User's guide xseries 235 type 8671.
Ibm xseries 235 type 8671 user’s guide sc25-r464-50
Note: before using this information and the product it supports, be sure to read the general information in appendix b, “warranty information,” on page 31, and appendix c, “notices,” on page 43. Third edition (february 2005) © copyright international business machines corporation 2005. All rights re...
Contents safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . V chapter 1. Introducing the ibm xseries 235 type 8671 server . . . . . . . 1 related publications . . . . . . . . . . . . . . . . . . . . . . . 1 notices and statements used in this book . . . . . . . . . . . . . . . 2 features...
Ibm statement of limited warranty z125-4753-06 8/2000 . . . . . . . . . 34 part 1 - general terms . . . . . . . . . . . . . . . . . . . . . 34 part 2 - country-unique terms . . . . . . . . . . . . . . . . . . 36 appendix c. Notices . . . . . . . . . . . . . . . . . . . . . . 43 edition notice . . . ...
Safety before installing this product, read the safety information. Antes de instalar este produto, leia as informações de segurança. Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí. Læs sikkerhedsforskrifterne, før du installerer dette produkt. Lees voordat u dit produc...
Antes de instalar este producto, lea la información de seguridad. Läs säkerhetsinformationen innan du installerar den här produkten. Statement 1 danger electrical current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: v do not connect or disconnect any cables ...
Statement 3 caution: when laser products (such as cd-roms, dvd drives, fiber optic devices, or transmitters) are installed, note the following: v do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts i...
Statement 5 caution: the power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are d...
Statement 13 danger: overloading a branch circuit is potentially a fire hazard and a shock hazard under certain conditions. To avoid these hazards, ensure that your system electrical requirements do not exceed the branch circuit protection requirements. Refer to the information that is provided with...
Statement 17 caution: the following label indicates moving parts nearby. X ibm xseries 235 type 8671: user’s guide.
Chapter 1. Introducing the ibm xseries 235 type 8671 server the ibm ® eserver xseries ® 235 type 8671 is a high-performance server. It can be upgraded to a symmetric multiprocessing (smp) server through a microprocessor upgrade. It is ideally suited for networking environments that require superior ...
V hardware maintenance manual and troubleshooting guide this publication is provided in pdf on the ibm xseries documentation cd. It contains information to help you solve the problem yourself or to provide helpful information to a service technician. V option installation guide this publication is p...
Features and specifications the table 1 provides a summary of the features and specifications for your server. Table 1. Features and specifications microprocessor: v intel ® xeon ™ , 1.8 ghz or higher depending on server model v 512 kb (minimum) level-2 cache v 400 mhz or 533 mhz front-side bus (fsb...
What your server offers the design of your server takes advantage of advancements in symmetric multiprocessing (smp), data storage, disk-array technologies, and memory management. Your server combines: v ibm x-architecture technology ibm x-architecture features leverage proven innovative ibm technol...
System-management software that is provided with your server, enables you to manage the functions of the server locally and remotely. The ismp also provides system monitoring and event recording. Note: the ismp is sometimes referred to as the service processor. The optional ibm remote supervisor ada...
V built-in, menu-driven electrically erasable programmable rom (eeprom) based setup, system configuration, redundant array of independent disks (raid) configuration, and diagnostic programs v built-in monitoring for fan, power, temperature, voltage, and power-supply redundancy v cable-presence detec...
Ibm director provides a comprehensive entry-level workgroup hardware manager. Key features include: v advanced self-management capabilities for maximum system availability v multiple operating-system platform support, including microsoft ® windows ® 98, windows nt ® , windows 2000, windows xp profes...
Server controls and indicators this section identifies the controls and indicators on the front and rear of your server. Note: the illustrations in this document might differ slightly from your hardware. Front view tower model hard disk drive activity led (green) diskette drive activity led diskette...
Diskette-drive activity led: when this led is on, it indicates that the diskette drive is in use. Hard disk drive status led: each hot-swap drive has a hard disk drive status led. When this amber led is on continuously, the drive has failed. If an optional ibm serveraid ™ controller is installed in ...
Rear view this section identifies the indicators on the rear of your server. The following illustrations contain most of these indicators. The remaining indicators are illustrated in the “working with adapters” section in the option installation guide on the ibm xseries documentation cd. Server with...
Pci-x slot attention led: this green led flashes approximately once per second when it is on. This led is visible from the rear of the server and from inside the server. The meaning of the attention led is defined by your operating system. For an illustration showing this led on the system board, se...
