1. DL manuals
  2. Icom
  3. Two-Way Radio
  4. IC-F50V
  5. Operating Manual

Icom IC-F50V Operating Manual

Other manuals for IC-F50V: Instruction Manual, Service Manual
Manual is about: VHF/UHF TRANSCEIVER

Summary of IC-F50V

  • Page 1

    Operating guide operating guide for ic-f50v/f60v series biis 1200 operation ! Og_biis_ic-f50v_0.Qxd 07.8.8 6:18 pm page a (1,1).

  • Page 2: Read All Instructions

    I important thank you for purchasing this icom radio. The biis 1200 system function is available for your ic-f50v/f60v series radio. Read all instructions carefully and completely before using the transceiver. Save this operating guide — this operating guide contains important operating instructions...

  • Page 3: Preparation

    1 1 preparation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ■ programmable function keys the following functions can be assigned to [p0] , [p1] , [p2] , [p3] , [red] , [ ] and [ ] programmable function keys. Consult your icom dealer or system operator for details concerning your transceivers ...

  • Page 4: Operation

    2 2 operation ■ default setting the following functions are assigned to each programmable key as the default. However, the assigned function can be changed by your dealer. Ask your dealer for details. [p0]; call : push to transmit a biis code when the se- lected channel is a msk channel. [p1]; digit...

  • Page 5: Receiving A Call

    3 2 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ■ receiving a call d d individual call q when an individual call is received; • beeps sound. • the transceiver vibrates depending on the setting. • “ ” appears and the mute is released. • “ ” appears or blinks depending on the setting....

  • Page 6: Group Call

    4 2 operation d d group call q when a group call is received; • beeps sound. • the transceiver vibrates depending on the setting. • “ ” appears and the mute is released. • “ ” appears or blinks depending on the setting. • the group id (or text) and the calling station id (or text) is displayed alter...

  • Page 7: — Queue Indication

    5 2 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 d d displaying the received call record — queue indication the transceiver memorizes the calling station id in the memory. Up to 3 calls can be memorized, and the oldest call record is erased when a 4th call is received. However, once ...

  • Page 8: Transmitting A Call

    6 2 operation ■ transmitting a call a total of 3 ways for code selection are available— selecting the call code from memory, entering the call code from the keypad and calling back from the queue channel record. D d using call memory q while in the standby condition, push [p1] (digital) to enter the...

  • Page 9

    7 2 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 d d calling back from the queue channel q while in the standby condition, push and hold [p1] (digital) for 1 sec. To enter queue memory channel selection mode. W push [ ]/[ ] to select the desired record. E push [p0] (call) or [ptt]* t...

  • Page 10: Direct Code Entry

    8 2 operation d d direct code entry q while in the standby condition, push [tx code enter] to enter the tx code edit mode. • code digit for editing blinks. W push [tx code enter] to select the desired digit to be edited. • digit for editing differs according to the setting. E set the desired digit u...

  • Page 11: Receiving A Message

    9 2 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ■ receiving a message d d receiving a status message q when a status message is received; • beeps sound. • the transceiver vibrates depending on the setting. • the calling station id (or text) and the status message is displayed altern...

  • Page 12: Receiving An Sdm

    10 2 operation d d receiving an sdm q when an sdm is received; • beeps sound. • the transceiver vibrates depending on the setting. • the calling station id (or text) and the sdm is displayed alternately, depending on the setting. W when the received sdm includes more than 8 characters, the message s...

  • Page 13: Received Message Selection

    11 2 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 d d received message selection the transceiver memorizes the received messages in the memory. Up to 6 messages for status and sdm, or 95 character sdm’s can be memorized. The oldest message is erased when the 7th mes- sage is received...

  • Page 14: Transmitting A Status

    12 2 operation ■ transmitting a status d d general the status message can be selected with the programmed text, and the message text is also displayed on the function display of the called station. Up to 24 status types (1 to 24) are available, and the status mes- sages 22 and 24 have designated mea...

  • Page 15: Transmitting An Sdm

    13 2 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ■ transmitting an sdm d d general the short data message, sdm, can be sent to an individual station or group stations. Also, 8 sdm memory channels are available and the messages can be edited via pc programming. D d transmitting an sd...

  • Page 16: Position Data Transmission

    14 2 operation ■ position data transmission when the optional opc-966 interface cable and a gps receiver is connected to the transceiver, the position (longitude and latitude) data can be transmitted automatically. Ask your dealer or system operator for connection details. The position data is trans...

  • Page 17: Printer Connection

    15 2 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ■ printer connection when the optional opc-966 interface cable is connected to the transceiver, a printer can be connected to print out the received sdm content and the id of the station who sent the message. Ask your dealer or system...

  • Page 18: Emergency Transmission

    16 2 operation ■ emergency transmission when [emergency] is pushed, an emergency signal is automatically transmitted for the specified time period. The status 22 (emergency) is sent to the selected id station, and the position data is transmitted after the emergency signal when a gps receiver is con...

  • Page 19: Biis Indication

    17 2 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ■ biis indication the following indications are available for the biis operation on an msk channel. Connect : individual/group call is successful. Ok : message (status or sdm) transmission is successful. Failed : no answer back is rec...

  • Page 20

    1-1-32 kamiminami, hirano-ku, osaka 547-0003, japan a-6604-2ex © 2007 icom inc. ! Og_biis_ic-f50v_0.Qxd 07.8.8 6:19 pm page 18 (1,1).