- DL manuals
- Icom
- Repeater
- iC-FR5000
- Instruction Manual
Icom iC-FR5000 Instruction Manual
Summary of iC-FR5000
Page 1
Instruction manual vhf dpmr repeater ifr5000 ifr6000 uhf dpmr repeater.
Page 2: Features
I forward thank you for purchasing this icom repeater. The ic- fr5000/ic-fr6000 vhf/uhf d pmr repeaters is de- signed and built with icom’s state of the art technol- ogy and craftsmanship. With proper care, this product should provide you with years of trouble-free opera- tion. We appreciate you mak...
Page 3
Ii precautions r warning high voltage! Never attach an antenna or internal antenna connector during trans- mission. This may result in an electrical shock or burn. R warning high voltage! Never install the antenna at any place that person touch the an- tenna easily during transmission. This may resu...
Page 4: Panel Description
1 panel description 2001 new 1 q internal speaker you can listen to received audio. W volume control [volume] (p. 7) rotate to adjust the audio output level. E selector dial [select] rotate to adjust the squelch threshold level or se- lect the operating channel. (depending on the pre- programmed set...
Page 5: Rear Panel
Q external speaker connector [sp] connect the optional sp-22. W receive antenna connector [rx] connect a receive antenna (impedance: 50 ˘ ) to receive signals. E accessory connector [acc] connects to the accessory connector. • see page 3 for accessory connector information. R dc power receptacle con...
Page 6
3 1 panel description d accessory connector q !3 !4 @5 specification description pin name pin no. Nc txd rxd rts cts nc gnd mod in disc out ext. D/a vcc ext. A/d nc gnd ext.I/o 15 ext.I/o 16 ext.I/o 17 ext.I/o 18 ext.I/o 19 data in ext.I/o 21 af out ext.I/o 23 ext.I/o 24 ext.I/o 25 1 2 3 4 5 6 7 8 9...
Page 7: Installation and Connections
2 4 installation and connections ■ unpacking after unpacking, immediately report any damage to the delivering carrier or dealer. Keep the shipping car- tons. For a description and a diagram of accessory equip- ment included with the repeater, see ‘supplied ac- cessories’ on page ii of this manual. ■...
Page 8: Front Panel Connection
■ front panel connection p 0 p 1 p 2 p 3 p 4 sm-25 desktop microphone (optional) microphone connector (front panel view) hm-152 hand microphone (optional) q i caution: do not short pin 1 to ground as this can damage the internal 8 v regulator. Dc voltage is applied to pin 1 for microphone operation....
Page 9: Power Supply Connection
6 2 installation and connections ■ power supply connection make sure the repeater’s power switch is turned off when connecting a dc power cable. R warning! Voltages greater than 16 v dc will damage the repeater. Check the source voltage be- fore connecting the power cable. ■ mounting the repeater d ...
Page 10: Receiving and Transmitting
■ receiving and transmitting d repeater operation ask your dealer for details of the repeater’s program- ming. ➥ when the power is turned on, the [pwr] indicator lights green. (p. 1) ➥ the [tx] and [busy] indicators light simultane- ously while transmitting or receiving a signal. • the [tx] indicato...
Page 11: Maintenance
4 8 maintenance problem possible cause solution ref. ■ troubleshooting the following chart is designed to help correct prob- lems which are not equipment malfunctions. If you are unable to locate the cause of a problem or solve it through the use of this chart, contact the near- est icom dealer or s...
Page 12: Options
5 9 options • sp-22 external speaker compact and easy-to-install. Input impedance : 4 ˘ maximum input power : 7 w • hm-152 hand microphone • sm-25 desktop microphone • ur-fr5000/ur-fr6000 channel extension modules • uc-fr5000 d pmr controller • ut-109r voice scrambler unit non-rolling type (maximum ...
Page 13
Memo.
Page 14
Memo.
Page 15
Memo.
Page 16
1-1-32 kamiminami, hirano-ku, osaka 547-0003, japan a-6980h-1ex-0a printed in japan © 2011 – 2014 icom inc. Printed on recycle paper with soy ink..