Icom IC-F43TR Instruction Manual - Transmitting A Call
10
4
PASSPORT OPERATION
N
Transmitting a call
D Group call
q
Push
[UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the Passport system channel or talk group in
which the group ID is pre-programmed.
w
7HILE PUSHING AND HOLDING
[PTT], speak into the micro-
phone at a normal voice level after a beep is emitted.
s )F AN ERROR BEEP IS EMITTED RELEASE
[PTT]. After a while, repeat
step w again.
s 4HE BEEP CAN BE TURNED /&& IN 5SER SET MODE
s 7HEN THE TRANSCEIVER IS OUT OF THE COMMUNICATION AREA h
v
DISAPPEARS AND h./ 36#v MESSAGE APPEARS
D Individual call
q
Push
[UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the Passport system channel or talk group in
which the MID (Mobile ID) is pre-programmed.
w
7HILE PUSHING AND HOLDING
[PTT], speak into the micro-
phone at a normal voice level after a beep is emitted.
s )F AN ERROR BEEP IS EMITTED RELEASE
[PTT]. After a while, repeat
step w again.
s 4HE BEEP CAN BE TURNED /&& IN 5SER SET MODE
s 7HEN THE TRANSCEIVER IS OUT OF THE COMMUNICATION AREA h
v
DISAPPEARS AND h./ 36#v MESSAGE APPEARS
e
To finish the conversation, push
[DOWN] to send the
h#LEAR $OWNv SIGNAL
D Selective call (DTMF call)
—Optional UT-108 is required—
q
Push
[UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the Passport system channel or talk group.
w
Push
[Send DTMF]— a DTMF encode channel appears.
e
Push
[UP] or [DOWN] to select the desired DTMF en-
code channel.
r
Push
[PTT] to transmit the selected DTMF code in the
selected DTMF channel.
s 0USH
[P0] to cancel the DTMF transmission.
D Phone call
(Available for 10-keypad version only)
q
Push
[UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the Passport system channel or talk group.
w
Push
[Phone request] to enable the phone call.
s h
v APPEARS
Appears
e
Push
[PTT] to connect the phone line.
s 4HE PROCEED TONE IS EMITTED AFTER CONNECTION TO THE PHONE LINE
r
7HILE PUSHING AND HOLDING
[PTT], enter the phone number
via the 10-keypad to make the call. Then release
[PTT].
t
Push
[PTT] to transmit; release to receive.
y
Push
[#] while pushing [PTT] to finish the communication.