Ib828 amd athlon™ 64 / athlon™ 64 x2 (dual core) / sempron™ embedded board user’s manual version 1.0
Ii ib828 user’s manual acknowledgments award is a registered trademark of award software international, inc. Ps/2 is a trademark of international business machines corporation. Amd athlon ™ 64 / athlon™ 64 x2 (dual core) / sempron™ processors are registered trademarks of amd corporation. Microsoft w...
Ib828 user’s manual iii table of contents introduction ....................................................... 1 product description ..................................................................... 1 checklist ........................................................................................
Iv ib828 user’s manual this page is intentionally left blank..
Introduction ib828 user’s manual 1 introduction product description the ib828 embedded board incorporates the high performance amd 780e embedded pc chipset optimized for amd socket am2 processors with speeds up to 2.9ghz and with fsb up to 2000mhz. The board has two ddr ii sodimm sockets to support ...
Introduction 2 ib828 user’s manual checklist your ib828 package should include the items listed below. The ib828 embedded board this user‟s manual 1 cd containing chipset drivers and flash memory utility.
Introduction ib828 user’s manual 3 ib828 specifications cpu type amd socket am2+/am3 ; pga 940-pins (supporting 45w cpus only) system speed 800~1600 mhz (hyper transport) cpu fsb 1.0 ~ 2.6ghz cache 512~2048 kb l2 cache green /apm apm1.2 bios award bios: supports acpi function chipset north bridge:m7...
Introduction 4 ib828 user’s manual [ board dimensions bottom view.
Installations ib828 user’s manual 5 installations this section provides information on how to use the jumpers and connectors on the ib828 in order to set up a workable system. The topics covered are: installing the cpu ....................................................................................
Installations 6 ib828 user’s manual installing the cpu the ib828 board supports a socket am2 (940-pin) processor socket for amd athlon ™ 64 / athlon ™ 64 x2 (dual core) / sempron ™ processors. To install the cpu, unlock first the socket by pressing the lever sideways, then lift it up to a 90-degree ...
Installations ib828 user’s manual 7 installing the memory the ib828 board supports two ddr2 memory sockets that can support up to 4gb memory, ddr2 400/533/667 (w/o ecc function). Installing and removing memory modules to install the ddr2 modules, locate the memory slot on the board and perform the f...
Installations 8 ib828 user’s manual setting the jumpers jumpers are used on ib828 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on ib828 and th...
Installations ib828 user’s manual 9 jumper locations on ib828 jp2: atx or at power selection ....................................................... 10 jp4, jp5, jp6: rs232/422/485 (com2) selection .............................. 10 jb1: clear cmos contents ..............................................
Installations 10 ib828 user’s manual jp2: atx or at power selection jp2 atx power atx at jp4, jp5, jp6: rs232/422/485 (com2) selection com1 is fixed for rs-232 use only. Com2 is selectable for rs232, rs-422 and rs-485. The following describes the settings for com2. Com2 function rs-232 rs-422 rs-485...
Installations ib828 user’s manual 11 jb1: clear cmos contents jb1 setting function pin 1-2 short/closed normal pin 2-3 short/closed clear cmos.
Installations 12 ib828 user’s manual connectors on ib828 connector locations on ib828 ............................................................ 13 cn9: dc power jack (+12v only) ...................................................... 14 cn1, cn2: console port .........................................
Installations ib828 user’s manual 13 connector locations on ib828 connector locations on ib828 cn9: dc power jack (+12v only) ...................................................... 14 cn1, cn2: console port...................................................................... 14 u32: gigabit lan rj4...
Installations 14 ib828 user’s manual cn9: dc power jack (+12v only) pin # signal name 1 +12v 2 +12v 3 gnd 4 gnd 5 gnd cn1, cn2: console port the console port is an rj45 rs-232 serial port. Pin # signal name 1 rts 2 dtr 3 txd 4 gnd 5 dcd 6 rxd 7 dsr 8 cts u32: gigabit lan rj45 port cn7, cn8: audio li...
Installations ib828 user’s manual 15 j1, j2: amd 780e hdmi connector [ signal name pin # pin # signal name data 2- 1 2 gnd data 2+ 3 4 data 1+ gnd 5 6 data 1- data 0+ 7 8 gnd data 0- 9 10 clock + gnd 11 12 clock - nc 13 14 nc ddc clock 15 16 ddc data gnd 17 18 +5v hot power 19 20 n.C. J3, j4: ati e4...
Installations 16 ib828 user’s manual sata1: sata hdd dock the sata hdd dock combines a sata power connector and a sata interface connector. Signal name pin # pin # signal name gnd s1 p1 v3.3 a+ s2 p2 v3.3 a- s3 p3 v3.3 gnd s4 p4 gnd b+ s5 p5 gnd b- s6 p6 gnd gnd s7 p7 gnd p8 v5 p9 v5 p10 v5 p11 rese...
Installations ib828 user’s manual 17 j13: digital i/o connector (4 in, 4 out) signal name pin # pin # signal name ground 1 6 +5v out3 2 7 out1 out2 3 8 out0 in3 4 9 in1 in2 5 10 in0 cpu_fan1: dc-cpu fan power connector pin # signal name 1 rotation detection 2 +12v 3 ground sys_fan1: dc-system fan po...
Installations 18 ib828 user’s manual this page is intentionally left blank..
Bios setup ib828 user’s manual 19 bios setup this chapter describes the different settings available in the award bios that comes with the board. The topics covered in this chapter are as follows: bios introduction ........................................................................ 20 bios setu...
Bios setup 20 ib828 user’s manual bios introduction the award bios (basic input/output system) installed in your computer system‟s rom supports various processors. The bios provides critical low-level support for a standard device such as disk drives, and serial ports. It also adds virus and passwor...
