- DL manuals
- IBM
- Desktop
- PC 300PL Type 6562
- Technical Information Manual
IBM PC 300PL Type 6562 Technical Information Manual
Summary of PC 300PL Type 6562
Page 1
Ibm technical information manual pc 300pl (types 6562 and 6592).
Page 3
Ibm technical information manual pc 300pl (types 6562 and 6592).
Page 4
Note before using this information and the product it supports, be sure to read the general information under appendix e, “notices and trademarks” on page 59. First edition (august 1997) the following paragraph does not apply to the united kingdom or any country where such provisions are inconsisten...
Page 5: Contents
Contents preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V manual style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V related publications . . . . . . . . . . . . . . . ....
Page 6
Chapter 3. Adapters and internal drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 scsi adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 7
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 contents v.
Page 8: Tables
Tables 1. System resource assignments for the ide interface . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2. System resource assignments for the diskette interface . . . . . . . . . . . . . . . . . . . . . . . 11 3. System resource assignments for the parallel port . . . . . . . . . . . . . ...
Page 9: Figures
51. System memory map (fixed address ranges) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 52. System memory map (flexible address ranges) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 53. Input/output address map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 10: Preface
Preface this technical information manual provides information on the ibm pc 300pl (types 6562 and 6592). The manual, which is intended for developers who want to provide hardware and software products to operate with these computers, provides in-depth information on how the computers work. Users of...
Page 11
Related publications in addition to this manual, the following ibm publications provide information about the operation of pc 300pl computers. To order these publications, call 1-800-879-2755 in the u.S. And puerto rico. In other countries, contact an ibm reseller or ibm marketing representative. Se...
Page 12
X technical information manual.
Page 13
Chapter 1. System overview chapter 1. System overview the pc 300pl (type 6562) and (type 6592) are versatile products designed to provide state-of-the-art computing power with room for future growth. The two computers utilize the same system board. They differ in frame assembly design, power supply ...
Page 14
Chapter 1. System overview expansion – pc 300pl (type 6562): four drive bays, four expansion slots (one isa, two pci, and one shared isa/pci) – pc 300pl (type 6592): six drive bays, six expansion slots (three isa and three pci) several model variations are available for pc 300pl computers. The follo...
Page 15
Chapter 1. System overview software features this section describes the system software, device drivers, and operating system support provided with pc 300pl computers. System software system software refers to the following: basic input/output system (bios) plug and play power-on self-test (post) co...
Page 16
Chapter 1. System overview pc 300pl computers also conform to the guidelines described in the following: plug and play bios extension design guide (version 1.0) guide to integrating the plug and play bios extensions with system bios (version 1.1) plug and play kit for dos and windows post pc 300pl c...
Page 17
Chapter 1. System overview diagnostic programs a diagnostic program (qaplus/win for ibm or qaplus/pro for dos) is provided with each pc 300pl computer. The diagnostic program provided depends on the type of software preinstalled. For more information on diagnostic programs, refer to using your pc 30...
Page 18
Chapter 2. System board features chapter 2. System board features this section provides information about system board features. For an illustration of the pc 300pl system board, refer to “physical layout” on page 24. For a list of features provided with pc 300pl computers, refer to “hardware featur...
Page 19
Chapter 2. System board features l2 cache the l2 cache installed in pc 300pl computers consists of synchronous, pipeline burst, srams installed in a single bank on the system board. There is one 32k x 8 bit, 15 ns, 5 v sram tag module and two 64k x 32 bit, 8ns, 3.3 v sram modules installed. Features...
Page 20
Chapter 2. System board features pci-to-isa bridge the piix3 chipset module provides the bridge between the peripheral component interconnect (pci) and industry standard architecture (isa) buses. The chip is used to convert pci bus cycles to isa bus cycles. The pci bus is compliant with pci local bu...
Page 21
Chapter 2. System board features ide bus master interface the system board incorporates a pci-to-ide interface that complies with the at attachment interface with extensions. The intel piix3 chipset module contains the controller for the pci bus master ide interface. The piix3 module allows concurre...
