1. DL manuals
  2. Icidu
  3. Network Router
  4. NI-707533
  5. User Manual

Icidu NI-707533 User Manual

Other manuals for NI-707533: Manual Manual

Summary of NI-707533

  • Page 1

    1910020349.

  • Page 2

    Ii.

  • Page 3

    Iii.

  • Page 4: Contents

    Ni-707533 gigabit wireless router 300n i contents package contents .................................................................................................................................... 1 chapter 1. Introduction .............................................................................

  • Page 5

    Ni-707533 gigabit wireless router 300n ii 4.6.5 wireless statistics ................................................................................................... 43 4.7 dhcp ...........................................................................................................................

  • Page 6

    Ni-707533 gigabit wireless router 300n iii 4.16 dynamic dns ...................................................................................................................... 78 4.16.1 comexe.Cn ddns ...................................................................................................

  • Page 7: Package Contents

    Ni-707533 gigabit wireless router 300n -1- package contents the following items should be found in your package: ni-707533 wireless n gigabit router dc power adapter for ni-707533 wireless n gigabit router quick installation guide resource cd for ni-707533 wireless n gigabit router, including: this ...

  • Page 8: Chapter 1.  Introduction

    Ni-707533 gigabit wireless router 300n -2- chapter 1. Introduction thank you for choosing the ni-707533 wireless n gigabit router. 1.1 overview of the router the ni-707533 wireless n gigabit router integrates 4-port switch, firewall, nat-router and wireless ap. The wireless n gigabit router delivers...

  • Page 9

    Ni-707533 gigabit wireless router 300n -3- 1.3 main features complies with ieee 802.11n to provide a wireless data rate of up to 300mbps. One 10/100/1000m auto-negotiation rj45 wan port, four 10/100/1000m auto-negotiation rj45 lan ports, supporting auto mdi/mdix. Provides wpa/wpa2, wpa-psk/wpa2-psk ...

  • Page 10

    Ni-707533 gigabit wireless router 300n -4- wlan off the wireless function is disabled. Flashing the wireless function is enabled. Wan, lan 1-4 off there is no device linked to the corresponding port. On there is a device linked to the corresponding port but there is no activity. Flashing there is an...

  • Page 11

    Ni-707533 gigabit wireless router 300n -5- 2) use the factory default reset button: press the reset button for five seconds and then wait for the router to reboot. Usb: connect with usb mass storage device. Wan: this wan port is where you will connect the dsl/cable modem, or ethernet 1,2,3,4 (lan): ...

  • Page 12

    Ni-707533 gigabit wireless router 300n -6- chapter 2. Connecting the router 2.1 system requirements broadband internet access service (dsl/cable/ethernet) one dsl/cable modem that has an rj45 connector (which is not necessary if the router is connected directly to the ethernet.) pcs with a working e...

  • Page 13

    Ni-707533 gigabit wireless router 300n -7- electrical outlet. The router will start to work automatically. 7. Power on your pc and cable/dsl modem. Figure 2-1 hardware installation of the ni-707533 wireless n gigabit router.

  • Page 14

    Ni-707533 gigabit wireless router 300n -8- chapter 3. Quick installation guide this chapter will show you how to configure the basic functions of your ni-707533 wireless n gigabit router using quick setup wizard within minutes. 3.1 tcp/ip configuration the default ip address of the ni-707533 wireles...

  • Page 15

    Ni-707533 gigabit wireless router 300n -9- figure 3-1 success result of ping command if the result displayed is similar to the figure 3-2, it means the connection between your pc and the router is failed. Figure 3-2 failure result of ping command please check the connection following these steps: 1....

  • Page 16

    Ni-707533 gigabit wireless router 300n -10- 2. Is the tcp/ip configuration for your pc correct? Note: if the router's ip address is 192.168.1.1, your pc's ip address must be within the range of 192.168.1.2 ~ 192.168.1.254. 3.2 quick installation guide with a web-based (internet explorer or netscape ...

  • Page 17

    Ni-707533 gigabit wireless router 300n -11- figure 3-5 quick setup 3. Click next, and then wan connection type page will appear, shown in figure 3-6. Figure 3-6 choose wan connection type the router provides auto-detect function and supports three popular ways pppoe, dynamic ip and static ip to conn...

