IBM 49387NU - C117 17IN Crt Mntr User Manual - page 9
•
Power Indicator :
Green — Power On mode.
Orange — Off mode
.
How to adjust a setting
The monitor controls are accessed by pressing button MENU to enable OSD
(On-Screen-Display). The main menu will be displayed as follows.
Figure 4 The OSD Message
Note:
If adjustment or selection of any OSD menu is not made for more than 10 seconds,
the current setup will be saved and the OSD will disappear automatically.
ADJUSTING THE PICTURE
1
CONTRAST
Adjust the picture contrast.
2
BRIGHTNESS
Adjust the picture brightness.
3
H-CENTER
Adjust the horizontal position of the picture.
4
H-SIZE
Adjust the picture’s horizontal size.
5
V-CENTER
Adjust the vertical position of the picture.
6
V-SIZE
Adjust the picture’s vertical size.
7
ZOOM
Adjust the picture’s horizontal and vertical size
simultaneously.
8
PINCUSHION
Adjust the pincushion and barrel
9
TRAPEZOID
Adjust the picture’s trapezoid distortion.
10
PIN-BALANCE
Adjust to compensate the pincushion unbalance.
11
PARALLELOGRAM
Adjust the picture to be a rectangle.
12
ROTATION
Adjust the picture tilt to horizontal position.