1. DL manuals
  2. IC Realtime
  3. Security Camera
  4. ICR2200
  5. Instruction Manual

IC Realtime ICR2200 Instruction Manual

Manual is about: Outdoor High Speed Dome Camera

Summary of ICR2200

  • Page 1

    Instruction manual ver 1.1 outdoor high speed dome camera.

  • Page 2

    Speed dome camera instruction manual 2/47 this lightning flash with arrowhead symbol is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This exclamatio...

  • Page 3

    Speed dome camera instruction manual 3/47 important safeguard 1. Read instructions read all of the safety and operating instructions before using the product. 2. Retain instructions save these instructions for future reference. 3. Attachments / accessories do not use attachments or accessories unles...

  • Page 4

    Speed dome camera instruction manual 4/47 ○ 1 introduction features 5 product & accessories 7 parts name & functions 8 ○ 2 installation dip switch setup 9 installation using wall mount bracket 11 installation using ceiling mount bracket 12 cabling 14 ○ 3 operation checking before operation 16 preset...

  • Page 5

    Speed dome camera instruction manual 5/47 features camera specifications z ccd sensor : 1/4" sony super had ccd → ×22, ×30 model 1/4" sony exview ccd → ×26 model z zoom magnification : × 22 optical zoom, × 10 digital zoom (max × 220 zoom) → ×22 model × 30 optical zoom, × 10 digital zoom (max × 300 z...

  • Page 6

    Speed dome camera instruction manual 6/47 osd(on screen display) menu z osd menu is provided to display the status of camera and to configure the functions interactively. Z the information such as camera id, pan/tilt angle, alarm i/o and preset can be displayed on screen. Alarm i/o functions z 4 ala...

  • Page 7

    Speed dome camera instruction manual 7/47 product & accessories product & accessories z main body * z main body (sun-shield) * z dome cover z wall mount bracket ** z ceiling mount bracket ** z screws options z pole mount adapter z cornor mount adapter introduction 1.

  • Page 8

    Speed dome camera instruction manual 8/47 parts name & functions main body cable dip switch lockup screw drop prevention spring cabling terminal block fuse main body connector mold line z main body z mount bracket z dome cover do not detach protection vinyl from dome cover before finishing all insta...

  • Page 9

    Speed dome camera instruction manual 9/47 dip switch setup before you install the camera, you should set the dip switches to configure the camera id, communication protocol. On on pr ot0 id0 1 8 1 8 pr ot1 pr ot 2 st 0 st 1 st 2 st 3 id7 cam id communication protocol camera id camera id setup 1 2 3 ...

  • Page 10

    Speed dome camera instruction manual 10/47 communication protocol setup 1 2 3 4 5 6 on on 7 8 sensor type setup 1 2 3 4 5 6 on on 7 8 z select the appropriate protocol with dip switch combination. Switch state p0 (pin 1) p1 (pin 2) p2 (pin 3) protocol/baud rate off off off pelco-d, 2400 bps on off o...

  • Page 11

    Speed dome camera instruction manual 11/47 installation using wall mount bracket ① install wall mount bracket on wall. ② wire cables to terminal blocks on the pcb in wall mount bracket. ③ hook up “drop prevention spring” on main body to prevent camera from unexpected drop and connect main body cable...

  • Page 12

    Speed dome camera instruction manual 12/47 installation using ceiling mount bracket ① to pass cables to upside of ceiling, please make a hole with 50~60mm diameter on the ceiling panel and attach the ceiling mount bracket on it. ② wire cables to terminal blocks on the pcb in ceiling mount bracket. ③...

  • Page 13

    Speed dome camera instruction manual 13/47 ⑤ turn main body on its axis in cw(clockwise) direction and, after assembling them, screw main body to ceiling mount bracket to protect them from separation by vibration or others. Installation 2.

  • Page 14

    Speed dome camera instruction manual 14/47 cabling rs-485 bnc pwr+ pwr- video(+) video(-) rs-485+ rs-485- relay1 common+ sen1 sen2 sen3 sen4 braket terminal block moinitor controller / dvr power light alarm buzzer sensor output devices irda sensor door switch relay2 power connection z please, check ...

  • Page 15

    Speed dome camera instruction manual 15/47 alarm i/o connection z sensor input before connecting sensors, check driving voltage and output signal type of the sensor. Since output signal types of the sensors are divided into open collector and voltage output type in general, the cabling must be done ...

  • Page 16

    Speed dome camera instruction manual 16/47 check points before operation z before power is applied, please check the cables carefully. Z the camera id of the controller must be identical to that of the target camera. The camera id can be checked by reading dip switch of the camera. Z if your control...

