1 icip-b2000 installation/accessing.
2 index dimensions ……………………………………………………………………………………...3 connections ……………………………………………………………………………………..4 installation & focusing ………………………………………………………………………5-7 web operations/accessing..……………………………………………………………….8-10
3 dimensions.
4 connections ethernet port: connects to a standard ethernet cable. Reset: press it for 3 to 5 seconds; system hardware can restore default setup. Video out: output analog video signal. It can connect to the tv monitor to view the video. Dc 12v: input dc 12v power adaptor. Alarm i/o: to make connect...
5 installation please follow the steps listed below to install the icip-b2000. Please refer the image above for reference. • please draw the installation holes in the installation surface and then mark three expansion bolts holes in the surface. Insert three bolts in the hole and secure firmly..
6 • please line up the installation holes of the bottom of the pendant mount bracket to the installation holes in the surface. Then insert the three bolts to the holes of the bottom of the bracket. Finally fasten the device on the installation surface. Bracket adjustment you can use the m4 inner hex...
7 lens adjustment turn counter clockwise to remove the lens cover, now you can see the iris front and rear control rod. The front control rod is to focus and the rear control rod is to zoom. See the image bellow. Please turn clockwise to fix the lens cover back firmly. Important • please remove the ...
8 web operation this series ipc product support the web access and management via pc. Web includes several modules: monitor channel preview, system configuration, alarm and etc. Network connection please follow the steps listed below for network connection. • make sure the ipc has connected to the n...
9 default factory name is admin and password is admin. Note: for security reasons, please modify your password after you first login. Input your ip address here. If it is your first time to login in, system pops up warning information to ask you whether install control webrec.Cab or not after you lo...
10 after you logged in, you can see the main window. Please refer to the web operation manual included in the resource cd for detailed operation instruction..
