ICC ICRESDC9PE Installation Instructions Manual

Summary of ICRESDC9PE

  • Page 1

    Premiumproducts i provenperformance i competitiveprices call us: 888-ask-4-icc i e-mail us: csr@icc.Com i go on-line: www.Icc.Com © copyright 2008, icc. Icc and icc logo are registered trade name and trademark. All rights reserved. 0808 iso 9001:2000 registered © copyright 2009, icc. Icc and icc log...

  • Page 2

    Step 1: with the supplied mounting screws, install the enclosure between wall studs or surface mount. Instalacion de caja entre poste o superficies. I n s t a l l a t i o n i n s t r u c t i o n s surface mount stud mount adjust the enclosure according to the thickness of the drywall/sheetrock. Use ...

  • Page 3

    Telephone module with rj31x jack icc’s telephone module with rj31x jack is an 8-port bridged telephone solution. The module offers a 110 idc input and an expan- sion jack for additional connectivity. It supports up to 8 telephone outlets for phone, fax, modem devices, and has access up to 4 incoming...

  • Page 4

    Step 4. 4. Connect the incoming phone line to the 110 idc labeled “from source.” use a 110 punch down tool to terminate each wire between contact blades. Identify each outlet cable and connect to 110 block labeled “to location.” punch down twisted pairs depending on which lines are desired to be act...

  • Page 5

    Video splitter modules 2 ghz video splitters can support up to eight locations, offering a choice of 4, 6, or 8-ports, and are designed for installation in icc’s net.Media centers. The video splitters receive and distribute catv, antenna, satellite, or modulated video signals up to eight analog or d...

  • Page 6

    Step 4. 4. Prepare an incoming coaxial cable and outgoing coaxial cable by using icc’s coax cable stripper tool (icacscsctv), all-in-one universal compression tool (icacsct01u), and f-type compression connectors (icrdsav01f for rg-6, and icrdsav04f for rg-6 quad-shield). Connect the incoming cable t...