1. DL manuals
  2. IBT Technologies
  3. Computer Hardware
  4. IB880
  5. User manual

IBT Technologies IB880 User manual - Setting The Jumpers

Manual is about: Socket 479 Pentium M Intel 855GME 5.25” SBC

Summary of IB880

  • Page 1

    Ib880 socket 479 pentium ® m intel ® 855gme 5.25” sbc user’s manual version 1.0

  • Page 2: Acknowledgments

    Ii ib880 user’s manual acknowledgments award is a registered trademark of award software international, inc. Ps/2 is a trademark of international business machines corporation. Intel and pentium are registered trademarks of intel corporation. Microsoft windows is a registered trademark of microsoft ...

  • Page 3: Introduction

    Ib880 user’s manual iii table of contents introduction ....................................................... 1 product description .......................................................... 1 checklist .......................................................................... 2 ib880 specification...

  • Page 4

    Iv ib880 user’s manual this page is intentionally left blank..

  • Page 5: Introduction

    Installations ib880 user’s manual 1 introduction product description the ib880 pentium ® m 5.25” embedded board incorporates the intel ® advanced 855gme chipset that supports processors from 900mhz to 1.6mhz in both 478 or 479-ball micro-fcbga package with a front size bus of 400mhz. Graphics displa...

  • Page 6: Checklist

    Installations 2 ib880 user’s manual checklist your ib880 package should include the items listed below. • the ib880 pentium m embedded board • this user’s manual • 1 cd containing chipset drivers and flash memory utility • optional cables such as: • 1 slim fdd ribbon cable • 1 audio cable • 2 ide ri...

  • Page 7: Ib880 Specifications

    Installations ib880 user’s manual 3 ib880 specifications form factor 5.25-inch disk-size cpu type intel pentium ® m processor, ultra low voltage, at hfm core frequency of 900 mhz ~ 1.6ghz, 478 or 479-ball micro-fcbga package cpu voltage 0.700v~1.708v system speed 900m~1.7ghz cpu frequency 400mhz gre...

  • Page 8: Board Dimensions

    Installations 4 ib880 user’s manual board dimensions.

  • Page 9: Installations

    Installations ib880 user’s manual 5 installations this section provides information on how to use the jumpers and connectors on the ib880 in order to set up a workable system. The topics covered are: installing the cpu ............................................................ 6 installing the mem...

  • Page 10: Installing The Cpu

    Installations 6 ib880 user’s manual installing the cpu the ib880 board supports a socket 479 processor socket for intel ® pentium ® m or celeron ® m processors. The processor socket comes with a screw to secure the processor. As shown in the left picture below, loosen the screw first before insertin...

  • Page 11: Installing The Memory

    Installations ib880 user’s manual 7 installing the memory the ib880 embedded board supports two ddr memory sockets for a maximum total memory of 2gb in ddr memory type. The memory module capacities supported are 64mb, 128mb, 256mb, 512mb and 1gb. The following table lists the supported ddr dimm conf...

  • Page 12: Setting The Jumpers

    Installations 8 ib880 user’s manual setting the jumpers jumpers are used on ib880 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on ib880 and th...

  • Page 13

    Installations ib880 user’s manual 9 jumper locations on ib880 jumpers on ib880 ..................................................................Page jp1: lvds panel power select.................................................. 10 jp2: gigabit lan enable/disable .......................................

  • Page 14

    Installations 10 ib880 user’s manual configuring the cpu frequency the ib880 embedded board does not provide dip switches to configure the processor speed (cpu frequency). Jp1: lvds panel power select jp1 lvds panel power 3.3v (default) 5v note: the lvds panel resolution can be configured in the bio...

  • Page 15

    Installations ib880 user’s manual 11 jp4: clear cmos contents use jp4 to clear the cmos contents. Note that the atx-power connector should be disconnected from the board before clearing cmos. Jp4 setting function pin 1-2 short/closed normal pin 2-3 short/closed clear cmos jp5, jp6, jp7: rs232/422/48...

  • Page 16

    Installations 12 ib880 user’s manual jp9: com2 rs232 +5v / +12v power setting pin # signal name jp9 signal name pin # 1 ri +12v 2 3 ri (default) ri (default) 4 5 ri +5v 6 com2 settings: pin 1-2 short = +12v, pin 5-6 short = +5v, pin 3-4 short = standard com port jp10: com3 rs232 +5v / +12v power set...

  • Page 17

    Installations ib880 user’s manual 13 jp16: processor operating frequency jp16 cpu fsb open 133mhz close 100mhz.

