1. DL manuals
  2. IC Realtime
  3. Security Camera
  4. AVSZ4112T
  5. User Manual

IC Realtime AVSZ4112T User Manual

Manual is about: HD-AVS Intelligent Speed Dome

Summary of AVSZ4112T

  • Page 1

    Hd-avs intelligent speed dome user’s manual version 1.0.0

  • Page 2

    Table of contents 1 features and functions........................................................................................... 1 1.1 general introduction ..............................................................................................................................................

  • Page 3

    3 menu ................................................................................................................................. 6 3.1 screen menu index ..............................................................................................................................................

  • Page 4

    8 appendix 3 wire gauge reference sheet ................................................................27 9 appendix 4 toxic or hazardous materials or elements ...............................28 iii.

  • Page 5: Welcome

    Welcome thank you for purchasing our product! This user’s manual is designed to be a reference tool for the operation of your system. Here you can find information about this speed dome features and functions, as well as a detailed menu tree. Please keep it well for future reference! Before installa...

  • Page 6

    Important safeguards and warnings 1 ．electrical safety all installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the selv (safety extra low voltage) and the limited power source is rated 24v ac in the iec60950-1. We assume...

  • Page 7

    If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to clean the device. 6. About accessories always use all the accessories recommended by manufacturer. Before installation, please open the package and che...

  • Page 8

    1 features and functions 1.1 general introduction hd-avs (high definition analog video system) is the hd video transmission specifications via the coaxial cable. It adopts analog modulation technology to transmit progressive hd video. This product integrates block camera and ptz together. It is easy...

  • Page 9

    Camera scans back and forth regularly in a horizontal field. Here you need to set left and right limit and scan speed. 1.2.9 auto tour add presets into a routine in a desired order and then set time and stop duration for each address. The dome will begin an auto touring between these presets. 1.2.10...

  • Page 10

    2 preparation works these series products support two control modes: serial/hd-avs. For hd-avs series product, please select control mode as hd-avs. The control signal is sent to the ptz via the coaxial cable. For the serial mode, the control signal is sent to the ptz via the rs485 port. 2.1 hd-avs ...

  • Page 11

    Open the transparent enclosure, there are two dial switch buttons on the pcb of one side of the speed dome (there are labels.). You can use them to set speed dome protocol, baud rate, address and etc. See figure 2-2 . After setup, you need to click on-off button or go to the osd menu to select resta...

  • Page 12

    Please refer to the parity sheet for detailed information. 3 4 parity off off none on off even off on odd on on none 2.2.3 set address dial switch the encode mode adopts binary system. 1 to 8 is the valid bit. The highest address bit is 255. See figure 2-4. Figure 2-4 you can refer to the following ...

  • Page 13

    3 menu 3.1 screen menu index note: err means current setup is invalid. … means there is submenu. System setting display setting camera setting function setting alarm setting system information addr information set north language : english factory default restart back exit preset : on azimuth disp : ...

  • Page 14

    The above diagram illustrates the overall structure of the speed dome setup menu. Note: err means current setup is invalid. Please restore factory default setup. Please make sure all the cable connections are right. 3.2 self-diagnosis system information addr ：001-h br ：9600 parity ：none version ：v1....

  • Page 15

    3.4 menu operation in the speed dome main menu, you can use the left/right button on the keyboard or in the speed dome terminal menu to configure the system menu. Before setup, please move the cursor to the current item you want to configure. In main menu, please click confirm button to go to the su...

  • Page 16

    3.4.1.2 address information addr type ：hard addr-hard ：1 addr-soft ：0 back exit figure 3-5 address information move the cursor to site information and then click confirm button. Addr type: there are two options: soft and hard. Please use the left/right button on the keyboard or in the speed dome ter...

  • Page 17

    Camera factory default camera restart back exit figure 3-9 next page move the cursor to camera setting and then click confirm button, you can go to the submenu. White balance setup: it is to set camera white balance mode. Move the cursor to current option and then click confirm button, you can go to...

  • Page 18

    Figure 3-10 white balance move the cursor to white balance mode and then click confirm button, you can go to the submenu. White balance mode: set white balance adjustment mode. There are several modes such as auto, atw, indoor, outdoor, and manual and etc. Please use the left/right button on the key...

  • Page 19

    O agc gain limit: it is to set auto gain high limit. Please click the left/right button to set. O slow shutter low limit: please click the left/right button to set. O noise reduction: there may noise when the camera is monitoring the low illumination environments. You can use the digital filter to p...

  • Page 20

    Day/night: it is to set camera day/night switch mode. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. Threshold: the speed dome can switch the day/night mode when it reached the threshold you set here. Day/night mode: it is to set day/night switch mode. Cl...