Page 22
Chapter 2. System board features usb interface the intel piix3 chipset module contains the controller for the usb interface in pc 300pl computers. (refer to “chip set control” on page 6 for information on the piix3 module.) two usb ports are provided on the rear connector panel of the computers. A u...
Page 23
Chapter 2. System board features super input/output controller control of the integrated input/output (i/o) ports, diskette drive, and real-time clock is provided by the national semiconductor pc87307 chip. This chip, which is compatible with plug and play isa specification 1.0a, supports and implem...
Page 24
Chapter 2. System board features parallel port one parallel port is integrated into the system board. Support for extended capabilities port (ecp), enhanced parallel port (epp), and standard parallel port (spp) modes is provided. These modes are selected through the configuration/setup utility progr...
Page 25
Chapter 2. System board features infrared port an optional infrared port can be added to pc 300pl computers. To do this, an internal cable/connector assembly must be attached to the infrared header provided on the system board. This assembly provides a female, 9-pin, d-shell connector to be located ...
Page 26
Chapter 2. System board features general-purpose i/o ports the national semiconductor pc87307 chip on the system board has up to 16 general-purpose input/output (gpio) pins which are supported by 2 gpio ports. The port pins are used for specific functions and are not configurable by the user. The gp...
Page 27
Chapter 2. System board features audio the system board has a crystal 4236b, 16-bit, stereo audio subsystem that provides all the digital audio and analog mixing functions required for recording and playing high-quality sound from pc 300pl computers. The audio subsystem provides the following functi...
Page 28
Chapter 2. System board features video the video subsystem in pc 300pl computers consists of the following system board components: matrox mga-1164sg 3d video controller 2 mb of sgram (expandable to 4 mb sgram) upgrade connector for the vesa interface option upgrade connector for the matrox multimed...
Page 29
Chapter 2. System board features video device drivers video device drivers for the matrox mga-1164sg 3d controller are provided on the ready-to-configure cd that comes with pc 300pl computers. Instructions for installing the device drivers are provided on the ready-to-configure cd in matrox readme f...
Page 30
Chapter 2. System board features ethernet the system board of pc 300pl computers contains an intel 82557 10/100 mbit ethernet controller that provides a high-performance network connection. The ethernet controller, which is a plug and play device and a pci 2.1 bus master, features the following: iee...
Page 31
Chapter 2. System board features system management controller the system board contains a national system management chip (lm78) that monitors the computer at all times looking for potential hardware failures. The lm78 is programmed with predetermined threshold values for the following: system tempe...
Page 32
Chapter 2. System board features riser card the riser card in pc 300pl computers contains all the cable connectors for the system. The following illustrations show the physical layout of the riser card in each computer: diskette drive diskette power primary ide (back) secondary ide system front pane...
Page 33
Chapter 2. System board features isa connector, or a pci adapter installed into the pci connector. Shared slots cannot accommodate isa and pci adapters at the same time. Each pci-expansion connector is capable of driving one, low-power schottky load. Each isa-expansion connector is capable of drivin...
Page 34
Chapter 2. System board features system board switches switches are provided on the system board to allow for custom configuration. The switches, which are contained in an eight-position switch block on the system board, are rocker switches. The side of the rocker that is pushed down is the active s...
Page 35
Chapter 2. System board features switch 8 controls writes to the diskette drive. System board jumper a jumper is provided on the system board for clearing cmos memory. Refer to installing options in your pc 300pl (type 6562) and using your pc 300pl (type 6562) or installing options in your pc 300pl ...
Page 36
Chapter 2. System board features physical layout pc 300pl computers incorporate a new system board and riser card design. There are no cables on the system board; all cables are on the riser card. The system board is on a sliding mechanism so that the board can be moved in and out of the computer wi...
Page 37
Chapter 3. Adapters and internal drives chapter 3. Adapters and internal drives this chapter provides information on adapters and internal drives supported by pc 300pl computers. Adapters this section provides information on the adapters preinstalled in some pc 300pl computers, as well as cabling re...