  • Page 18: Connectors On Ib880

    Installations 14 ib880 user’s manual connectors on ib880 the connectors on ib880 allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on ib880 and their respective functions. Connector locations on ib88...

  • Page 19

    Installations ib880 user’s manual 15 connector locations on ib880 connectors on ib880.........................................................................Page fan1, fan2: system fan power connector ........................................ 16 fan3: cpu fan power connector ...........................

  • Page 20

    Installations 16 ib880 user’s manual fan1, fan2: system fan power connector fan1, fan2 is a 3-pin header for system fans. The fan must be a 12v (500ma) fan. Pin # signal name 1 ground 2 +12v 3 rotation detection fan3: cpu fan power connector fan3 is a 3-pin header for the cpu fan. The fan must be a ...

  • Page 21

    Installations ib880 user’s manual 17 ide2: secondary ide connector signal name pin # pin # signal name reset ide 1 2 ground host data 7 3 4 host data 8 host data 6 5 6 host data 9 host data 5 7 8 host data 10 host data 4 9 10 host data 11 host data 3 11 12 host data 12 host data 2 13 14 host data 13...

  • Page 22

    Installations 18 ib880 user’s manual j2: external audio connector signal name pin # pin # signal name lineout_r 1 2 lineout_l ground 3 4 ground linein_r 5 6 linein l ground 7 8 ground mic-in 9 10 vrefout ground 11 12 protect pin cn3: digital 4-in 4-out i/o connector signal name pin pin signal name g...

  • Page 23

    Installations ib880 user’s manual 19 j5: system function connector j5 provides connectors for system indicators that provide light indication of the computer activities and switches to change the computer status. J5 is a 16-pin header that provides interfaces for the following functions. Speaker: pi...

  • Page 24

    Installations 20 ib880 user’s manual reset switch: pins 7 and 15 the reset switch allows the user to reset the system without turning the main power switch off and then on again. Orientation is not required when making a connection to this header. Pin # signal name 7 reset# 15 ground hard disk drive...

  • Page 25

    Installations ib880 user’s manual 21 j7: 10/100mbit ethernet connector signal name pin pin signal name 5vsb 1 6 speed led rx+ 2 7 rx- liled 3 8 pull low actled 4 9 pull low tx+ 5 10 tx- j8: vga crt connector signal name pin pin signal name r 1 9 +5v g 2 10 gnd b 3 11 nc nc 4 12 ddcdat gnd 5 13 hsync...

  • Page 26

    Installations 22 ib880 user’s manual j13, j9: lvds connectors (1st channel, 2nd channel) the lvds connectors are composed of the first channel (j13) and second channel (j9) to support 24-bit or 48-bit. Signal name pin # pin # signal name tx0- 2 1 tx0+ ground 4 3 ground tx1- 6 5 tx1+ 5v/3.3v 8 7 grou...

  • Page 27

    Installations ib880 user’s manual 23 j17: parallel port connector the following table describes the pin out assignments of this connector. Signal name pin # pin # signal name line printer strobe 1 14 autofeed pd0, parallel data 0 2 15 error pd1, parallel data 1 3 16 initialize pd2, parallel data 2 4...

  • Page 28

    Installations 24 ib880 user’s manual com2 is jumper selectable for rs-232, rs-422 and rs-485. Pin # signal name rs-232 r2-422 rs-485 1 dcd tx- data- 2 rx tx+ data+ 3 tx rx+ nc 4 dtr rx- nc 5 ground ground ground 6 dsr rts- nc 7 rts rts+ nc 8 cts cts+ nc 9 ri cts- nc 10 nc nc nc j20: irda connector j...

  • Page 29

    Installations ib880 user’s manual 25 j23: ps/2 keyboard/mouse connector j23, a 10-pin header connector, has functions for both keyboard and mouse. The following table shows the pin assignments of this connector. Signal name pin # pin # signal name protect pin 10 5 n.C. Kb clock 9 4 mouse clock kb da...

  • Page 30: Watchdog Timer Configuration

    Installations 26 ib880 user’s manual watchdog timer configuration the wdt is used to generate a variety of output signals after a user programmable count. The wdt is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock. Under these sort of circums...

  • Page 31

    Installations ib880 user’s manual 27 mov cl, 30h.

  • Page 32

    Installations 28 ib880 user’s manual call write_reg ;watchdog enabled call lock_chip ret enable_and_set_watchdog endp ;[]=============================================== ; name : disable_watchdog ; in : none ; out : none ;[]=============================================== disable_watchdog proc near ca...

