Icom IC-FR3100 Instruction Manual - Specifications And Options
6
15
SPECIFICATIONS AND OPTIONS
■ Specifications
Specifications are measured in accordance with EN 300 086.
D
D IC-FR3100
General
• Frequency coverage
: 150.000–174.000 MHz
• Channel spacing
: 12.5/25.0 kHz (Narrow/Wide)
12.5/20.0 kHz (Narrow/Middle)
• PLL channel step
: 5.0, 6.25 kHz
• Frequency stability
: ±1.0 kHz
• Number of channels
: Max. 32 channel
• Antenna connector
: Type-N
×2 (50 Ω)
• Operating temp. range
: –25°C to +55°C
• Power supply voltage
: 220–240 V AC (50/60 Hz)
13.2 V DC (negative ground)
• Current drain (at 13.2 V) : TX high (25 W)
10.0 A
Max. audio
2.0 A
Stand-by
1.0 A
• Dimensions :
410(W)
×110(H)×360(D) mm
(Projections not included)
• Weight (approx.)
: 12 kg
Transmitter
• RF output power
: 25 W
• Modulation system
: Variable reactance frequency
modulation system
• Max. frequency deviation : ±5.0 kHz (Wide),
±4.0 kHz (Middle),
±2.5 kHz (Narrow)
• Spurious emissions
: Less than 0.25 µW
• Adjacent channel power
: More than 70 dB
(Wide, Middle),
More than 60 dB (Narrow)
• Intermodulation attenuation : More than 40 dB
• Audio harmonic distortion : 3.0% typical
(at 1 kHz, 40% deviation)
• Microphone impedance
: 600
Ω (8-pin modular)
Receiver
• Receive system
: Double conversion
superheterodyne system
• Sensitivity (20 dB SINAD) : 0 dBµV (EMF) typical
• Intermediate frequencies : 1st; 31.65 MHz, 2nd; 455 kHz
• Adjacent channel selectivity : More than 70 dB
(Wide, Middle),
More than 60 dB (Narrow)
• Spurious response
: More than 70 dB
• Intermodulation
: More than 70 dB
• Audio output power
: 2.5 W typical at 10% distortion
with a 4
Ω load
• External speaker connector : 2-conductor 3.5 (d) mm (
1
⁄
8
") 4
Ω
D
D IC-FR4100
General
• Frequency coverage
: 400.000–430.000 MHz
(Depends on version)
450.000–480.000 MHz
• Channel spacing
: 12.5/25.0 kHz (Narrow/Wide)
12.5/20.0 kHz (Narrow/Middle)
• PLL channel step
: 5.0, 6.25 kHz
• Frequency stability
: ±1.0 kHz
• Number of channels
: Max. 32 channel
• Antenna connector
: Type-N
×2 (50 Ω)
• Operating temp. range
: –25°C to +55°C
• Power supply voltage
: 220–240 V AC (50/60 Hz)
13.2 V DC (negative ground)
• Current drain (at 13.2 V) : TX high (25 W)
12.0 A
Max. audio
2.0 A
Stand-by
1.0 A
• Dimensions :
410(W)
×110(H)×360(D) mm
(Projections not included)
• Weight (approx.)
: 12 kg
All stated specifications are subject to change without notice or obligation.