Page 38
Chapter 3. Adapters and internal drives internal drives the ide, scsi (some models only), and diskette interfaces provide connectors for attaching internal drives. Pc 300pl computers come standard with an internal diskette drive and an internal eide or scsi hard disk drive. Some models also have an ...
Page 39: Chapter 4. Power Supply
Chapter 4. Power supply chapter 4. Power supply power requirements are supplied by a 145-watt power supply in the pc 300pl (type 6562), and a 200-watt supply in the pc 300pl (type 6592). The power supply provides 3.52-volt power for the pentium microprocessor and core chip sets, as well as 5-volt po...
Page 40
Chapter 4. Power supply power input for power input specifications, refer to table 36 on page 32. Power output the following tables show the power supply capacity per voltage for the pc 300pl (type 6562) and pc 300pl (type 6592). In the tables, amperes are designated with an a, and milliamperes with...
Page 41
Chapter 4. Power supply notes: 1. For each pci connector, the maximum power consumption is rated at 25 watts for + 5 v and + 3.52 v combined. 2. Maximum current cannot be supplied to all components at all times. System power and cooling are designed to support the statistical rms power load and typi...
Page 42
Chapter 4. Power supply output protection the power supply protects against output overcurrent, overvoltage, and short circuits. A short circuit that is placed on any dc output (between outputs or between an output and dc return) latches all dc outputs into a shutdown state, with no damage to the po...
Page 43
Chapter 5. Physical specifications chapter 5. Physical specifications the tables in this chapter list the physical specifications for pc 300pl computers. Note: the computers are electromagnetically compatible with fcc class b. Note: the maximum altitude at which the specified air temperatures apply ...
Page 44
Chapter 5. Physical specifications in the following two tables, maximum power and heat specifications are based on the maximum capacity of the power supply (145-watt maximum for type 6562 and 200-watt maximum for type 6592). Table 36. Electrical input description measurement low range 90 v ac (minim...
Page 45
Chapter 6. System compatibility chapter 6. System compatibility this chapter provides information on some of the hardware, software, and bios compatibility issues for the pc 300pl (type 6562) and (type 6592). For a list of compatible hardware and software option packages available, refer to the comp...
Page 46
Chapter 6. System compatibility hardware interrupts hardware interrupts are level-sensitive for pci interrupts and edge-sensitive for isa interrupts. The interrupt controller clears its in-service register bit when the interrupt routine sends an end of interrupt (eoi) command to the controller. The ...
Page 47
Chapter 6. System compatibility diskette drives and controller the following table shows the reading, writing, and formatting capabilities for the diskette drive type supported by pc 300pl computers. Copy protection the following methods of copy protection might not work in systems using the 3.5-inc...
Page 48
Chapter 6. System compatibility machine-sensitive programs programs can select machine-specific features, but they must first identify the machine and model type. Ibm has defined methods for uniquely determining the specific machine type. The machine model byte can be found through interrupt 15h, re...
Page 49
Appendix a. Connector pin assignments appendix a. Connector pin assignments the following tables show the pin assignments for various riser card and system board connectors. Isa bus connectors a1 b1 a31 b31 c1 d1 c18 d18 figure 4. Isa bus connector the isa bus connectors are located on the riser car...
Page 50
Appendix a. Connector pin assignments table 39 (page 2 of 2). Pin assignments for the isa bus connectors pin signal name i/o pin signal name i/o b29 + 5 v dc na a29 sa2 i/o b30 osc o a30 sa1 i/o b31 ground na a31 sa0 i/o d1 memcs16# i c1 sbhe# i/o d2 iocs16# i c2 la23 i/o d3 irq10 i c3 la22 i/o d4 i...
Page 51
Appendix a. Connector pin assignments pci bus connectors b2 a1 a2 b62 a62 b1 figure 5. Pci bus connector note: the pci bus connectors are located on the riser card. Table 40 (page 1 of 2). Pin assignments for the pci bus connectors pin signal name i/o pin signal name i/o a1 trst# o b1 − 12 v dc na a...