  • Page 33

    Installations ib880 user’s manual 29 unlock_chip proc near mov dx, 4eh mov al, 0aah out dx, al ret unlock_chip endp ;[]================================================ ; name : write_reg ; in : cl - register index ; al - value to write ; out : none ;[]================================================...

  • Page 34: Bios Setup

    Bios setup 30 ib880 user’s manual bios setup this chapter describes the different settings available in the award bios that comes with the board. The topics covered in this chapter are as follows: bios introduction .....................................................................31 bios setup......

  • Page 35: Bios Introduction

    Bios setup ib880 user’s manual 31 bios introduction the award bios (basic input/output system) installed in your computer system’s rom supports intel pentium 4 processors. The bios provides critical low-level support for a standard device such as disk drives, serial ports and parallel ports. It also...

  • Page 36

    Bios setup 32 ib880 user’s manual phoenix - awardbios cmos setup utility standard cmos features frequency/voltage control advanced bios features load fail-safe defaults advanced chipset features load optimized defaults integrated peripherals set supervisor password power management setup set user pa...

  • Page 37: Standard Cmos Setup

    Bios setup ib880 user’s manual 33 standard cmos setup “standard cmos setup” choice allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the motherboard is already installed in a working system, you will not need to select thi...

  • Page 38

    Bios setup 34 ib880 user’s manual time the time format is: hour : 00 to 23 minute : 00 to 59 second : 00 to 59 to set the time, highlight the “time” field and use the / or +/- keys to set the current time. Ide primary hdds / ide secondary hdds the onboard pci ide connectors provide primary and secon...

  • Page 39

    Bios setup ib880 user’s manual 35 video this field selects the type of video display card installed in your system. You can choose the following video display cards: ega/vga for ega, vga, sega, svga or pga monitor adapters. (default) cga 40 power up in 40 column mode. Cga 80 power up in 80 column mo...

  • Page 40: Advanced Bios Features

    Bios setup 36 ib880 user’s manual advanced bios features this section allows you to configure and improve your system and allows you to set up some system features according to your preference. Phoenix - awardbios cmos setup utility advanced bios features cpu feature press enter item help virus warn...

  • Page 41

    Bios setup ib880 user’s manual 37 first/second/third boot device these fields determine the drive that the system searches first for an operating system. The options available include floppy, ls120, hdd-0, scsi, cdrom, hdd-1, hdd-2, hdd-3, zip100, usb-fdd, usb-cdrom, usb-hdd and disable. Boot other ...

  • Page 42

    Bios setup 38 ib880 user’s manual security option this field allows you to limit access to the system and setup. The default value is setup. When you select system, the system prompts for the user password every time you boot up. When you select setup, the system always boots up and prompts for the ...

  • Page 43: Advanced Chipset Features

    Bios setup ib880 user’s manual 39 advanced chipset features this setup menu controls the configuration of the chipset. Phoenix - awardbios cmos setup utility advanced chipset features dram timing selectable by spd item help cas latency time 2 active to precharge delay 6 dram ras# to cas# delay 3 dra...

  • Page 44

    Bios setup 40 ib880 user’s manual dram ras# precharge this option sets the number of cycles required for the ras to accumulate its charge before the sdram refreshes. The default setting for the active to precharge delay is 3. Dram data integrity mode select ecc if your memory module supports it. The...

  • Page 45

    Bios setup ib880 user’s manual 41 agp aperture size the field sets aperture size of the graphics. The aperture is a portion of the pci memory address range dedicated for graphics memory address space. Host cycles that hit the aperture range are forwarded to the agp without any translation. The defau...

  • Page 46

    Bios setup 42 ib880 user’s manual integrated peripherals this section sets configurations for your hard disk and other integrated peripherals. The first screen shows three main items for user to select. Once an item selected, a submenu appears. Details follow. Phoenix - awardbios cmos setup utility ...

  • Page 47

    Bios setup ib880 user’s manual 43 phoenix - awardbios cmos setup utility secondio device onboard serial port 3 3e8 item help serial port 3 use irq irq10 onboard serial port 4 2e8 serial port 4 use irq irq11 menu level > onchip primary/secondary pci ide the integrated peripheral controller contains a...

  • Page 48

    Bios setup 44 ib880 user’s manual usb controller the options for this field are enabled and disabled. By default, this field is set to enabled. Usb 2.0 controller the options for this field are enabled and disabled. By default, this field is set to enabled. In order to use usb 2.0, necessary os driv...

