Summary of alki V5
Page 3: Safety Information:
Safety information: (a) check local laws regarding use of a cell phone and headset while driving. If you use the headset while driving, always keep your attention and focus of driving safe at all times. (b) never allow children to play with the headset. Small parts may be a choking hazard. (c) obser...
Page 4: Getting Started
Getting started before using your bluetooth headset, please follow these simple steps: - fully charge your headset battery power (approx. 2 hours). - cell phones to be paired must have bluetooth compatible cell phone. - each manufacturer of mobile phones have different procedures for setting up blue...
Page 5: Talk & Standby Time
(a) when battery power is low the led light will flash red and the headset will emit a beep sound once every 2 minutes. You should recharge the battery power as soon as possible. Only use the manufacturer supplied charger when charging the headset. (b) do not use the power charger outdoor or in damp...
Page 6: Turning Off:
(b) the headset is now in standby mode. The led will start flashing blue every 3 seconds. Turning off: while the headset in standby mode: (a) press and hold the mfb (power) button for a few seconds, and the led will begin to flash red for several seconds. (b) the headset is now power off. Pairing pr...
Page 7
(d) activate your cell phone’s bluetooth function by referring to your cell phone user’s manual for details. Mean while, the handset will search for accessible bluetooth devices. (e) select “bth-02” from the list. (f) enter the pre-programmed passkey “0000” and press “ok” to pair the headset and the...
Page 8
Connection/link between headset and cell phone: after pairing is completed, headset is now in standby mode. Before you place or answer a call, see if the headset icon is shown on the phone’s screen. Follow these easy steps to activate the blue tooth connection/link until the headset icon is on the s...
Page 9: Using The Headset
(a) power off the bluetooth headset (b) select “disconnecting” to remove connection from your handset list. Using the headset once pairing is completed, you may access the following functions: (*note: some of the functions mentioned below are only accessible by handsets supported with hands-free pro...
Page 10
You may interchange conversation in between headset and cell phone when communication is in progress. (1) headset to cell phone: press and hold “volume down” button for about 3 seconds. The headset will emit a short beep and conversation will be transferred to cell phone. (2) cell phone to headset: ...
Page 11
Note: functionality varies depending on the make and model of your cell phone. Please refer to your cell phone user guide for additional information. (e) last number re-dialing: under standby mode, press and hold the “volume up” button for 3 seconds. The headset will connect to the cell phone for la...
Page 12
During conversation via the headset, press and hold the “volume up” and “volume down” buttons at the same time for 3 seconds to mute the headset. To un-mute, short press the “volume up/down” button again. Led indication - headset mfb (power) button. Status blue red emit time note power on 3 times pr...
Page 13: Care and Maintenance
Care and maintenance (a) consider turning your headset off before placing it in your pocket or bag. If the mfb is accidentally depressed, your cell phone may place an unintended call. (b) do not expose the headset to liquid, moisture or humidity, as it is not waterproof. (c) do not use abrasive clea...
Page 14: Trouble Shooting:
Trouble shooting: if you are unable to connect your headset and cell phone, please try the following: (a) ensure your headset is turned on and is properly power charged. (b) ensure the headset is paired with your cell phone correctly. (c) ensure your cell phone’s bluetooth feature is activated. Plea...
Page 15: Product Specifications:
The bluetooth headset is compliant with and adopts the bluetooth specification 1.2. However, interoperability between the device and other bluetooth-enable products is not guaranteed because it depends on compatibility. For more information on the compatibility between devices with other bluetooth-e...
Page 16
Power consumption difference of various phones. Standby time : up to 120 hrs. Headset dimension/weight: l 72mm x w 26mm x h 16.5mm; 18g..