  • Page 18

    Ni-707533 gigabit wireless router 300n -12- user name and password - enter the user name and password provided by your isp. These fields are case sensitive. If you have difficulty with this process, please contact your isp. 2） if the connection type detected is dynamic ip, the next screen will appea...

  • Page 19

    Ni-707533 gigabit wireless router 300n -13- figure 3-9 quick setup – wireless wireless radio - enable or disable the wireless radio choosing from the pull-down list. Ssid - enter a value of up to 32 characters. The same name of ssid (service set identification) must be assigned to all wireless devic...

  • Page 20

    Ni-707533 gigabit wireless router 300n -14- disable security - the wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the router without encryption. It is recommended strongly that you choose one of following options to enable security. ...

  • Page 21

    Ni-707533 gigabit wireless router 300n -15- chapter 4. Configuring the router this chapter will show each web page's key functions and the configuration way. 4.1 login after your successful login, you will see the fifteen main menus on the left of the web-based utility. On the right, there are the c...

  • Page 22

    Ni-707533 gigabit wireless router 300n -16- figure 4-1 router status 4.3 quick setup please refer to section 3.2: "quick installation guide.".

  • Page 23

    Ni-707533 gigabit wireless router 300n -17- 4.4 wps this section will guide you add a new wireless device to an existing network quickly by wps (wi-fi protected setup) function. A). Choose menu “wps”, you will see the next screen (shown in figure 4-2 ). Figure 4-2 wps wps status - enable or disable ...

  • Page 24

    Ni-707533 gigabit wireless router 300n -18- step 1: press the wps button on the front panel of the router. Step 2: press and hold the wps button of the adapter directly for 2 or 3 seconds, then the adapter will connect to the router by wps automatically. Method two: step 1: press the wps button on t...

  • Page 25

    Ni-707533 gigabit wireless router 300n -19- the wps configuration screen of wireless adapter method three: step 1: keep the default wps status as enabled and click the add device button in figure 4-2 , then the following screen will appear. Figure 4-3 add a new device step 2: choose press the button...

  • Page 26

    Ni-707533 gigabit wireless router 300n -20- the wps configuration screen of wireless adapter step 4: wait for a while until the next screen appears. Click finish to complete the wps configuration. The wps configuration screen of wireless adapter ii. By pin if the new device supports wi-fi protected ...

  • Page 27

    Ni-707533 gigabit wireless router 300n -21- step 1: keep the default wps status as enabled and click the add device button in figure 4-2 , then the following screen will appear. Step 2: choose enter the new device's pin and enter the pin code of the wireless adapter in the field behind pin in the ab...

  • Page 28

    Ni-707533 gigabit wireless router 300n -22- the router into the field behind access point pin. Then click next. The wps configuration screen of wireless adapter note: the default pin code of the router can be found in its label or the wps configuration screen as figure 4-2 . C). You will see the fol...

  • Page 29

    Ni-707533 gigabit wireless router 300n -23- 4.5 network figure 4-4 the network menu there are three submenus under the network menu (shown in figure 4-4 ): lan, wan and mac clone. Click any of them, and you will be able to configure the corresponding function. 4.5.1 lan choose menu “network→lan”, yo...

  • Page 30

    Ni-707533 gigabit wireless router 300n -24- figure 4-6 wan - dynamic ip this page displays the wan ip parameters assigned dynamically by your isp, including ip address, subnet mask, default gateway, etc. Click the renew button to renew the ip parameters from your isp. Click the release button to rel...

  • Page 31

    Ni-707533 gigabit wireless router 300n -25- figure 4-7 wan - static ip ip address - enter the ip address in dotted-decimal notation provided by your isp. Subnet mask - enter the subnet mask in dotted-decimal notation provided by your isp, usually is 255.255.255.0. Default gateway - (optional) enter ...

  • Page 32

    Ni-707533 gigabit wireless router 300n -26- figure 4-8 wan - pppoe user name/password - enter the user name and password provided by your isp. These fields are case-sensitive. Secondary connection - it’s available only for pppoe connection. If your isp provides an extra connection type such as dynam...

  • Page 33

    Ni-707533 gigabit wireless router 300n -27- connect automatically - the connection can be re-established automatically when it was down. Time-based connecting - the connection will only be established in the period from the start time to the end time (both are in hh:mm format). Note: only when you h...