Page 52
Appendix a. Connector pin assignments table 40 (page 2 of 2). Pin assignments for the pci bus connectors pin signal name i/o pin signal name i/o a34 frame# i/o b34 ground na a35 ground na b35 irdy# i/o a36 trdy# i/o b36 + 3.52 v dc na a37 ground na b37 devsel# i/o a38 stop# i/o b38 ground na a39 + 3...
Page 53
Appendix a. Connector pin assignments ide connectors 1 2 40 39 figure 6. Ide connector the ide connectors are 40-pin, shrouded berg strips located on the riser card. Table 41. Pin assignments for the ide connectors pin signal name i/o pin signal name i/o 1 reset o 2 ground na 3 d7 i/o 4 d8 i/o 5 d6 ...
Page 54
Appendix a. Connector pin assignments diskette drive connector 1 2 34 33 figure 7. Diskette drive connector the diskette drive connector is a 34-pin, shrouded berg strip located on the riser card. Table 42. Pin assignments for the diskette drive connector pin signal name i/o pin signal name i/o 1 dr...
Page 55
Appendix a. Connector pin assignments system memory connectors 1 85 84 168 figure 8. System memory (dimm) connector each dimm connector is a 168-pin, gold-lead, unbuffered, 3.3 v, sdram connector. Table 43 (page 1 of 3). Pin assignments for the dimm connectors pin signal name i/o pin signal name i/o...
Page 56
Appendix a. Connector pin assignments table 43 (page 2 of 3). Pin assignments for the dimm connectors pin signal name i/o pin signal name i/o 34 a2 o 118 a3 o 35 a4 o 119 a5 o 36 a6 o 120 a7 o 37 a8 o 121 a9 o 38 a10 o 122 a11 o 39 nc o 123 nc o 40 vcc na 124 vcc na 41 vcc na 125 nc na 42 nc na 126 ...
Page 57
Appendix a. Connector pin assignments notes: 1. Du = don't use 2. Nc = not connected table 43 (page 3 of 3). Pin assignments for the dimm connectors pin signal name i/o pin signal name i/o 77 dq31 i/o 161 dq63 i/o 78 ground na 162 ground na 79 nc i/o 163 nc na 80 nc i/o 164 nc na 81 nc i/o 165 sa0 i...
Page 58
Appendix a. Connector pin assignments usb connectors 4 3 2 1 figure 9. Usb connector the external interface for the usb ports consists of two, 4-pin connectors. Parallel port connector 13 1 25 14 figure 10. Parallel port connector the external interface for the parallel port is a 25-pin, female, d-s...
Page 59
Appendix a. Connector pin assignments serial port connectors 1 5 6 9 figure 11. Serial port connector the external interface for the serial ports consists of two, 9-pin, male, d-shell connectors (in a stacked configuration). Infrared port connector (optional) 1 5 6 9 figure 12. Infrared port connect...
Page 60
Appendix a. Connector pin assignments keyboard and mouse port connectors 6 4 2 1 3 5 figure 13. Keyboard and mouse port connector the keyboard and mouse ports each have a 6-pin, mini-din external connector. Monitor port connector 5 1 10 6 15 11 figure 14. Monitor connector the external interface for...
Page 61
Appendix a. Connector pin assignments ethernet connector 2 1 8 7 figure 15. Ethernet connector the external interface for the ethernet port is an 8-pin, rj-45 connector. Table 50. Pin assignments for the ethernet connector pin signal name i/o 1 txd + o 2 txd − o 3 rxd + i 4 ground na 5 ground na 6 r...
Page 62
Appendix b. System address maps appendix b. System address maps system memory map memory can be mapped differently if post detects an error. Table 51. System memory map (fixed address ranges) address range (dec) address range (hex) size description 0–511 kb 00000–7ffff 512 kb conventional 512 kb–638...
Page 63
Appendix b. System address maps input/output address map the following table lists resource assignments for the i/o address map. Any addresses that are not shown are reserved. Table 53 (page 1 of 2). Input/output address map address (hex) size (dec) description 0000–001f 32 bytes dma 1 0020–002d 003...
