1. DL manuals
  2. IBM
  3. Network Router
  4. SAN04M-R
  5. Installation And Service Manual

IBM SAN04M-R Installation And Service Manual - Ordering Manuals

Manual is about: TotalStorage SAN Router

Summary of SAN04M-R

  • Page 1

    Ibm totalstorage san04m-r san router installation and service manual service information: 2027 / r04 gc26-7764-02 read before using this product contains software that is licensed under written license agreements. Your use of such software is subject to the license agreements under which they are pr...

  • Page 3

    Ibm totalstorage san04m-r san router installation and service manual service information: 2027 / r04 gc26-7764-02.

  • Page 4

    Third edition (february 2007) © copyright international business machines corporation 2005, 2007. All rights reserved. Us government users restricted rights – use, duplication or disclosure restricted by gsa adp schedule contract with ibm corp..

  • Page 5: Contents

    © copyright ibm corp. 2007 iii contents preface ..............................................................................................................................Xi who should use this manual.............................................................Xi related publications ...............

  • Page 6

    San04m-r san router installation and service manual iv set the ip address for the network management port using cli ..................................... 20 task 7: initiating the element manager ......................................... 21 before you connect the san router to the network .............

  • Page 7

    V contents fru list ................................................................................................50 miscellaneous parts ...........................................................................51 power cords and receptacles ..........................................................

  • Page 8

    San04m-r san router installation and service manual vi.

  • Page 9: Tables

    © copyright ibm corp. 2007 vii tables 1 ibm products and san management documentation-e/osi ................. Xii 2 san router features ........................................................................................ 5 3 element manager software functions .......................................

  • Page 10

    San04m-r san router installation and service manual viii.

  • Page 11: Figures

    © copyright ibm corp. 2007 ix figures 1 san router, front view ................................................................................... 2 2 power connections and leds ....................................................................... 16 3 management port to management terminal connec...

  • Page 12

    San04m-r san router installation and service manual x.

  • Page 13: Preface

    © copyright ibm corp. 2007 xi preface this manual provides the information required to install and prepare the ibm totalstorage san04m-r for configuration to operate with e/osi in an ethernet/ip or fibre channel (fc) data network. Who should use this manual this publication is intended for trained s...

  • Page 14: Ordering Manuals

    San04m-r san router installation and service manual xii table 1 ibm products and san management documentation-e/osi ibm totalstorage product name, and machine type and model mcdata product name related firmware and san management product relevant documentation san16m-r san router • 2027-r16 eclipse ...

  • Page 15: How to Send Your Comments

    Xiii preface how to send your comments your feedback is important in helping us provide the most accurate and high-quality information. If you have comments or suggestions for improving this document, you can send us comments electronically by using the following addresses: • internet: starpubs@us.I...

  • Page 16

    San04m-r san router installation and service manual xiv (g229-9054) publication, which is on the cd-rom that accompanies this product. The following notices and statements are used in this document. They are listed below in order of increasing severity of potential hazards. Follow the links for more...

  • Page 17

    Xv preface danger if the receptacle has a metal shell, do not touch the shell until you have completed the voltage and grounding checks. Improper wiring or grounding could place dangerous voltage on the metal shell. If any of the conditions are not as described, stop. Ensure the improper voltage or ...

  • Page 18

    San04m-r san router installation and service manual xvi • disconnect the attached power cords, telecommunications systems, networks, and modems before you open the device covers, unless instructed otherwise in the installation and configuration procedures. • connect and disconnect cables as describe...

  • Page 19

    Xvii preface danger rack-mounted devices are not to be used as a shelf or work space. (l002) danger multiple power cords (l003) to remove all power to the device, disconnect all power cords. Caution notices a caution notice calls attention to a situation that is potentially hazardous to people becau...

  • Page 20

    San04m-r san router installation and service manual xviii caution only trained service personnel may replace this battery. The battery contains lithium. To avoid possible explosion, do not burn or charge the battery. Do not: __ throw or immerse into water __ heat to more than 100°c (212°f) __ repair...

