm depth 170 mm height 50 mm weight 1.1 kg consumption current peak: 400 ma normal: 100 ma environment condition condition temperature(℃) humidity (%) max wet bulb temperature(℃) operating 0 ~ +40 8 ~ 90 +23 standby 0 ~ +43 8 ~ 90 +27 ...
Page 50
Printed in japan ibm japan, ltd. 〒 106-8711 roppongi 3-2-12, minato-ku, tokyo.