1. DL manuals
  2. Icom
  3. Transceiver
  4. IC-F310
  5. Instruction Manual

Icom IC-F310 Instruction Manual

Other manuals for IC-F310: Service Manual
Manual is about: vhf fm transceiver

Summary of IC-F310

  • Page 1

    Instruction manual vhf transceiver uhf transceiver this device complies with part 15 of the fcc rules. Operation is subject to the condition that this device does not cause harmful interference. If320 if310 if410 if420 ic-f310(new) 02.3.23 1:34 pm ページ18.

  • Page 2

    I r warning! Never connect the transceiver to an ac outlet. This may pose a fire hazard or result in an electric shock. Never connect the transceiver to a power source of more than 16 v dc such as a 24 v battery. This connection will ruin the transceiver. Never cut the dc power cable between the dc ...

  • Page 3

    Ii table of contents important ........................................................................ I explicit definitions ..................................................... I cautions .......................................................................... I table of contents ................

  • Page 4: Panel Description

    1 1 panel description ■ front panel microphone connector (p. 2) programmable function keys [p0],[p1],[p2],[p3] (p. 3) power switch (p. 2) function display (p. 2) ch up/down keys [ ] / [ ] (p. 3) volume up/down keys (p. 2) ic-f310(new) 02.3.23 1:33 pm ページ1.

  • Page 5: Function Display

    1 panel description 2 volume up/ down keys push to adjust the audio output level. • minimum audio level is pre-programmed. Ch up/down [ ] / [ ] keys • push to select the operating channel. • can be programmed for one of several functions by your- dealer. Power switch turns the power on and off. • th...

  • Page 6: Programmable Function Keys

    1 3 panel description priority channel keys select priority a or priority b channel with each push. Bank key select a bank (a group of 16 channels). • when the optional ut-105 is installed, push one or more times to select a channel bank for conven- tional channels or smartrunk ii™ channels. Scan st...

  • Page 7

    1 lock key electronically locks all programmable keys except the following: • [ call ] (incl. Cal a and cal b), [ moni ] and [ emer ] keys. Monitor key activates one of (or two of) the following functions on each channel independently: • push and hold the key to unmute the channel (audio is emitted;...

  • Page 8

    1 panel description 5 tx code key select a transmit 5-tone code (station code) channel. • push and hold to changes the contents of the sta- tion code using [ ] / [ ] keys. • push to selects a tx 5-tone code channel using [ ] / [ ] keys after pushing this key. Tx code channel up/down key push to sele...

  • Page 9: Channel Selection

    ■ channel selection several types are available, and the channel selection method may differ according to your system set up. Non-bank type: push the [ ] / [ ] keys to select the desired operating channel, in sequence; or, push one of the [ ch 1 ] to [ ch 4 ] keys to select these channels directly. ...

  • Page 10: Receiving and Transmitting

    ■ receiving and transmitting receiving: q push [ k i ] to turn the power on. W push [ ] / [ ] to select a channel. E when receiving a call, adjust the volume [up] or [down] to a comfortable listening level. Transmitting: r take the microphone off hook. • 5-tone mute may be released (the ‘audible’ co...

  • Page 11

    2 operation 8 d tx code channel selection if the transceiver has a [ tx ch ] key, display can be toggled between the operating channel number (or name) and tx code channel number (or name). When the tx code channel number (or name) is displayed, the [ ] / [ ] keys select the tx code channel. To sele...

  • Page 12: Connection and Maintenance

    Connection and maintenance 3 9 ■ rear panel and connection antenna red: + black: _ supplied dc power cable optional speaker (sp-10) optional cable (opc-617) t q w e r ic-f310(new) 02.3.23 1:33 pm ページ9.

  • Page 13: Supplied Accessories

    3 connection and maintenance 10 ⁄ antenna connector connects to an antenna. Ask your dealer about antenna selection and placement. (see p. 12) ¤ microphone hanger connect the supplied microphone hanger to the vehicle’s ground for on/off hook microphone functions. (see p. 2) ‹ dc power receptacle con...

  • Page 14: Mounting The Transceiver

    ■ mounting the transceiver the universal mounting bracket supplied with your transceiver allows overhead mounting. Please read the following instruc- tions carefully. • mount the transceiver securely with the 4 supplied screws to a thick surface which can support more then 1.5 kg. 3 connection and m...

  • Page 15: Antenna

    3 connection and maintenance 12 ■ antenna a key element in the performance of any communication sys- tem is an antenna. Ask your dealer about antennas and the best places to mount them. ■ fuse replacement two fuses are installed in the supplied dc power cable. If a fuse blows or the transceiver stop...

  • Page 16: Smartrunk Ii™ And

    Optional smartrunk ii™ operation 4 13 ■ smartrunk ii™ and conventional modes this transceiver is capable of smartrunk ii™ functions. The optional ut-105 allows communication in conventional channels or smartrunk ii™ channels. Select a channel bank for smartrunk ii™ before trunking operation. • push ...

  • Page 17

    4 optional smartrunk ii™ operation 14 d terminating a call after completing a call, push [#] to disconnect (hang up). Important: if one person in the conversation terminates a call, all participants will be cut off. D last number redial push [ m ], [ m ] to automatically redial the last number calle...

  • Page 18

    4 optional smartrunk ii™ operation 15 d clear channel alerting if all channels are busy, the transceiver automatically begins searching for an open channel and beeps every ten seconds. When two short beeps (low-pitched, then high-pitched) are heard, a channel is available. Push [ m ], [ m ] immediat...

  • Page 19: Options

    5 external speakers sp-5 large speaker for good audio quality. Input impedance: 4 Ω max. Input power: 5 w sp-10 compact and easy-to-install. Input impedance: 4 Ω max. Input power: 5 w hm-100t/ta dtmf microphone. Hm-100 normal microphone. 16 options ut-96 5- tone unit provides 2-tone/5-tone signaling...

  • Page 20

    1-1-32 kamiminami, hirano-ku, osaka 547-0003 japan a-5458d-1ex- e printed in japan © 1997 by icom inc. Ic-f310(new) 02.3.23 1:34 pm ページ17.

  • Page 21: Declaration

    Declaration of conformity we icom inc. Japan 1-1-32, kamiminami, hirano-ku osaka 547-0003, japan kind of equipment: vhf transceiver this compliance is based on conformity with the following harmonised standards, specifications or documents: i) en300 279 v1.2.1(1999-02) (emc product standard) ii) en6...

  • Page 22

    Ce versions of the ic-f310/s which display the “ce” symbol on the serial number seal, comply with the essential requirements of the european radio and telecommunication terminal directive 1999/5/ec. This warning symbol indicates that this equipment operates in non-harmonised frequency bands and/or m...

  • Page 23: Declaration

    Declaration of conformity we icom inc. Japan 1-1-32, kamiminami, hirano-ku osaka 547-0003, japan kind of equipment: uhf transceiver this compliance is based on conformity with the following harmonised standards, specifications or documents: i) en300 279 v1.2.1(1999-02) (emc product standard) ii) en6...

  • Page 24

    Ce versions of the ic-f410/s which display the “ce” symbol on the serial number seal, comply with the essential requirements of the european radio and telecommunication terminal directive 1999/5/ec. ■ ■ ger ■ ■ ned ■ ■ ita ■ ■ aut ■ ■ bel ■ ■ gre ■ ■ gbr ■ ■ lux ■ ■ swe ■ ■ irl ■ ■ esp ■ ■ den ■ ■ f...