  • Page 21

    Xix preface caution the doors and covers to the product are to be closed at all times except for service by trained service personnel. All covers must be replaced and doors locked at the conclusion of the service operation. (c013) caution the system contains circuit cards and/or assemblies that cont...

  • Page 22

    San04m-r san router installation and service manual xx accompany an attention notice, but is not required. A sample attention notice follows: attention ! Do not bend a fibre cable to a radius less than 5 cm (2 in.); you can damage the cable. Tie wraps are not recommended for optical cables because t...

  • Page 23

    Xxi preface recycling offerings can be found on ibm’s internet site at http://www.Ibm.Com/ibm/environment/products/prp.Shtml note: this mark applies only to countries within the european union (eu) and norway. Appliances are labeled in accordance with european directive 2002/96/ec concerning waste e...

  • Page 24

    San04m-r san router installation and service manual xxii above, must not dispose of end of life eee as unsorted municipal waste, but use the collection framework available to customers for the return, recycling and recovery of weee. Customer participation is important to minimize any potential effec...

  • Page 25: Chapter 1:  Overview

    © copyright ibm corp. 2007 1 chapter 1: overview use the links below to access the major topics in this chapter. Introduction ibm offers a family of fibre channel switching products that allow implementation of a storage area network (san) topology in fibre channel protocol (fcp) or fibre connection...

  • Page 26

    San04m-r san router installation and service manual 2 • compression for increased bandwidth. • support for full fabric, private, and public loop fc devices. • patent-pending fast write tm technology for maximizing throughput across long distances. The san router is shown in figure 1, san router, fro...

  • Page 27

    3 chapter 1: overview san router physical description all ports and connectors are located on the front of the san router, as described in the following paragraphs. The rear of the san router contains only cooling fans, which are not accessible. There are no field replaceable units (frus), except fo...

  • Page 28

    San04m-r san router installation and service manual 4 fibre channel ports there are two user-configurable fibre channel ports located on the front of the san router and labeled 1 and 2. (see 2 and 3 in figure 1 .) these port connections accommodate standard fibre channel transceivers and sfp connect...

  • Page 29

    Table 2 san router features feature description intelligent ports two intelligent ports, which can be configured for internet small computer systems interface (iscsi) or internet fibre channel protocol (ifcp). Internet fibre channel protocol (ifcp) standards track protocols the san router supports t...

  • Page 30: Element Manager Overview

    San04m-r san router installation and service manual 6 element manager overview the san router element manager, a web-based java applet, is used to configure, monitor, and troubleshoot the san router. The element manager software configuration and monitoring functions are listed in table 3, element m...

  • Page 31

    7 chapter 1: overview to login to the san router and launch element manager, you must first install and prepare the san router for out-of-band management, as described in this chapter. See the administration and configuration manual for the login and launch procedure. San router operations system lo...

  • Page 32: Software Requirements

    San04m-r san router installation and service manual 8 software requirements table 4 sanvergence manager and element manager platform requirement ibm compatible intel pentium class pc, 400 mhz or above with mouse, 32-bit sun ultra 5 or better; 300 mhz or above, with mouse operating system windows ser...

  • Page 33

    9 chapter 1: overview before installing the san router this section describes the materials and tools required for installing the san router, the contents of the shipping carton, and safety precautions to observe during installation. Required tools and materials before beginning the installation tas...

  • Page 34

    San04m-r san router installation and service manual 10 -within the united states and canada, contact the ibm quality hotline toll-free 1-800-442-6773 -in other locations, direct dial: 770-858-8459. The rack mount kit is shipped separately from the router. Working with sfps attention! Small form fact...

  • Page 35: Installing The San Router

    © copyright ibm corp. 2007 11 chapter 2: installing and connecting the san router use the links below to access the major topics in this chapter. Section page installing the san router 11 ip address management 24 sfp connectors and cables 25 cable specifications 26 cable guidelines 27 management por...