System-error led: this amber led is on when a system error occurs. An led on the diagnostic led panel will also be on to further isolate the error. (for more information, see the hardware maintenance manual and troubleshooting guide on the ibm xseries documentation cd.) ethernet transmit/receive act...
Complete the following steps to manually turn on the server: 1. Review the information in “safety” on page v. 2. Turn on all external devices, such as the monitor. 3. Plug the server power cords into the power source. 4. Press the power-control button on the front of the server. Note: while the serv...
Standby mode standby mode refers to the condition in which the server is connected to an ac power source but the server operating system is not running and all core logic is shut down except for the service processor. In standby mode, the server can respond to service processor requests, such as a r...
Chapter 2. Configuring your server the following configuration programs are provided with your server: v configuration/setup utility this program is part of the basic input/output system (bios) code that comes with your server. You can use this program to configure serial and parallel port assignmen...
Using the configuration/setup utility program this section provides instructions to start the configuration/setup utility program and descriptions of the available menu choices. Starting the configuration/setup utility program to start the configuration/setup utility program: 1. Turn on the server a...
V system information select this choice to display information about your server. Changes that you make on other menus might appear on this summary screen. You cannot edit any fields. The system information choice appears only on the full configuration/setup utility main menu. – product data select ...
V start options select this choice to view or change the start options. This choice appears only on the full configuration/setup utility main menu. Start options take effect when you start your server. You can select keyboard operating characteristics, such as the keyboard speed. You also can specif...
– cpu options select this choice to indicate whether the microprocessor serial number in the microprocessor is readable or to set the microprocessor cache mode to disabled, write-back, or write-through. Selecting write-back mode will provide better system performance. – pci bus control select this c...
V remote control security settings select this choice to set a remote-control password. When you set a remote-control password, you can also set the number of failed attempts to enter the correct remote-control password, and the duration before another attempt is allowed. For a list of supported opt...
Administrator password select this choice to set an administrator password. The administrator password provides access to all choices on the configuration/setup utility main menu. You can set, change, or delete both the administrator and power-on passwords and allow a power-on password to be changed...
The following sections provide the instructions needed to start the lsi logic configuration utility program and to format a scsi hard disk drive. Starting the lsi logic configuration utility program complete the following steps to start the lsi logic configuration utility program: 1. Turn on the ser...
V serveraid manager program, which configures your serveraid adapter or integrated scsi controller with raid capabilities v a system bios code update program, which updates the bios code directly from the cd v device drivers that are provided for your server model and detected hardware v operating-s...
V the serverguide program prompts you for your language, country, and keyboard layout. (this information is stored and later passed to the operating-system installation program.) v the serverguide program displays choices for running the configuration programs. For example: – the express configurati...
Typical operating-system installation you can use the serverguide program to shorten your installation time. The serverguide program provides the device drivers that are required for your hardware and for the operating system that you are installing. This section describes a typical serverguide oper...
4. If operating-system installation instructions are available for your server model, os installation is in the list in the upper-left corner of the web page. Click os installation and select the instructions for your operating system. Using serveraid manager you can use the serveraid manager progra...
Configuring the gigabit ethernet controller the ethernet controller is integrated on the system board. This controller provides an interface for connecting to 10-mbps, 100-mbps, or 1000-mbps networks and provides full duplex (fdx) capability, which enables simultaneous transmission and reception of ...
Updating the integrated system management firmware to update the integrated system management (ism) firmware for the integrated system management processor (ismp), download the integrated system management firmware update utility program for your server from the ibm support web site at http://www.Ib...
Appendix a. Getting help and technical assistance if you need help, service, or technical assistance or just want more information about ibm products, you will find a wide variety of sources available from ibm to assist you. This appendix contains information about where to go for additional informa...
You can find service information for your ibm products, including supported options, at http://www.Ibm.Com/pc/support/. If you click profile from the support page, you can create a customized support page. The support page has many sources of information and ways for you to solve problems, including...
Appendix b. Warranty information this section contains information about your warranty period and the service and support that are provided by your warranty. Warranty period the warranty period varies by machine type and country or region. Contact your place of purchase for warranty service informat...
Checking software the ibm service specialist will help you ensure that the correct bios code, firmware, device drivers, and other supporting ibm software are installed and correctly configured. It might be necessary to manually gather information about the relevant software levels or run ibm-approve...
International warranty service if you travel with your xseries or intellistation system or relocate it to a country where your system is sold and serviced by ibm or ibm resellers authorized to perform warranty service, international warranty service (iws) is available during the warranty period. Eli...