  • Page 17

    Speed dome camera instruction manual 17/47 starting osd menu z function using the osd menu, preset, pattern, swing, group and alarm i/o function can be configured for each application. Z enter menu [95] reserved preset z description some preset numbers are reserved to special functions. Z function [...

  • Page 18

    Speed dome camera instruction manual 18/47 preset z function max. 127 positions can be stored as preset position. The preset number can be assigned from 1 to 128, but 95 is reserved for starting osd menu. Camera characteristics (i.E. White balance, auto exposure) can be set up independently for each...

  • Page 19

    Speed dome camera instruction manual 19/47 pattern z function pattern function is that a camera memorizes the path (mostly curve path) by joystick of controller for assigned time and revives the path exactly as it memorized. 4 patterns are available and maximum 1200 communication commands can be sto...

  • Page 20

    Speed dome camera instruction manual 20/47 group z function the group function allows running sequence of presets, pattern and/or swings. Max 8 group can be stored. Each group can have max 20 action entities which can be preset, pattern or swing. Preset speed can be set up and the repeat number of p...

  • Page 21

    Speed dome camera instruction manual 21/47 other functions z power up action this function enables to resume the last action executed before power down. Most of actions such as preset, pattern, swing and group are available for this function but jog actions are not available to resume. Z auto flip i...

  • Page 22

    Speed dome camera instruction manual 22/47 osd display of main screen p/t/z information camera id alarm information action title preset label label12345 preset1 i:1--- o:-2 cam 1 15/4/x1/n z p/t/z information current pan/tilt angle in degree, zoom magnification and a compass direction. Z camera id c...

  • Page 23

    Speed dome camera instruction manual 23/47 general rules of key operation for menu z the menu items surrounded with ( ) always has its sub menu. Z for all menu level, to go into sub menu, press near key. Z to go to up-one-level menu, press far key. Z to move from items to item in the menu, use joyst...

  • Page 24

    Speed dome camera instruction manual 24/47 display setup display setup ------------------------ camera id on ptz information auto action title auto preset label auto alarm i/o auto back exit compass direction setup set north direction ------------------------ move to target position [near:save /far:...

  • Page 25

    Speed dome camera instruction manual 25/47 privacy zone mask setup this function availability should be different by models. Privacy zone ------------------------ mask no 1 undefined display off clear mask cancel back exit privacy zone area setup edit mask 1 ------------------------ move to target p...

  • Page 26

    Speed dome camera instruction manual 26/47 camera setup (×22 model) zoom camera setup ------------------------ focus mode semiauto max zoom x220 flickerless off color on line lock off back exit setup the general functions of zoom camera module. Z focus mode [auto/manual/semiauto] sets camera focus m...

  • Page 27

    Speed dome camera instruction manual 27/47 white balance setup wb setup - global ------------------------ wb mode auto red adjust --- blue adjust --- back exit z wb mode [auto/manual] in manual mode, red and blue level can be set up manually z red adjust [0~255] z blue adjust [0~255] how to use osd ...

  • Page 28

    Speed dome camera instruction manual 28/47 auto exposure setup ae setup - global ------------------------ backlight off day/night auto slow shutter off ae mode auto iris level --- gain level --- shutter spd --- brightness 50 back exit note) shutter speed table value shutter value shutter value shutt...

  • Page 29

    Speed dome camera instruction manual 29/47 camera setup (×30 model) zoom camera setup ------------------------ focus mode semiauto max zoom x300 flickerless off color on line lock off back exit setup the general functions of zoom camera module. Z focus mode [auto/manual/semiauto] sets camera focus m...

  • Page 30

    Speed dome camera instruction manual 30/47 white balance setup wb setup - global ------------------------ wb mode auto red adjust --- blue adjust --- back exit auto exposure setup ae setup - global ------------------------ backlight off day/night auto slow shutter off ae mode auto iris level --- gai...

  • Page 31

    Speed dome camera instruction manual 31/47 note) backlight setting the compensation rate of level 1 is higher than that of level 2. Value description value description c1 z criteria area : center of image z blc level : 1 c2 z criteria area : center of image z blc level : 2 l1 z criteria area : left ...

  • Page 32

    Speed dome camera instruction manual 32/47 camera setup (×26 model) zoom camera setup ------------------------ focus mode semiauto digital zoom on flickerless off color on line lock off back exit setup the general functions of zoom camera module. Z focus mode [auto/manual/semiauto] sets camera focus...

  • Page 33

    Speed dome camera instruction manual 33/47 white balance setup wb setup - global ------------------------ wb mode auto red adjust --- blue adjust --- back exit auto exposure setup auto exposure setup ------------------------ backlight off day/night auto ae mode auto iris level --- gain level --- shu...