  • Page 36

    San04m-r san router installation and service manual 12 task 1: verifying installation requirements verify the following requirements are met prior to installing the san router. Ensure that a site plan is prepared, configuration planning tasks are complete, planning considerations are evaluated, and ...

  • Page 37

    13 chapter 2: installing and connecting the san router • hba vendor, model, driver version, topology setting (pt-pt, loop, etc.). Fc/iscsi target information: • fc target/array model, firmware version, drive details. • scsi bridge vendor, model, (crossroads, etc.) and scsi device details. Fc sub-fab...

  • Page 38

    San04m-r san router installation and service manual 14 — have the circuit provider test the link to ensure that the full provisioned amount is available and that the signal strength is not degraded somewhere on the network. — verify the available mtu (maximum transfer unit) available on this network...

  • Page 39

    15 chapter 2: installing and connecting the san router the san router has no power switch and will power up when it is connected to a live power source. Either power supply can maintain power for the san router; however, we recommend connecting both power supplies, each to a separate power source, f...

  • Page 40

    I04mr002 2 3 4 1 san04m-r san router installation and service manual 16 figure 2 power connections and leds location description 1 power 1 connector 2 power status 1 3 power status 2 4 power 2 connector task 4: preparing to configure the san router change the management port ip address using the fol...

  • Page 41

    17 chapter 2: installing and connecting the san router refer to table 6 for the default setting for the management port ip address, which is the only ip address that must be changed using cli to provide access for out-of-band management. All other default setting can be changed using the element man...

  • Page 42: Rs-232 Management Port

    San04m-r san router installation and service manual 18 task 5: connecting the vt100 or emulation terminal to the rs-232 management port to connect the terminal: 1. Use a null modem cable to connect a vt100 terminal or any standard pc running terminal emulation software to the rs-232 serial port on t...

  • Page 43

    I04mr003 1 2 19 chapter 2: installing and connecting the san router figure 3 management port to management terminal connection location description 1 connect null modem cable here. Connect other end to vt100 or emulation terminal. Set the 10/100 ethernet out-of-band management address from here. (th...

  • Page 44

    San04m-r san router installation and service manual 20 ensure that the vt100 arrow emulation feature is on. Task 6: preparing the san router for element manager access set the ip address for the network management port using cli the san router has an inband ip address and a 10/100 management port ip...

  • Page 45

    21 chapter 2: installing and connecting the san router subnet mask = subnet mask of the management port (optional) 4. Set a permanent route to the network management station. • at the command prompt enter: set mgmt permroute where: address = ip address of the network management subnet. This ip addre...

  • Page 46

    San04m-r san router installation and service manual 22 2. Ping the ip address you entered in task 6 to verify network connectivity using the network management host. • if there is no ping response, contact your network administrator to set up connectivity between the network management station and t...

  • Page 47

    I04mr004 1 2 1 3 14 23 chapter 2: installing and connecting the san router figure 4 intelligent ports location description 1 port 3 sfp 2 port 3 rj45 3 port 4 sfp 4 port 4 rj45 task 9: connecting fibre channel ports fibre channel port connections these ports are the 1 gbps sfp ports labeled ports 1 ...

  • Page 48: Ip Address Management

    San04m-r san router installation and service manual 24 — nas device host port. • targets/storage. — fc jbod ports. — fc storage array ports. — fc tape drive/ library ports. • fc switches — fc switche_ports. — scsi to fc bridge devices. I04mr005 figure 5 fibre channel ports task 10: configure and ena...

  • Page 49: Sfp Connectors and Cables

    External network (ifcp/iscsi) tcp port tcp port internal ip address router inband ip address ge port internal ip address ifcp/iscsi ip address ifcp/iscsi ip address internal network (may contain other mcdata switches) san router i2640026 25 chapter 2: installing and connecting the san router figure ...

  • Page 50: Cable Specifications

    San04m-r san router installation and service manual 26 support both gigabit ethernet (ge) and fibre channel (fc) transceivers. The san router is shipped with four sfp transceivers for multi-mode fibre (mmf) connectivity. Mmf fibre supports transmission lengths up to 550 m. The provided sfps are comp...