  • Page 34

    Ni-707533 gigabit wireless router 300n -28- should not be configured unless you are sure it is necessary for your isp. In most cases, leaving these fields blank will work. Isp specified ip address - if your isp does not automatically assign ip addresses to the router during login, please click “use ...

  • Page 35

    Ni-707533 gigabit wireless router 300n -29- user name/password - enter the user name and password provided by your isp. These fields are case-sensitive. Auth server - enter the authenticating server ip address or host name. Auth domain - type in the domain suffix server name based on your location. ...

  • Page 36

    Ni-707533 gigabit wireless router 300n -30- figure 4-11 l2tp settings user name/password - enter the user name and password provided by your isp. These fields are case-sensitive. Dynamic ip/ static ip - choose either as you are given by your isp. Click the connect button to connect immediately. Clic...

  • Page 37

    Ni-707533 gigabit wireless router 300n -31- terminates. Connect automatically - connect automatically after the router is disconnected. To use this option, click the radio button. Connect manually - you can configure the router to make it connect or disconnect manually. After a specified period of i...

  • Page 38

    Ni-707533 gigabit wireless router 300n -32- figure 4-12 pptp settings user name/password - enter the user name and password provided by your isp. These fields are case-sensitive. Dynamic ip/ static ip - choose either as you are given by your isp and enter the isp’s ip address or the domain name. If ...

  • Page 39

    Ni-707533 gigabit wireless router 300n -33- connection after a specified period of inactivity (max idle time). If your internet connection has been terminated due to inactivity, connect on demand enables the router to automatically re-establish your connection as soon as you attempt to access the in...

  • Page 40

    Ni-707533 gigabit wireless router 300n -34- figure 4-13 mac address clone some isps require that you register the mac address of your adapter. Changes are rarely needed here. Wan mac address - this field displays the current mac address of the wan port. If your isp requires you to register the mac a...

  • Page 41

    Ni-707533 gigabit wireless router 300n -35- figure 4-15 wireless settings ssid - enter a value of up to 32 characters. The same name of ssid (service set identification) must be assigned to all wireless devices in your network. Considering your wireless network security, the default ssid is set to b...

  • Page 42

    Ni-707533 gigabit wireless router 300n -36- channel - this field determines which operating frequency will be used. The default channel is set to auto, so the ap will choose the best channel automatically. It is not necessary to change the wireless channel unless you notice interference problems wit...

  • Page 43

    Ni-707533 gigabit wireless router 300n -37- figure 4-16 disable security - if you do not want to use wireless security, select this check box, but it’s strongly recommended to choose one of the following modes to enable security. Wep - it is based on the ieee 802.11 standard. If you select this chec...

  • Page 44

    Ni-707533 gigabit wireless router 300n -38- figure 4-17 type - you can choose the type for the wep security on the pull-down list. The default setting is automatic, which can select open system or shared key authentication type automatically based on the wireless station's capability and request. We...

  • Page 45

    Ni-707533 gigabit wireless router 300n -39- note: if you check the wpa/wpa2 radio button and choose tkip encryption, you will find a notice in red as shown in figure 4-18 figure 4-18 radius server ip - enter the ip address of the radius server. Radius port - enter the port that radius service used. ...

  • Page 46

    Ni-707533 gigabit wireless router 300n -40- psk passphrase - you can enter ascii characters between 8 and 63 characters or 8 to 64 hexadecimal characters. Group key update period - specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update. Be su...

  • Page 47

    Ni-707533 gigabit wireless router 300n -41- to add or modify a mac address filtering entry, follow these instructions: 1. Enter the appropriate mac address into the mac address field. The format of the mac address is xx-xx-xx-xx-xx-xx (x is any hexadecimal digit). For example: 00-0a-eb-00-07-8a. 2. ...

  • Page 48

    Ni-707533 gigabit wireless router 300n -42- 4.6.4 wireless advanced choose menu “wireless→wireless advanced”, you can configure the advanced settings of your wireless network. Figure 4-22 wireless advanced transmit power - here you can specify the transmit power of router. You can select high, middl...

  • Page 49

    Ni-707533 gigabit wireless router 300n -43- poor network performance since excessive packets. 2346 is the default setting and is recommended. Dtim interval - this value determines the interval of the delivery traffic indication message (dtim). A dtim field is a countdown field informing clients of t...