  • Page 34

    Speed dome camera instruction manual 34/47 motion setup motion setup ------------------------ motion lock off pwr up action on auto flip on jog max speed 120/sec jog direction inverse back exit setup the general functions of pan/tilt motions. Z motion lock [on/off] if motion lock is set to on, it is...

  • Page 35

    Speed dome camera instruction manual 35/47 parking action setup parking action setup ------------------------ park enable off wait time 00:10:00 park action home back exit alarm input setup alarm action setup ------------------------ alarm 1 act not used alarm 2 act not used alarm 3 act not used ala...

  • Page 36

    Speed dome camera instruction manual 36/47 preset setup preset setup ------------------------ preset no. 1 clr preset cancel label123 1- cam adjust global back exit z preset number [1~128] if a selected preset is already defined, camera moves to pre-defined position and preset characteristics such a...

  • Page 37

    Speed dome camera instruction manual 37/47 edit preset scene edit scene - preset 1 ------------------------ move to target position [near:save /far:cancel] edit preset label edit label - preset 1 ------------------------ [ ] ---------- 1234567890 ok abcdefghij cancel klmnopqrst uvwxyzabcd efghijklmn...

  • Page 38

    Speed dome camera instruction manual 38/47 relay out setup relay out - preset 1 ------------------------ relay out 1 off relay out 2 off back exit z relay out × [on/off] sets relay outputs for assigned preset. 4 how to use osd menu.

  • Page 39

    Speed dome camera instruction manual 39/47 swing setup swing setup ------------------------ swing no. 1 1st pos. Not used 2nd pos. Not used swing speed 30/sec clear swing cancel back exit z swing number [1~8] selects swing number to edit. If a selected swing has not defined, "not used" is displayed ...

  • Page 40

    Speed dome camera instruction manual 40/47 pattern setup pattern setup ------------------------ pattern no. 1 undefined clr pattern cancel back exit edit pattern edit pattern 1 ------------------------ move to start position [near:start /far:cancel] edit pattern 1 [near:save /far:delete] 0/0/x1/n z ...

  • Page 41

    Speed dome camera instruction manual 41/47 group setup group setup ------------------------ group no. 1 undefined clear group cancel back exit edit group edit group 1 ------------------------ no action ### dwell opt ------------------------ 1 none 2 none 3 none 4 none 5 none ------------------------...

  • Page 42

    Speed dome camera instruction manual 42/47 edit group 1 ------------------------ no action ### dwell opt ------------------------ 1 none 2 none 3 none 4 none 5 none ------------------------ back [ :move cursor] cancel [ :change val.] edit group 1 ------------------------ no action ### dwell opt ----...

  • Page 43

    Speed dome camera instruction manual 43/47 system initialization system initialize ------------------------ clear all data no clr display set no clr camera set no clr motion set no clr edit data no reboot camera no reboot system no back exit initial configuration table z display configuration z came...

  • Page 44

    Speed dome camera instruction manual 44/47 specifications model ×22 appearance video signal system ntsc pal ccd 1/4'' sony super had ccd max. Pixels 811(h)×508(v) 410k 795(h)×596(v) 470k effective pixels 768(h)×494(v) 380k 752(h)×582(v) 440k horizontal res. 480 tv line s/n ratio 48 db zoom ×22 optic...

  • Page 45

    Speed dome camera instruction manual 45/47 specifications model ×30 appearance video signal system ntsc pal ccd 1/4'' sony super had ccd max. Pixels 811(h)×508(v) 410k 795(h)×596(v) 470k effective pixels 768(h)×494(v) 380k 752(h)×582(v) 440k horizontal res. 480 tv line s/n ratio 48 db zoom ×30 optic...

  • Page 46

    Speed dome camera instruction manual 46/47 specifications model ×26 appearance video signal system ntsc pal ccd 1/4'' sony exview ccd max. Pixels 768(h)×494(v) 380k 752(h)×582(v) 440k horizontal res. 470 tv line 460 tv line s/n ratio 50 db zoom ×26 optical zoom, ×12 digital zoom focal length f1.6~3....

  • Page 47

    Speed dome camera instruction manual 47/47 dimension z main body z ceiling mount bracket 162.5 73 149 206 z main body (sun-shield) 163.7 73 149 227.2 50 80 110 158.2 74.1 81.5 1-1/2" npt 130 8 3- 12 0 12 0 z wall mount bracket 158 120 136 10 4- 111.2 356 191 213.7 3/4" npt unit (mm) 5 specifications.