  • Page 51: Cable Guidelines

    Table 11 compatible cable types type of cable range sfp type 62.5 um multi-mode fiber optic fc/ge 2-300 m short wave laser 50 um multi-mode fiber optic fc/ge 2-500 m short wave laser 9 um single mode fiber optic 2-10 km long wave laser copper 0-30 m (equalized cable) 0-10 m (unequalized cable) coppe...

  • Page 52: Management Port Pinouts

    San04m-r san router installation and service manual 28 management port pinouts the san router has two management port connectors, an rs-232 serial connector, and an rj45 connector. Serial port pinout figure 7, serial port pinout and table 12, serial port pinout definitions describe the serial port p...

  • Page 53: Installing An Sfp Device

    29 chapter 2: installing and connecting the san router rj45 port pinout figure 8, rj45 pinout and table 13, rj45 pinout description describe the rj45 and 100/1000 ethernet pinouts for the san router. 2 1 3 4 5 6 7 8 i2640009 figure 8 rj45 pinout table 13 rj45 pinout description pin number signal com...

  • Page 54

    San04m-r san router installation and service manual 30 to connect an sfp device, follow these steps: 1. Insert the sfp through the port cover into the connector until the connector is firmly connected to the sfp. You should hear an audible click as it snaps into place. 2. Remove the protective plugs...

  • Page 55

    31 chapter 2: installing and connecting the san router san router firmware default values if you need to restore the default values in the firmware, review table 14 as the table lists all default values and how you can change or view the default values from element manager or sanvergence manager. . ...

  • Page 56

    San04m-r san router installation and service manual 32 general multi-function port type fibre channel configuration>port>fc/ethernet port speed auto configuration>port>fc/ethernet port state enabled configuration>port>fc/ethernet port parameters fc-auto configuration>port>fc/ethernet advanced edtov ...

  • Page 57

    33 chapter 2: installing and connecting the san router mtu size auto configuration>port>fc/ethernet>advanced iscsi parameters selective acknowledgement disabled configuration>port>fc/ethernet>advanced large pdu enabled configuration>port>fc/ethernet>advanced initial r2t enabled configuration>port>fc...

  • Page 58

    San04m-r san router installation and service manual 34 ip address 0.0.0.0 configuration>iscsi>radius server configuration udp port 1812 configuration>iscsi>radius server configuration timeout (in secs) 1 configuration>iscsi>radius server configuration retries 1 configuration>iscsi>radius server conf...

  • Page 59

    35 chapter 2: installing and connecting the san router note: if the san router is shipped pre-installed in a cabinet, the default ip address is set during the cabinet configuration process to 10.Xx.Yy.Zz where: xx is the cabinet number, yy is the product type identifier, which for the san router is ...

  • Page 60

    San04m-r san router installation and service manual 36.

  • Page 61: Downloading Firmware

    © copyright ibm corp. 2007 37 chapter 3: maintenance and troubleshooting use the links below to access the major topics in this chapter. Downloading firmware section page downloading firmware 37 troubleshooting 40 leds on the san router 41 you can use the cli or element manager to download and insta...

  • Page 62

    San04m-r san router installation and service manual 38 note: the tftp server daemon is not part of the base windows operating system; this service is part of the remote installation services (ris) package that is available in the operating installation disk. Follow these steps: 1. Install the remote...

  • Page 63

    39 chapter 3: maintenance and troubleshooting 4. Click download.When you download a new version, it is always saved in the inactive location. I2640010 figure 9 firmware upgrade dialog box activate new firmware to activate the new firmware: 1. Click activate. The activate boot location dialog display...

  • Page 64: Troubleshooting

    San04m-r san router installation and service manual 40 8. Close and restart the web browser to load the element manager from the new version. After resetting the san router, it may take two or three minutes for the san router’s embedded web browser to become ready. Restore prior firmware version to ...