  • Page 50

    Ni-707533 gigabit wireless router 300n -44- sent packets - packets sent by the station you cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the refresh button. If the numbers of connected wireless stations go beyond one p...

  • Page 51

    Ni-707533 gigabit wireless router 300n -45- have another dhcp server within your network or else you must configure the computer manually. Start ip address - specify an ip address for the dhcp server to start with when assigning ip addresses. 192.168.1.100 is the default start address. End ip addres...

  • Page 52

    Ni-707533 gigabit wireless router 300n -46- lease time - the time of the dhcp client leased. After the dynamic ip address has expired, a new dynamic ip address will be automatically assigned to the user. You cannot change any of the values on this page. To update this page and to show the current at...

  • Page 53

    Ni-707533 gigabit wireless router 300n -47- figure 4-28 add or modify an address reservation entry to modify or delete an existing entry: 1. Click the modify in the entry you want to modify. If you want to delete the entry, click the delete . 2. Modify the information. 3. Click the save button. Clic...

  • Page 54

    Ni-707533 gigabit wireless router 300n -48- figure 4-30 network sharing service status - indicates the network sharing service's current status. Volume - the volume name of the usb drive the users have access to. Share name - the specified share name of the volume. File system - the file system on t...

  • Page 55

    Ni-707533 gigabit wireless router 300n -49- 3. To specify a volume that the network sharing users can access, click the edit link in the properties column and configure the share settings in figure 4-31. 4. Set the network sharing user's username and password on user accounts page. 5. Click the star...

  • Page 56

    Ni-707533 gigabit wireless router 300n -50- 4.8.2 user accounts you can specify the user name and password for network sharing users on the following user accounts page. Network sharing users can use internet explorer to access files on the usb drive. There are two network sharing users that can acc...

  • Page 57

    Ni-707533 gigabit wireless router 300n -51- 4.9 forwarding figure 4-33 the forwarding menu there are four submenus under the forwarding menu (shown in figure 4-33 ): virtual servers, port triggering , dmz and upnp. Click any of them, and you will be able to configure the corresponding function. 4.9....

  • Page 58

    Ni-707533 gigabit wireless router 300n -52- 2. Select the service you want to use from the common service port list. If the common service port list does not have the service that you want to use, type the number of the service port or service port range in the service port box. 3. Type the ip addre...

  • Page 59

    Ni-707533 gigabit wireless router 300n -53- 4.9.2 port triggering choose menu “forwarding→port triggering”, you can view and add port triggering in the next screen (shown in figure 4-36 ). Some applications require multiple connections, like internet games, video conferencing, internet calling and s...

  • Page 60

    Ni-707533 gigabit wireless router 300n -54- 2. Select a common application from the common applications drop-down list, then the trigger port field and the incoming ports field will be automatically filled. If the common applications do not have the application you need, enter the trigger port and t...

  • Page 61

    Ni-707533 gigabit wireless router 300n -55- 4.9.3 dmz choose menu “forwarding→dmz”, you can view and configure dmz host in the screen (shown in figure 4-38 ).The dmz host feature allows one local host to be exposed to the internet for a special-purpose service such as internet gaming or videoconfere...

  • Page 62

    Ni-707533 gigabit wireless router 300n -56- current upnp status - upnp can be enabled or disabled by clicking the enable or disable button. As allowing this may present a risk to security, this feature is enabled by default. Current upnp settings list - this table displays the current upnp informati...

  • Page 63

    Ni-707533 gigabit wireless router 300n -57- figure 4-41 basic security firewall - a firewall protects your network from the outside world. Here you can enable or disable the router’s firewall. Spi firewall - spi (stateful packet inspection, also known as dynamic packet filtering) helps to prevent cy...

  • Page 64

    Ni-707533 gigabit wireless router 300n -58- ftp alg - to allow ftp clients and servers to transfer data across nat, keep the default enable. Tftp alg - to allow tftp clients and servers to transfer data across nat, keep the default enable. H323 alg - to allow microsoft netmeeting clients to communic...

  • Page 65

    Ni-707533 gigabit wireless router 300n -59- note: dos protection will take effect only when the traffic statistics in “system tool → traffic statistics ” is enabled. Enable icmp-flood attack filtering - enable or disable the icmp-flood attack filtering. Icmp-flood packets threshold (5~3600) - the de...

