2011.01.19 411za/811za/611za quick start guide v1.0(n04)- p.1 411za/811za/611z/611za (n04) quick start guide 1. Packing........................................P2 2. Hard disk installation.................P3 3. Dvd-rw installation....................P4 3. Front panel controls...................P5 4. ...
2011.01.19 411za/811za/611za quick start guide v1.0(n04)- p.2 1. Dvr 2. Quick start 3. Ir remote control ＊16ch: pressed "dvr1" button before use 4. Battery 5. Cd 6. Hard disk mount (411za / 811za / 611z / 611za only) 7. Screws 8. Power adaptor 9. Power cord (411za / 811za / 611z / 611za only) 10. Db...
2011.01.19 411za/811za/611za quick start guide v1.0(n04)- p.3 step 1) fix the hdd to rack mount with the screws as indicated. Step 2) place the hdd on the hdd plate and screw it as indicated. Step 3) connect the power and the sata cables as indicated. Note: after installation, please initialize hard...
2011.01.19 411za/811za/611za quick start guide v1.0(n04)- p.4 step 1: remove the front cover from dvr. Step 2: put the dvd-rw into the unit as indicated. Step 3: put dvr bottom up, screw to fix the dvd-rw as indicated. Step 4: connect the power and the flat cables as indicated..
2011.01.19 411za/811za/611za quick start guide v1.0(n04)- p.5 ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮ ⑯ control keys description ○ 1 dvd writer optional dvd-rw backup device. ○ 2 usb 2.0 port port for usb external devices (usb flash drive devices use, the mouse behind the back of the usb ports installed).. ○ ...
2011.01.19 411za/811za/611za quick start guide v1.0(n04)- p.6 16ch rear panel connectors ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮ ⑯ ⑰ ① main monitor bnc port for the main monitor. You can switch to spot monitor by gui setting. ② video in bnc input ports for cameras, 16 in total. ③ audio out rca output port for...
2011.01.19 411za/811za/611za quick start guide v1.0(n04)- p.7 8ch rear panel connectors ① ② ③ ④ ⑤ ⑥ ⑦ ⑧⑨ ⑩ ⑪ ⑫ ⑬ ① spot monitor bnc port to display full screen image of all installed cameras in sequence. (depends on model) ② video in bnc input ports for cameras, 8 in total. ③ audio in rca input port...
2011.01.19 411za/811za/611za quick start guide v1.0(n04)- p.8 4ch rear panel connectors ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ① spot monitor bnc port to display full screen image of all installed cameras in sequence. (depends on model) ② video in bnc input ports for cameras, 4 in total. ③ audio in rca input por...
2011.01.19 411za/811za/611za quick start guide v1.0(n04)- p.9 you can monitor all the channels, listen to audio signal and have some related operations under live mode. This paragraph describes the ir remote control, mouse operation and on screen graphical icons under live mode. Table 6-1.1 function...
2011.01.19 411za/811za/611za quick start guide v1.0(n04)- p.10 table 6-1.2 graphical icons that will display after right-clicking your mouse under live mode. Icon description resting the cursor on this icon will bring up the following four menu icons. Main menu. Search menu. Backup menu. Ptz mode. T...
2011.01.19 411za/811za/611za quick start guide v1.0(n04)- p.11 table 6-1.3 description of on screen graphical icons in live mode icon description recording is on schedule recording is on live audio is on live audio is off motion detected on the channel video loss detected on the channel usb device d...
2011.01.19 411za/811za/611za quick start guide v1.0(n04)- p.12 switch to playback mode by pressing “play” under the live mode, the graphical icon will show up on the upper center of the screen and the operation panel ( see below picture) will show up at right lower corner of the screen. You can drag...
2011.01.19 411za/811za/611za quick start guide v1.0(n04)- p.13 switch to the ptz mode by pressing “ptz” button under the live mode. The ptz icon will appear on upper left side of screen and the control panel will appear on the down right side of screen. Table 8-1 mouse operation under the ptz mode i...