  • Page 65: Leds On The San Router

    41 chapter 3: maintenance and troubleshooting • for general troubleshooting, review troubleshooting resources on page 42 for a list of software applications you can use. • other troubleshooting aids include: retrieving the system log on page 42 and accessing snmp alerts or alarms on page 43. These a...

  • Page 66: Troubleshooting Resources

    San04m-r san router installation and service manual 42 troubleshooting resources the key resources which should be used in the troubleshooting process are listed below. Sanvergence manager the sanvergence manager provides the following tools which can used in the troubleshooting process: • configura...

  • Page 67

    43 chapter 3: maintenance and troubleshooting cleared out from time to time, so it is important to remember that the log may not include every error. To upload the system log from the san router to the management workstation, follow these instructions: 1. Select file>system log>retrieve to display t...

  • Page 68

    San04m-r san router installation and service manual 44 review table 17 for a list of snmp alerts or alarms that are useful in resolving hardware errors (this is not a complete list, review the administration and configuration manual for a complete list of all snmp alerts):.

  • Page 69

    45 chapter 3: maintenance and troubleshooting table 17 snmp alerts or alarm definitions alert or alarm name description cold start the san router is powered on, or rebooted. Informational only message, no action required. Link down a ge interface loses an active link signal. Link up a ge interface a...

  • Page 70

    I2640012 san04m-r san router installation and service manual 46 figure 11 power supply alert shown in trap viewer cleaning fiber-optic components perform this procedure as directed in this publication and when connecting or disconnecting fiber-optic cables from port optical transceivers (if necessar...

  • Page 71

    1 2 i12m1072 47 chapter 3: maintenance and troubleshooting figure 12 clean fiber-optic components 3. Gently wipe the end-face and other surfaces of the connector with an alcohol pad as shown in part 2 of figure 12 . Ensure the pad makes full contact with the surface to be cleaned. Wait approximately...

  • Page 72

    San04m-r san router installation and service manual 48.

  • Page 73: Chapter 4:  Parts Catalog

    © copyright ibm corp. 2007 49 chapter 4: parts catalog use the links below to access the major topics in this chapter. Parts catalog section page parts catalog 49 fru list 50 miscellaneous parts 51 power cords and receptacles 52 this chapter provides an illustrated parts breakdown or part numbers fo...

  • Page 74: Fru List

    San04m-r san router installation and service manual 50 rohs compliant parts and any replacement part must be rohs compliant. Fru list table 18 lists base unit part number and description. There are only two frus, the optics and the base assembly. Table 18 non-rohs part number rohs part number descri...

  • Page 75: Miscellaneous Parts

    51 chapter 4: parts catalog miscellaneous parts figure 13 illustrates miscellaneous parts. Table 19 is the associated parts list. The table includes reference numbers to figure 13 , part numbers, descriptions, and quantities. 1 2 3 i12m1082 figure 13 miscellaneous parts table 19 miscellaneous parts ...

  • Page 76: Power Cords and Receptacles

    San04m-r san router installation and service manual 52 power cords and receptacles figure 14 illustrates optional power cords, receptacles, and associated parts list. The table includes reference numbers to figure 14 , feature numbers, and descriptions. 1 2 3 4 5 6 7, 11,15 9 10 8 12, 13,14 16 i12m1...

  • Page 77

    53 chapter 4: parts catalog table 20 power cord part number list ref. Part number description 1 reference only power cord, ac, north america nema 5-15p straight, 125 volts, 10 amps, 3.0 meters receptacle: nema 5-15r 2 reference only power cord, ac, united kingdom bs 1363 right angle, 250 volts, 10 a...

  • Page 78

    San04m-r san router installation and service manual 54 12 reference only power cord, ac, united states (chicago) nema l6-15p straight, twist-lock, 250 volts, 10 amps, 1.8 meters receptacle: nema l6-15r 13 reference only power cord, ac, north america nema l6-15p straight, twist-lock, 250 volts, 10 am...