  • Page 66

    Ni-707533 gigabit wireless router 300n -60- figure 4-43 local management by default, the radio button “all the pcs on the lan are allowed to access the router's web-based utility ” is checked. If you want to allow pcs with specific mac addresses to access the setup page of the router's web-based uti...

  • Page 67

    Ni-707533 gigabit wireless router 300n -61- figure 4-44 remote management web management port - web browser access normally uses the standard http service port 80. This router's default remote management web port number is 80. For greater security, you can change the remote management web port to a ...

  • Page 68

    Ni-707533 gigabit wireless router 300n -62- figure 4-45 parental control settings parental control - check enable if you want this function to take effect, otherwise check disable . Mac address of parental pc - in this field, enter the mac address of the controlling pc, or you can make use of the co...

  • Page 69

    Ni-707533 gigabit wireless router 300n -63- 6. In the status field, you can select enabled or disabled to enable or disable your entry. 7. Click the save button. Click the enable all button to enable all the rules in the list. Click the disable all button to disable all the rules in the list. Click ...

  • Page 70

    Ni-707533 gigabit wireless router 300n -64- 3. Click “parental control” menu on the left to go back to the add or modify parental control entry page: click add new... Button. Enter 00-11-22-33-44-aa in the mac address of child pc field. Enter “allow google” in the website description field. Enter “w...

  • Page 71

    Ni-707533 gigabit wireless router 300n -65- figure 4-49 access control rule management enable internet access control - select the check box to enable the internet access control function, so the default filter policy can take effect. Rule name - here displays the name of the rule and this name is u...

  • Page 72

    Ni-707533 gigabit wireless router 300n -66- 6. In the action field, select deny or allow. 7. In the status field, select enabled or disabled to enable or disable your entry. 8. Click the save button. Click the enable all button to enable all the rules in the list. Click the disable all button to dis...

  • Page 73

    Ni-707533 gigabit wireless router 300n -67- 4. Click “access control → rule” in the left to return to the access control rule management page. Select “enable internet access control” and choose "deny the packets not specified by any access control policy to pass through the router". 5. Click add new...

  • Page 74

    Ni-707533 gigabit wireless router 300n -68- 1) in host description field, create a unique description for the host (e.G. Host_1). 2) in lan ip address field, enter the ip address. If you select mac address, the screen shown is figure 4-53. 1) in host description field, create a unique description fo...

  • Page 75

    Ni-707533 gigabit wireless router 300n -69- 4.12.3 target choose menu “access control → target”, you can view and set a target list in the screen as shown in figure 4-54. The target list is necessary for the access control rule. Figure 4-54 target settings target description - here displays the desc...

  • Page 76

    Ni-707533 gigabit wireless router 300n -70- click the delete all button to delete all the entries in the table. Click the next button to go to the next page, or click the previous button return to the previous page. Figure 4-55 add or modify an access target entry figure 4-56 add or modify an access...

  • Page 77

    Ni-707533 gigabit wireless router 300n -71- 4.12.4 schedule choose menu “access control → schedule”, you can view and set a schedule list in the next screen as shown in figure 4-57. The schedule list is necessary for the access control rule. Figure 4-57 schedule settings schedule description - here ...

  • Page 78

    Ni-707533 gigabit wireless router 300n -72- figure 4-58 advanced schedule settings for example : if you desire to restrict the internet activities of host with mac address 00-11-22-33-44-aa to access www.Google.Com only from 18:00 to 20:00 on saturday and sunday , you should first follow the setting...

  • Page 79

    Ni-707533 gigabit wireless router 300n -73- figure 4-59 static routing to add static routing entries: 1. Click add new… shown in figure 4-59 , you will see the following screen. Figure 4-60 add or modify a static route entry 2. Enter the following data: destination ip address - the destination ip ad...

  • Page 80

    Ni-707533 gigabit wireless router 300n -74- click the previous button to view the information in the previous screen, click the next button to view the information in the next screen. 4.14 bandwidth control figure 4-61 there are two submenus under the bandwidth control menu as shown in figure 4-57. ...