Ibm statement of limited warranty z125-4753-06 8/2000 part 1 - general terms this statement of limited warranty includes part 1 - general terms and part 2 - country-unique terms. The terms of part 2 replace or modify those of part 1. The warranties provided by ibm in this statement of limited warran...
During the warranty period, ibm or your reseller, if approved by ibm to provide warranty service, provides without charge certain types of repair and exchange service to keep machines in, or restore them to, conformance with their specifications. Ibm or your reseller will inform you of the available...
Contract or tort claim), except for any liability that cannot be waived or limited by applicable laws, ibm is liable for no more than 1. Damages for bodily injury (including death) and damage to real property and tangible personal property; and 2. The amount of any other actual direct damages, up to...
Australia the ibm warranty for machines: the following paragraph is added to this section: the warranties specified in this section are in addition to any rights you may have under the trade practices act 1974 or other similar legislation and are only limited to the extent permitted by the applicabl...
Governing law: the following replaces “laws of the country in which you acquired the machine” in the first sentence: laws of hong kong special administrative region. India limitation of liability: the following replaces items 1 and 2 of this section: 1. Liability for bodily injury (including death) ...
During the course of arbitration, this agreement will continue to be performed except for the part which the parties are disputing and which is undergoing arbitration. Europe, middle east, africa (emea) the following terms apply to all emea countries: the terms of this statement of limited warranty ...
And spain any legal claim arising out of this statement will be brought before, and finally settled by, the competent court of athens, tel aviv, milan, lisbon, and madrid, respectively. The following terms apply to the country specified: austria and germany the ibm warranty for machines: the followi...
Including all warranties implied, but without prejudice to the generality of the foregoing all warranties implied by the sale of goods act 1893 or the sale of goods and supply of services act 1980 are hereby excluded. Limitation of liability: the following replaces items one and two of the first par...
The following item is added to this paragraph: 3. Breach of ibm’s obligations implied by section 12 of the sale of goods act 1979 or section 2 of the supply of goods and services act 1982. Applicability of suppliers and resellers (unchanged). The following is added to the end of this section: ibm’s ...
Appendix c. Notices this publication was developed for products and services offered in the u.S.A. Ibm may not offer the products, services, or features discussed in this document in other countries. Consult your local ibm representative for information on the products and services currently availab...
Trademarks the following terms are trademarks of international business machines corporation in the united states, other countries, or both: active memory predictive failure analysis active pci ps/2 active pci-x serveraid alert on lan serverguide c2t interconnect serverproven chipkill techconnect et...
When referring to processor storage, real and virtual storage, or channel volume, kb stands for approximately 1000 bytes, mb stands for approximately 1 000 000 bytes, and gb stands for approximately 1 000 000 000 bytes. When referring to hard disk drive capacity or communications volume, mb stands f...
Industry canada class a emission compliance statement this class a digital apparatus complies with canadian ices-003. Avis de conformité à la réglementation d’industrie canada cet appareil numérique de la classe a est conforme à la norme nmb-003 du canada. Australia and new zealand class a statement...
Japanese voluntary control council for interference (vcci) statement power cords for your safety, ibm provides a power cord with a grounded attachment plug to use with this ibm product. To avoid electrical shock, always use the power cord and plug with a properly grounded outlet. Ibm power cords use...
Ibm power cord part number used in these countries and regions 14f0051 liechtenstein, switzerland 14f0069 chile, ethiopia, italy, libya, somalia 14f0087 israel 1838574 thailand 6952301 bahamas, barbados, bermuda, bolivia, brazil, canada, cayman islands, colombia, costa rica, dominican republic, ecua...
Index a acoustical noise emissions 3 active pci (hot-plug) components 4 activity leds cd-rom drive 9 diskette drive 9 adapter specifications 3 administrator password 21 availability features 5 b bypassing an unknown power-on password 20 c cd-rom drive activity led 9 eject button 9 specifications 3 c...
Leds (continued) hard disk drive 11 hard disk drive activity 9, 11 hard disk drive status 9 information 11 operator panel 11 post-complete 11 power-on 11 rear view 10 system error 12 system-management adapter 10 lsi logic configuration utility description 21 formatting a hard disk 22 starting 22 lsi...
V video 3 video controller 3 w web site ibm server products 1 serverguide 22 weight 3 world wide web 1 index 51.
52 ibm xseries 235 type 8671: user’s guide.
Part number: 25r4645 printed in usa sc25-r464-50 (1p) p/n: 25r4645.