Page 64
Appendix b. System address maps table 53 (page 2 of 2). Input/output address map address (hex) size (dec) description 0378–037f 8 bytes lpt2 03b4–03b7 03ba 5 bytes matrox mga-1164sg 3d video 03bc–03be 4 bytes lpt1 (system board) 03c0–03cf 03d4–03d7 03da 20 bytes matrox mga-1164sg 3d video 03e8–03ef ...
Page 65
Appendix b. System address maps dma i/o address map the following table lists resource assignments for the dma address map. Any addresses that are not shown are reserved. Table 54 (page 1 of 2). Dma i/o addresses address (hex) description bits byte pointer 0000 channel 0, memory address register 00–...
Page 66
Appendix b. System address maps table 54 (page 2 of 2). Dma i/o addresses address (hex) description bits byte pointer 00d6 channels 4–7, mode register (write) 00–07 00d8 channels 4–7, clear byte pointer (write) na 00da channels 4–7, master clear (write)/temp (read) 00–07 00dc channels 4–7, clear mas...
Page 67
Appendix c. Irq and dma channel assignments appendix c. Irq and dma channel assignments the following tables list the irq (interrupt request) and dma (direct memory access) channel assignments for pc 300pl computers. Note: audio irq and dma resources are required and are assigned by the plug and pla...
Page 68: Appendix D. Error Codes
Appendix d. Error codes appendix d. Error codes the following tables list the post error codes and beep error codes for the pc 300pl (type 6562) and pc 300pl (type 6592). Post error codes post error messages appear when post finds problems with the hardware during power-on or when a change in the ha...
Page 69
Appendix d. Error codes table 57 (page 2 of 2). Post error codes code description 201 memory data error 202 memory address line error 00-15 203 memory address line error 16-23 221 rom to ram remapping error 225 unsupported memory type installed or memory pair mismatch 301 keyboard error 302 keyboard...
Page 70
Appendix d. Error codes beep codes for the following beep codes, the numbers indicate the sequence and number of beeps. For example, a “2-3-2” error symptom (a burst of two beeps, three beeps, then two beeps) indicates a memory module problem. An x in an error message can represent any number. Table...
Page 71
Appendix e. Notices and trademarks appendix e. Notices and trademarks references in this publication to ibm products, programs, or services do not imply that ibm intends to make these available in all countries in which ibm operates. Any reference to an ibm product, program, or service is not intend...
Page 72: References
References general sources advanced power management (apm) bios interface specification 1.2 source: intel corporation at attachment interface with extensions source: american national standard of accredited standards committee extended capabilities port: specification kit source: microsoft corporati...
Page 73: Index
Index index a adapters scsi 25 supported 25 video 17 wake on lan 22, 25 address map dma 53 i/o 51 system memory 50 advanced power management 4 altitude 31 apm 4 audio features 15 jacks 15 b battery 14 beep codes 58 bios bypassing 35 data areas 50 features 3 updates 4 bus ide 9 isa 8, 20 pci 8, 20 un...
Page 74
Index ethernet enable/disable switch 22 features 18 port 18, 49 expansion 20 f fault, overvoltage 30 features hardware 1 operating system support 5 software 3 flash update 4 floppy devices 11, 26, 35 frequency, input power 27, 32 g gpio ports 14 h hard disk drive characteristics 26 compatibility 35 ...
Page 75
Index pin assignments (continued) isa connectors 37 keyboard/mouse connectors 48 monitor connector 48 parallel port connector 46 pci connectors 39 serial port connectors 47 system memory (dimm) 43 usb connectors 46 video connector 48 plug and play 3 polling mechanism 35 ports audio 15 ethernet 18, 4...
Page 76
Index voltage input power 28 output power 28 w wake on lan adapters 22, 25 controller 18 warning, reserved areas viii weight, system unit 31 width, system unit 31 write current, diskette 35 write-protect switch, diskette drive 23 64 technical information manual.
Page 78
Ibm part number: xxxxxxx printed in u.S.A. Xxxxxxx.