  • Page 81

    Ni-707533 gigabit wireless router 300n -75- figure 4-63 bandwidth control rules list description - this is the information about the rules such as address range. Egress bandwidth - this field displays the max and mix upload bandwidth through the wan port, the default is 0. Ingress bandwidth - this f...

  • Page 82

    Ni-707533 gigabit wireless router 300n -76- 4.15 ip & mac binding setting figure 4-65 the ip & mac binding menu there are two submenus under the ip &mac binding menu (shown in figure 4-61 ): binding setting and arp list. Click any of them, and you will be able to scan or configure the corresponding ...

  • Page 83

    Ni-707533 gigabit wireless router 300n -77- figure 4-67 ip & mac binding setting (add & modify) to add ip & mac binding entries, follow the steps below. 1. Click the add new... Button as shown in figure 4-62. 2. Enter the mac address and ip address. 3. Select the bind checkbox. 4. Click the save but...

  • Page 84

    Ni-707533 gigabit wireless router 300n -78- relationship of mac address and ip address on the arp list, and you could configure the items on the arp list also. This page displays the arp list; it shows all the existing ip & mac binding entries (shown in figure 4-65 ). Figure 4-69 arp list mac addres...

  • Page 85

    Ni-707533 gigabit wireless router 300n -79- dns client service provider will give you a password or key. 4.16.1 comexe.Cn ddns if the dynamic dns service provider you select is www.Comexe.Cn, the page will appear as shown in figure 4-70. Figure 4-70 comexe.Cn ddns settings to set up for ddns, follow...

  • Page 86

    Ni-707533 gigabit wireless router 300n -80- figure 4-71 dyndns.Org ddns settings to set up for ddns, follow these instructions: 1. Type the user name for your ddns account. 2. Type the password for your ddns account. 3. Type the domain name you received from dynamic dns service provider here. 4. Cli...

  • Page 87

    Ni-707533 gigabit wireless router 300n -81- figure 4-72 no-ip.Com ddns settings to set up for ddns, follow these instructions: 1. Type the user name for your ddns account. 2. Type the password for your ddns account. 3. Type the domain name you received from dynamic dns service provider. 4. Click the...

  • Page 88

    Ni-707533 gigabit wireless router 300n -82- corresponding function. The detailed explanations for each submenu are provided below. 4.17.1 time setting choose menu “system tools→time setting”, you can configure the time on the following screen. Figure 4-74 time settings time zone - select your local ...

  • Page 89

    Ni-707533 gigabit wireless router 300n -83- 3. The router will obtain gmt automatically from internet if it has already connected to internet. 4.17.2 diagnostic choose menu “system tools → diagnostic”, you can transact ping or traceroute function to check connectivity of your network in the followin...

  • Page 90

    Ni-707533 gigabit wireless router 300n -84- ping packet size - the size of ping packet. Ping timeout - set the waiting time for the reply of each ping packet. If there is no reply in the specified time, the connection is overtime. Traceroute max ttl - the max number of hops for a traceroute connecti...

  • Page 91

    Ni-707533 gigabit wireless router 300n -85- 1. Download a more recent firmware upgrade file from the icidu website (http://www.Icidu.Com). 2. Type the path and file name of the update file into the file field. Or click the browse button to locate the update file. 3. Click the upgrade button. Note: 1...

  • Page 92

    Ni-707533 gigabit wireless router 300n -86- the router as a backup file and restore the configuration via a backup file as shown in figure 4-79. Figure 4-79 backup & restore configuration click the backup button to save all configuration settings as a backup file in your local computer. To upgrade t...

  • Page 93

    Ni-707533 gigabit wireless router 300n -87- restore the router's settings to factory defaults (system will reboot automatically). Update the configuration with the file (system will reboot automatically. 4.17.7 password choose menu “system tools → password”, you can change the factory default user n...

  • Page 94

    Ni-707533 gigabit wireless router 300n -88- figure 4-82 system log auto mail feature - indicates whether auto mail feature is enabled or not. Mail settings - set the receiving and sending mailbox address, server address, validation information as well as the timetable for auto mail feature, as shown...

  • Page 95

    Ni-707533 gigabit wireless router 300n -89- figure 4-83 mail account settings from - your mail box address. The router would connect it to send logs. To - recipient’s address. The destination mailbox where the logs would be received. Smtp server - your smtp server. It corresponds with the mailbox fi...

