IBM 7212 Model 102 User Manual

Manual is about: adds Half-High LTO Tape Drive

Summary of 7212 Model 102

  • Page 1

    Hardware announcement october 4, 2005 ibm 7212 model 102 adds half-high lto tape drive for ibm pseries and iseries overview the ibm 7212 model 102 totalstorage storage device enclosure adds the 200/400 gb half-high lto ultrium 2 tape drive feature that is: • designed to provide physical storage capa...

  • Page 2

    Description the ibm 7212 model 102 is designed to provide efficient and convenient storage expansion capabilities for selected pseries and iseries servers. The two bays of the 7212 model 102 can accommodate any two of the following for pseries and p5 servers: • dds-4 tape drive • dat72 (dds gen5) ta...

  • Page 3: Ibm Us

    Ibm us announcement supplemental information october 4, 2005 publications the following publications are shipped with the product. Additional copies are available. To order, contact your ibm representative. Order title number 7212 model 102 storage device enclosure sa41-0054 setup and operator guide...

  • Page 4

    • relative humidity: 20 to 80 percent (non-condensing), 23 ° c (73 ° f) wet bulb operating • electrical voltage: 100 to 127 or 200 to 240 v ac, 50-60 hz, autoranging • electrical power: 0.047 kva • noise level: 5.3 bels idle, 5.5 bels operating dba • leakage and starting current: 3.5 ma at 240 v ac/...

  • Page 5

    • pseries 650 (7038-6m2) through the 7311-d20 i/o drawer • 9111 • 9112-265 • 9113-550 • 9114-275 • 9117-570 • 9124-720 the drive features of the 7212 model 102 are supported for attachment to the pci-x dual channel ultra320 scsi adapter (#5710). This adapter is used in the following pseries models: ...

  • Page 6

    Cable orders pseries and p5 cables one scsi cable must be specified on the initial plant order if the single bus feature (#9207) is specified. If the split internal scsi bus feature (#1208 or #9206) is ordered, a second scsi cable must be ordered. The following table shows the various scsi cable fea...

  • Page 7

    Pseries and p5 adapters feature numbers 6203, 6205, the integrated ultra2 scsi adapter, feature number 5703, 5710, 5711, or 5712 with one 7212 model 102 per adapter port: 7212 bay-a feature 7212 bay-b feature number number 1204 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1204/9204 na 10.0 1.5 ...

  • Page 8

    Pseries and p5 adapters feature numbers 6203, 6205, the integrated ultra2 scsi adapter, feature number 5703, 5710, 5711, or 5712 with one 7212 model 102 per adapter port 7212 bay-a feature 7212 bay-b feature number number 1204 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1204/9204 na 10.0 1.5 1...

  • Page 9

    Security, auditability, and control these products use the security and auditability features of the host system and application programs. The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in applicatio...