User manual for icb meat grinders models hm-12, hm-22b.
Introduction this manual provides information about the appliance and the manufacturing standards applied, as well as all instructions for use and maintenance. this instruction manual is for the end user and for service personnel index 1 information about the appliance 1.1 general warnings 1.2 saf...
1 information about the appliance 1.1 general warnings the appliance must only be used after reading and understanding this manual and all the safety standards described herein. Although safety devices are installed on the appliance, avoid touching the moving parts with your hands and avoid touching...
Maximum hygiene thanks to a meticulous selection of the materials that come in contact with the food product, and thanks to the elimination of any sharp and rough edges that comes in contact with the product, cleaning is easy and thorough; the appliance can be easily dis-assembled robust and stable ...
Caution: the appliance is designed for the electrical specifications noted on the plate applied to the rear of the appliance; before connecting to the electricity power supply refer to chapter 4.2 connecting to the electricity supply. 3 consigning the appliance 3.1 checking packaging upon consignmen...
The outlet opening of the hm-12/hm-22/hm-22b; turn control knob to the “off” position, the appliance should stop; press the reverse button “turn over”, confirm that the screw feeder changes direction and starts turning clockwise. 5 using the appliance 5.1 controls fig 4-controls 1-start button “on” ...
6. Do not tighten the lock nut excessively; 7. Press the stop button when you have finished using the appliance, then dis-assemble the appliance and thoroughly clean the openings and all other components. 6 regular cleaning 6.1 generalities the appliance must be cleaned at least once a day or if nec...
Fig 7-diagram of hm-12/hm-22/hm-22a stripped for cleaning 7 maintenance 7.1 generalities before servicing the appliance you must disconnect the electricity supply plug isolating the appliance from the main power source. 7.2 foot supports in time the foot supports can deteriorate causing instability....