  • Page 21

    Gamma: it is to set picture gamma. It includes the fourth menu. Move the cursor to current item an then click confirm button to go to the submenu. Contrast: it is to set picture color contrast. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. Style: it is t...

  • Page 22

    Menu idle: if current setup is on, once you open the menu and leave it idle for specified period, the menu may automatically disappear. If current setup is off, the menu is always there and will not disappear. Please use the left/right button to set. Ptz auto stop: the speed dome will stop all the p...

  • Page 23

    Pan speed: set dome rotation speed. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. Call: move the cursor to call item and then click confirm button. The dome begins 360 degrees continuous rotation. Stop: highlight stop item and then click confirm button. ...

  • Page 24

    Figure 3-25 tour setting-2 dwell: here is t set dwell time. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. Speed: here you can set the speed value. When you move the cursor to one tour number, you can use left/right button to turn the page. When you move ...

  • Page 25

    Any manual operation during the pattern procedure will terminate current dome pattern operation. 3.4.4.6 idle motion idle motion ：off idle time ：10min idle motion ：none parameter ：none back exit figure 3-27 idle motion when there is no available command for specified time, dome automatically goes on...

  • Page 26

    Privacy no：here is to set privacy mask zone. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. You can call corresponding privacy mask zone number if you have successfully set one. Privacy masking: there are two settings: on and off. Please go to the corresp...

  • Page 27

    3.4.5 alarm setting alarm no ：1 action ：none parameter ：none contact ：n/o relay out ：off reset delay ：3s save back exit figure 3-32 alarm setting move the cursor to highlight alarm setting button and then click confirm button. Alarm no: here is to set alarm input. Alarm input value ranges from 1 to ...

  • Page 28

    4 cable connection 4.1 cable connection the speed dome combination cable includes video cable connection port, rs485 connection port, alarm input and output port, and power cable connection port. Please refer to the label for detailed information. Slight difference may be found in the port amount si...

  • Page 29

    Sheet 4-2 4.2 system layout 4.2.1 system connection 4.2.1.1 bus connection please refer to figure 4-1 for system connection information. Figure 4-1 note: please use shielded twisted pair. The shielded layer shall connect to gnd firmly; otherwise it may affect communication or video work. 4.2.1.2 sta...

  • Page 30

    Figure 4-3 4.2.3 keyboard connection this series hd-avs speed dome supports keyboard operation. You can use keyboard to control the dome and ptz. The display and control can work simultaneously. One keyboard can control maximum 255 speed domes. Please refer to figure 4-4. Figure 4-4 speed dome proto...

  • Page 31

    5 faq 5.1 daily maintenance please clean dome cover regularly to get vivid image. Handle the cover with care. Use water to wash. Don’t use cloth to clean. Use mild detergent to clean if there is too much dust. Note: the sweat from your hand may erode plating surface, your nail may scrape dome cover ...

  • Page 32

    6 appendix Ⅰ lightening protection and surge protection this series speed dome adopts tvs lighting protection technology. It can effectively prevent damages from various pulse signals below 4000v, such as sudden lighting and surge. While maintaining your local electrical safety code, you still need ...

  • Page 33

    7 appendix 2 the relationship between the 24v ac cable diameter and the transmission distance it is the recommended transmission distance when the cable diameter is fixed and the 24v ac power consumption is below 10%. For the ac device, the max permission voltage power consumption is 10%. For exampl...

  • Page 34

    8 appendix 3 wire gauge reference sheet metric bare wire awg swg bare wire cross diameter section （mm） （mm 2 ） 0.050 43 47 0.00196 0.060 42 46 0.00283 0.070 41 45 0.00385 0.080 40 44 0.00503 0.090 39 43 0.00636 0.100 38 42 0.00785 0.110 37 41 0.00950 0.130 36 39 0.01327 0.140 35 0.01539 0.160 34 37 ...

  • Page 35

    9 appendix 4 toxic or hazardous materials or elements toxic or hazardous materials or elements component name pb hg cd cr vi pbb pbde sheet metal ○ ○ ○ ○ ○ ○ plastic parts ○ ○ ○ ○ ○ ○ pcb ○ ○ ○ ○ ○ ○ housing ○ ○ ○ ○ ○ ○ camera driver ○ ○ ○ ○ ○ ○ bearing ○ ○ ○ ○ ○ ○ connection ○ ○ ○ ○ ○ ○ cable motor...

  • Page 36

    Note this manual is for reference only. Slight difference may be found in the user interface. All the designs and software here are subject to change without prior written notice. All trademarks and registered trademarks mentioned are the properties of their respective owners. If there is any uncert...