  • Page 79: Procedural Notes

    © copyright ibm corp. 2007 55 chapter 5: removal and replacement procedures use the links below to access the major topics in this chapter. Procedural notes before removing a small form factor pluggable (sfp) optical transceiver, read this: 1. Before removing the fru, read the removal and replacemen...

  • Page 80

    San04m-r san router installation and service manual 56 • loopback plug connector (provided with the router). • fiber-optic cleaning kit. Removal to remove an sfp optical transceiver: 1. Notify the customer that the port with the defective transceiver will be blocked. Ensure the customer’s system adm...

  • Page 81

    57 chapter 5: removal and replacement procedures 7. Review in either element manager or sanvergence manager to verify the error has been corrected. Replacement to replace an sfp optical transceiver: 1. Remove the replacement transceiver from its packaging. 2. Insert the transceiver into the port rec...

  • Page 82

    San04m-r san router installation and service manual 58.

  • Page 83: Appendix A:  Specifications

    © copyright ibm corp. 2007 59 appendix a: specifications use the links below to access the major topics in this appendix. Section page port characteristics 59 size and weight 59 power requirements 59 power consumption 60 environmental requirements 60 small form factor pluggable 60 port characteristi...

  • Page 84: Power Consumption

    San04m-r san router installation and service manual 60 maximum input current, 1.8 amps ac. Power consumption redundant dual power supplies,125 watts maximum power each. Environmental requirements temperature: 5° to 40° c (41° to 104° f) humidity: 20% to 85% non-condensing small form factor pluggable...

  • Page 85: Notices

    © copyright ibm corp. 2007 61 notices this information was developed for products and services offered in the u. S. A. Ibm may not offer the products, services, or features discussed in this document in other countries. Consult your local ibm representative for information on the products and servic...

  • Page 86

    San04m-r san router installation and service manual 62 this information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Ibm may make improvements and/or chang...

  • Page 87: Trademarks

    63 trademarks the following terms are trademarks of the international business machines corporation in the united states, other countries, or both: ibm, escon, eserver, ficon. Mcdata, efc manager, efcm, eclipse, openready, sanpilot, sanvergence, santegrity, enterprise operating system, e/os, e/osi, ...

  • Page 88

    San04m-r san router installation and service manual 64 human access to laser radiation above a class 1 level during normal operation or prescribed maintenance conditions. Federal communications commission (fcc) class a statement note: this equipment has been tested and found to comply with the limit...

  • Page 89

    65 en 55022. The limits for class a equipment were derived for commercial and industrial environments to provide reasonable protection against interference with licensed communication equipment. Attention: this is a class a product. In a domestic environment this product may cause radio interference...

  • Page 90

    San04m-r san router installation and service manual 66 people’s republic of china class a electronic emission statement korean class a electronic emission statement japan vcci class a ite electronic emission statement.

  • Page 91: Index

    © copyright ibm corp. 2007 67 a appendix a 26 c cable specifications 26 cfr, laser compliance 63 class 1 laser products 63 clean fiber-optic components 46 code of federal regulations laser compliance 63 compatible connectors sfp 60 configuration procedures where to find 6 copper cables 27 e element ...

  • Page 92

    San04m-r san router installation and service manual 68 specifications 14 power supply specifications 60 procedural notes 55 r remove and replace procedures 55 repair procedures clean fiber-optic components 46 s safety general precautions xiii laser compliance 63 san router illustration of 2 operatio...

  • Page 93: Readers’

    Readers’ comments — we’d like to hear from you ibm totalstorage san04m-r san router installation and service manual service information: 2027 / r04 publication no. Gc26-7764-02 we appreciate your comments about this publication. Please comment on specific errors or omissions, accuracy, organization,...

  • Page 94: Business

    Readers’ comments — we’d like to hear from you gc26-7764-02 gc26-7764-02 cut or fold along line cut or fold along line fold and tape please do not staple fold and tape fold and tape please do not staple fold and tape no postage necessary if mailed in the united states business reply mail first-class...

  • Page 96

    Printed in usa gc26-7764-02.