Ibm storwize v7000 unified model 2073-720 quick start guide gi13-2867-00
Ibm ® storwize v7000 unified model 2073-720 quick start guide total installation and configuration time takes approximately 3 hours. Here are the installation and configuration steps covered: 1. Prepare system configuration files and place on a usb flash drive 2. Collect and record required infrastr...
Collect and record the following required infrastructure information v ntp server/s ip address (windows ntp servers are not supported) v dns servers ip address v public network subnets (subnets used for nas traffic, example: 99.99.99.0/24) v public network ip addresses (ip used by clients to connect...
Connecting the cables from the control enclosure to the expansion units (total time 20 minutes) if you have expansion enclosures then connect them as shown. Cabling diagram connecting the control enclosure to one or more expansion units. Cautio n cau tio n caut io n caut i o n disconnect all supply ...
Configure the storwize v7000 unified software, nas file storage (total time 40 minutes) 1. Select nas file services , enter ntp and dns information. 2. Select a user authentication method, consult the information center to choose an appropriate authentication method, if unsure choose local authentic...
Create a new nas file system and create a nas share note: the following section requires an ssh client, an example of this is putty for windows. Create a nas file system by sshing to the storwize v7000 unified management ip using port 22. Log in with user id admin v choose a storage pool to locate t...
6 ibm storwize v7000 unified: model 2073-720 quick start guide.
Part number: 00ar299 printed in usa gi13-2867-00 (1p) p/n: 00ar299.