Bios setup ib828 user’s manual 21 phoenix - awardbios cmos setup utility standard cmos features frequency/voltage control advanced bios features load fail-safe defaults advanced chipset features load optimized defaults integrated peripherals set supervisor password power management setup set user pa...
Bios setup 22 ib828 user’s manual standard cmos setup “standard cmos setup” choice allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the motherboard is already installed in a working system, you will not need to select thi...
Bios setup ib828 user’s manual 23 to set the date, highlight the “date” field and use the pageup/ pagedown or +/- keys to set the current time. Time the time format is: hour : 00 to 23 minute : 00 to 59 second : 00 to 59 to set the time, highlight the “time” field and use the / or +/- keys to set th...
Bios setup 24 ib828 user’s manual advanced bios features this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Phoenix - awardbios cmos setup utility advanced bios features cpu feature press enter item help hard disk ...
Bios setup ib828 user’s manual 25 quick power on self test when enabled, this field speeds up the power on self test (post) after the system is turned on. If it is set to enabled, bios will skip some items. First/second/third boot device these fields determine the drive that the system searches firs...
Bios setup 26 ib828 user’s manual security option this field allows you to limit access to the system and setup. The default value is setup. When you select system, the system prompts for the user password every time you boot up. When you select setup, the system always boots up and prompts for the ...
Bios setup ib828 user’s manual 27 advanced chipset features this setup menu controls the configuration of the chipset. Phoenix - awardbios cmos setup utility advanced chipset features pcie configuration press enter item help igx configuration press enter init display first igx nb power management au...
Bios setup 28 ib828 user’s manual memory hole at 15m-16m in order to improve performance, certain space in memory can be reserved for isa cards. This memory must be mapped into the memory space below 16 mb. The choices are enabled and disabled. System bios cacheable the setting of enabled allows cac...
Bios setup ib828 user’s manual 29 integrated peripherals this section sets configurations for your hard disk and other integrated peripherals. The first screen shows three main items for user to select. Once an item selected, a submenu appears. Details follow. Phoenix - awardbios cmos setup utility ...
Bios setup 30 ib828 user’s manual onboard serial port these fields allow you to select the onboard serial ports and their addresses. The default values for these ports are: serial port 1 3f8/irq4 serial port 2 2f8/irq3 pwron after pwr-fail this field sets the system power status whether on or off wh...
Bios setup ib828 user’s manual 31 power management setup phoenix - awardbios cmos setup utility power management setup acpi function enabled item help acpi suspend s1 menu level > c2 disable/enable disabled power management option user define hdd power down disabled video off option suspendoff vide...
Bios setup 32 ib828 user’s manual v/h sync + blank default setting, blank the screen and turn off vertical and horizontal scanning. Dpms allows bios to control the video display. Blank screen writes blanks to the video buffer. Soft-off by pwrbtn this field defines the power-off mode when using an at...
Bios setup ib828 user’s manual 33 pnp/pci configurations this option configures the pci bus system. All pci bus systems on the system use int#, thus all installed pci cards must be set to this value. Phoenix - awardbios cmos setup utility pnp/pci configurations reset configuration data disabled item...
Bios setup 34 ib828 user’s manual pc health status this section shows the parameters in determining the pc health status. These parameters include temperatures, fan speeds and voltages. Phoenix - awardbios cmos setup utility pc health status shutdown temperature disabled item help cpu warning temper...
Bios setup ib828 user’s manual 35 frequency/voltage control phoenix - awardbios cmos setup utility frequency/voltage control spread spectrum disabled item help menu level > spread spectrum this field sets the value of the spread spectrum. The default setting is disabled. This field is for ce testing...
Bios setup 36 ib828 user’s manual load fail-safe defaults this option allows you to load the troubleshooting default values permanently stored in the bios rom. These default settings are non-optimal and disable all high-performance features. Load optimized defaults this option allows you to load the...
Appendix ib828 user’s manual 37 drivers installation this section describes the installation procedures for software and drivers under the windows 2000 and windows xp. The software and drivers are included with the motherboard. If you find the items missing, please contact the vendor where you made ...
Appendix 38 ib828 user’s manual vga drivers installation 1. Insert the cd that comes with the board. Click system and click si-28/ib828 drivers. 2. Click amd 780e+ati radeon e4600 serial graphis drivers..
Appendix ib828 user’s manual 39 3. In the welcome screen, click next to continue. Then, in the license agreement screen, also click yes to continue..
Appendix 40 ib828 user’s manual 4. When the select components screen appears, click express: recommended, in selecting the component that you want to install. 5. When the message regarding windows logo testing appears, click continue anyway to proceed with the driver installation. Setup is now compl...
Appendix ib828 user’s manual 41 realtek high definition codec audio driver installation 1. Insert the cd that comes with the board. Click system and click si-28/ib828 drivers. 2. Click realtek high definition codec audio driver..
Appendix 42 ib828 user’s manual 3. In the welcome screen, click next to continue. After the driver installation is complete, click finish on the next screen to restart the computer..
Appendix ib828 user’s manual 43 lan drivers installation 1. Insert the cd that comes with the board. Click system and click si-28/ib828 drivers. 2. Click realtek gbe_fe ethernet pci-e driver...
Appendix 44 ib828 user’s manual 3. When the welcome screen of the installshield wizard appears, click next to continue. 4. On the next screen, you are asked to click install to begin the installtion process. Now, click install to proceed..
Appendix ib828 user’s manual 45 5. Installation is now complete, click finish to exit the installshield wizard..
Appendix 46 ib828 user’s manual this page is intentionally left blank..