ICandy peach Instruction Manual - page 8
iCandy peach
Carrycot Info
The iCandy peach carrycots are certified to
BS EN 1466:2004+A1:2007 Standard for
carrycots and overnight sleeping.
Carrycot internal measurements L x W:
(guide only)
Main Internal mattress size: 74cm x 30cm
Upper Internal mattress size: 68cm x 28cm
Lower Internal mattress size: 69cm x 26cm
External base measurements L x W:
(guide only)
Main: 77cm x 34cm
Upper: 77cm x 32cm
Lower: 73cm x 30cm
Carrycot cleaning information
The exterior of the carrycot, hood and
apron of the iCandy peach carrycot may be
cleaned with a damp cloth.
The lining and cover must be washed by
hand using a soft detergent at a maximum
temperature of 30 degrees (see instructions
on washing label). Do not place in washing
machine or tumble-dryer!
10. Warning
The iCandy peach
carrycots are only suitable for a
child who cannot sit up unaided, roll
over and cannot push itself up on its
hands and knees. Maximum weight of
the child : 9 kg (approx 6 months).
11. Warning
Do not let other
children play unattended near the
carrycot.
12. Warning
Do not use if any
part is broken, torn or missing.
13. Warning
never use a
mattress thicker than 30mm. This
will reduce the effective height
inside of the carrycot to less than
150mm. When a mattress is
purchased separately it should
conform to BS1877-part 10 :1997.
important:
1. Use only on a firm, horizontal, level and
dry surface.
2. The handles and the bottom of the
carrycots should be inspected regularly for
signs of damage and wear.
3. Be aware of the risk of open fire and
other source of strong heat, such as
electric bar fires, gas fires etc, in the vicinity
of the carry cot.
4. The iCandy peach carrycots are not a
safe means of transport by car and should
NEVER be used as such. Use an approved
car safety seat for transport by car.
The coded yellow leg bases are grooved to
prevent incorrect orientation.
9. Warning
Check that the pram
body or seat unit attachment
devices are correctly engaged
before use.
Upper carrycot: The upper carrycot can
ONLY be fitted facing rearward (baby
facing parent). The frame leg bases are
grooved to prevent incorrect orientation
when fitted to the upper position of the
‘Blossom’ adaptor frame.
note: The upper carrycot can be fitted to
the main chassis as a single carrycot if
required. (See main c/cot fitting).
To release & remove the carrycot: (All
c/cots). Depress the lower portion of the
grey outer ring on each side of the carrycot;
the c/cot frame ‘jumps up’.
This function can be operated in two
separate single handed actions or
simultaneously using both hands: When
both sides are disengaged the carrycot can
be removed from the chassis.
important: Do not lift the carrycot using
hood frame.
3. Carrycot Raincovers
Fitting of raincovers: Fit raincover over
the hood/canopy area before fitting over
the foot end of carrycot. Ensure elasticated
seams of raincover are positioned under
the base of the carrycot.