IBM TOTAL STORAGE NAS 100 Quick Start Instructions

Summary of TOTAL STORAGE NAS 100

  • Page 1

    Ibm totalstorage nas 100 quick start instructions.

  • Page 3

    Ibm totalstorage nas 100 quick start instructions.

  • Page 4

    First edition (august 2002) © copyright international business machines corporation 2002. All rights reserved. Us government users restricted rights – use, duplication or disclosure restricted by gsa adp schedule contract with ibm corp..

  • Page 5: Ibm Totalstorage

    Ibm totalstorage ™ nas 100 quick start instructions step 1: read this first caution: — safety information always power off the nas 100 before removing the top cover. Use safe practices when lifting this product. Do not place any objects on top of the appliance. Notes: 1. The latest release notes are...

  • Page 6

    V one set of documentation including: caution: safety information – read this first, ibm totalstorage nas 100 hardware installation and service guide, quick start instructions and product and documentation cds. V four mounting brackets items you provide v one cat 5+ copper cable with connection inst...

  • Page 7

    A. Slide the bracket, rubber-foot side down, onto the side of the chassis and to the left of the bracket cutouts until the bracket fits snugly against the appliance. B. Slide the bracket to the right until the bracket clicks into the cutouts on the side of the chassis. 3. Repeat for the three other ...

  • Page 8

    Step 4: attach cables 1. Connect the appliance to your network by plugging the network cable to the appropriate ethernet port and then into your network. Symbol ethernet port system uses 1 lan 1 dhcp 2 lan 2 static ip 2. Connect the power cable to the receptacle on the back of the appliance and then...

  • Page 9

    Note: if you are using static ip (lan 2), the warning led will blink, indicating that the system has booted using 192.168.0.1, the factory default ip address. It will continue to blink until a different ip address is configured. If your system uses dhcp (lan 1) and the warning led blinks, the applia...

  • Page 10

    Note: two situations can prevent your dhcp system from finding the host name: v the dhcp server is on a different subnetwork than the appliance v the dns server has appended a suffix, such as .Com to the host name if this happens, use the static ip address. 2. Log on to the web gui using the followi...

  • Page 11: Trademarks

    Trademarks the following terms and logo are trademarks of international business machines corporation or tivoli systems inc. In the united states or other countries or both: ibm ibm logo totalstorage microsoft, windows, and windows nt are trademarks or registered trademarks of microsoft corporation....

  • Page 12

    8 nas 100 quick start instructions.

  • Page 14

    Part number: 55p4034 printed in u.S.A. (1p) p/n: 55p4034.