  • Page 96

    Ni-707533 gigabit wireless router 300n -90- log level - by selecting the log level, only logs of this level will be shown. Refresh - refresh the page to show the latest log list. Save log - click to save all the logs in a txt file. Mail log - click to send an email of current logs manually according...

  • Page 97

    Ni-707533 gigabit wireless router 300n -91- statistics table: ip/mac address the ip/mac address displayed with statistics total packets the total amount of packets received and transmitted by the router. Bytes the total amount of bytes received and transmitted by the router. Current packets the tota...

  • Page 98: Appendix A: Faq

    Ni-707533 gigabit wireless router 300n -92- appendix a: faq 1. How do i configure the router to access internet by adsl users? 1) first, configure the adsl modem configured in rfc1483 bridge model. 2) connect the ethernet cable from your adsl modem to the wan port on the router. The telephone cord p...

  • Page 99

    Ni-707533 gigabit wireless router 300n -93- 1) login to the router, click the “network” menu on the left of your browser, and click "wan" submenu. On the wan page, select “dynamic ip” for "wan connection type", finish by clicking “save”. 2) some isps require that you register the mac address of your...

  • Page 100

    Ni-707533 gigabit wireless router 300n -94- figure a-5 add or modify a virtual server entry note: your opposite side should call your wan ip, which is displayed on the “status” page. 4) how to enable dmz host: log in to the router, click the “forwarding” menu on the left of your browser, and click "...

  • Page 101

    Ni-707533 gigabit wireless router 300n -95- figure a-7 basic security 4. I want to build a web server on the lan, what should i do? 1) because the web server port 80 will interfere with the web management port 80 on the router, you must change the web management port number to avoid interference. 2)...

  • Page 102

    Ni-707533 gigabit wireless router 300n -96- “service port”, and your ip address next to the “ip address”, assuming 192.168.1.188 for an example, remember to enable and save. Figure a-9 virtual servers figure a-10 add or modify a virtual server entry 5. The wireless stations cannot connect to the rou...

  • Page 103

    Ni-707533 gigabit wireless router 300n -97- appendix b: configuring the pcs in this section, we’ll introduce how to install and configure the tcp/ip correctly in windows xp. First make sure your ethernet adapter is working, refer to the adapter’s manual if needed. 1. Install tcp/ip component 1) on t...

  • Page 104

    Ni-707533 gigabit wireless router 300n -98- figure b-2 5) the following tcp/ip properties window will display and the ip address tab is open on this window by default. Now you have two ways to configure the tcp/ip protocol below: setting ip address automatically select obtain an ip address automatic...

  • Page 105

    Ni-707533 gigabit wireless router 300n -99- figure b-3 setting ip address manually 1 select use the following ip address radio button. And the following items available 2 if the router's lan ip address is 192.168.1.1, type ip address is 192.168.1.X (x is from 2 to 254), and subnet mask is 255.255.25...

  • Page 106

    Ni-707533 gigabit wireless router 300n -100- figure b-4.

  • Page 107: Appendix C: Specifications

    Ni-707533 gigabit wireless router 300n -101- appendix c: specifications general standards ieee 802.3, 802.3u, 802.3ab, 802.11b, 802.11g and 802.11n protocols tcp/ip, pppoe, dhcp, icmp, nat, sntp ports one 10/100/1000m auto-negotiation wan rj45 port, four 10/100/1000m auto-negotiation lan rj45 ports ...

  • Page 108: Appendix D: Glossary

    Ni-707533 gigabit wireless router 300n -102- appendix d: glossary 802.11n - 802.11n builds upon previous 802.11 standards by adding mimo (multiple-input multiple-output). Mimo uses multiple transmitter and receiver antennas to allow for increased data throughput via spatial multiplexing and increase...

  • Page 109

    Ni-707533 gigabit wireless router 300n -103- identifying a wireless local area network. For the wireless devices in a network to communicate with each other, all devices must be configured with the same ssid. This is typically the configuration parameter for a wireless pc card. It corresponds to the...

  • Page 110: Chapter 5.  Warranty

    Ni-707533 gigabit wireless router 300n -104- chapter 5. Warranty unless specified otherwise, all items sold under the icidu name are covered by a 10-year warranty. No warranty or support is provided for the software and rechargeable batteries that are provided. Claims under warranty can be made only...