  • Page 49

    Bios setup ib880 user’s manual 45 uart mode select this field determines the uart 2 mode in your computer. The default value is normal. Other options include irda and askir. Parallel port mode this field allows you to determine parallel port mode function. Spp standard printer port epp enhanced para...

  • Page 50: Power Management Setup

    Bios setup 46 ib880 user’s manual power management setup the power management setup allows you to save energy of your system effectively. Phoenix - awardbios cmos setup utility power management setup power-supply type atx item help acpi function enabled power management user define video off method ...

  • Page 51

    Bios setup ib880 user’s manual 47 video off method this field defines the video off features. There are three options. V/h sync + blank default setting, blank the screen and turn off vertical and horizontal scanning. Dpms allows bios to control the video display. Blank screen writes blanks to the vi...

  • Page 52

    Bios setup 48 ib880 user’s manual power on by ring this field enables or disables the power on of the system through the modem connected to the serial port or lan. Resume by alarm this field enables or disables the resumption of the system operation. When enabled, the user is allowed to set the date...

  • Page 53: Pnp/pci Configurations

    Bios setup ib880 user’s manual 49 pnp/pci configurations this option configures the pci bus system. All pci bus systems on the system use int#, thus all installed pci cards must be set to this value. Phoenix - awardbios cmos setup utility pnp/pci configurations reset configuration data disabled item...

  • Page 54: Pc Health Status

    Bios setup 50 ib880 user’s manual pc health status this section shows the parameters in determining the pc health status. These parameters include temperatures, fan speeds and voltages. Phoenix - awardbios cmos setup utility pc health status cpu warning temperature 75°c/167°f item help system temp. ...

  • Page 55: Frequency/voltage Control

    Bios setup ib880 user’s manual 51 frequency/voltage control this section shows the user how to configure the processor frequency. Phoenix - awardbios cmos setup utility frequency/voltage control auto detect pci clk disabled item help spread spectrum modulated disabled menu level > auto detect pci cl...

  • Page 56: Load Fail-Safe Defaults

    Bios setup 52 ib880 user’s manual load fail-safe defaults this option allows you to load the troubleshooting default values permanently stored in the bios rom. These default settings are non-optimal and disable all high-performance features. Load optimized defaults this option allows you to load the...

  • Page 57

    Bios setup ib880 user’s manual 53 this page is intentionally left blank..

  • Page 58: Drivers Installation

    Drivers installation 54 ib880 user’s manual drivers installation this section describes the installation procedures for software and drivers under the windows 98se, windows me, windows 2000 and windows xp. The software and drivers are included with the motherboard. If you find the items missing, ple...

  • Page 59

    Drivers installation ib880 user’s manual 55 intel chipset software intallation utility the intel chipset drivers should be installed first before the software drivers to enable plug & play inf support for intel chipset components. Follow the instructions below to complete the installation under wind...

  • Page 60

    Drivers installation 56 ib880 user’s manual 4. Click yes to accept the software license agreement and proceed with the installation process. 5. On readme information screen, click next to continue the installation. 6. The setup process is now complete. Click finish to restart the computer and for ch...

  • Page 61: Vga Drivers Installation

    Drivers installation ib880 user’s manual 57 vga drivers installation to install the vga drivers, follow the steps below to proceed with the installation. 1. Insert the cd that comes with the motherboard. Click intel chipsets and then intel(r) 855gme chipset drivers. 2. Click intel(r) 855gme chipset ...

  • Page 62

    Drivers installation 58 ib880 user’s manual ac97 codec audio driver installation follow the steps below to install the realtek ac97 codec audio drivers. 1. Insert the cd that comes with the motherboard. Click intel chipsets and then intel(r) 855gme chipset drivers. 2. Click realtek ac'97 codec audio...

  • Page 63

    Drivers installation ib880 user’s manual 59 intel pro lan drivers installation follow the steps below to complete the installation of the intel pro lan drivers. 1. Insert the cd that comes with the motherboard. Click lan card and then intel(r) pro lan drivers. 2. Click install base software to conti...

  • Page 64: Appendix

    Appendix 60 ib880 user’s manual appendix a. I/o port address map each peripheral device in the system is assigned a set of i/o port addresses which also becomes the identity of the device. The following table lists the i/o port addresses used. Address device description 000h - 01fh dma controller #1...

  • Page 65

    Appendix ib880 user’s manual 61 b. Interrupt request lines (irq) peripheral devices use interrupt request lines to notify cpu for the service required. The following table shows the irq used by the devices on board. Level function irq0 system timer output irq1 keyboard irq2 interrupt cascade irq3 se...