Iclebo YCR-M04-02 User Manual - ●
7
최적의 청소를 위한 참고사항
●
R
ef
er
ence
Operating principles of robot cleaner
Running of robot cleaner
With about 20 detection sensors, it can avoid wall or objects (chair, vase, etc).
It recognizes the obstacle in front of fixed object with more than 13mm high and
does not fall down on the stairs with its floor detection sensor.
Suction of robot cleaner
This product has one main brush, two side-brushes and vacuum suction duct.
Side-brush gathers the dust on the floor by spinning and main brush will sweep up by rotating.
Fine dust will pile up in the dust bin through vacuum suction duct.
Empty the dust bin after use and wipe the main brush & side-brush regularly.
For further information, refer to <
Using remote control
It is more convenient when you operate the robot cleaner with remote control.
- Press the power button of the remote control to start robot cleaner.
Press power button to stop the operation of the robot cleaner when it’s cleaning.
- User can choose one from four modes with Mode select button.
Select Auto-mode for general cleaning.
For wet mop cleaning, select Mopping mode.
Spot mode is for cleaning the certain spot area and
Climb mode is for cleaning the area with threshold.
For further information, refer to <
- The strength of suctioning will be higher by pressing Turbo button.
- Use Base button to charge.
- Use Clock button to set the time.
- Use Timer button to timer the cleaning.
- Use direction button to change the movement of the robot cleaner.
- Backward direction button of the remote control does not work.