Icom IC-M1EURO V Instruction Manual - page 7
y CHANNEL UP/DOWN SWITCHES [Y
Y]/[Z
Z]
➥Push either switch to change the operating channel.
(pgs. 7–9)
➥Checks tag channels or changes scanning direction dur-
ing scan.
(p. 13)
➥Push either switch to change the setting during set
mode.
(p. 16)
u CHANNEL 16 SWITCH [16•C]
➥Selects channel 16 when pushed.
(p. 7)
➥Selects the call channel when pushed for 1 sec.
(p. 7)
➥Enters call channel write mode when the call channel is
selected, and this switch is pushed for 3 sec.
(p. 11)
i INTERNAL MICROPHONE
(p. 9)
o SPEAKER-MICROPHONE CONNECTOR [SP MIC]
Connects the optional speaker-microphone.
(p. 22)
!0 ANTENNA CONNECTOR
Connects the supplied antenna.
(p. 6)
!1 DIAL/CHANNEL GROUP SWITCH [DIAL•I/U]
➥Selects and changes the regular channels.
(p. 8)
➥Selects one of 2 regular channels in sequence when
pushed for 1 sec.
(p. 8)
• International and U.S.A. channels
(UK and Itarian ver-
sions only)
are available for regular channels.
!2 DUALWATCH/TRI-WATCH SWITCH [DW•TRI]
➥Starts dualwatch when pushed momentarily.
(p. 14)
➥Starts tri-watch when pushed for 1 sec.
(p. 14)
➥Stops dualwatch/tri-watch when either is activated.
(p. 14)
➥Enters comment writing condition when pushed while
pushing and holding [MONI].
(p. 15)
!3 SCAN SWITCH [SCAN•TAG]
➥Starts and stops normal or priority scan when tag chan-
nels are programmed.
(p. 13)
➥Sets the displayed channel as a tag
(scanned)
channel
when pushed for 1 sec.
(p. 13)
➥While turning power ON, clears all tag channels in the
selected regular channel group when pushed.
(p. 13)
➥Activates an optional voice scrambler function while
pushing [MONI].
(p. 10)
!4 TRANSMIT POWER/LOCK SWITCH [H/L•LOCK]
➥Changes high and low power when pushed.
(p. 9)
• Some channels are set to low power only.
➥While pushing [MONI], push this key to select extra low
power.
(p. 9: Not available for some versions)
➥Changes the lock function ON and OFF when pushed
for 1 sec.
(p. 8)
!56 INTERNAL SPEAKER
PANEL DESCRIPTION
3
2
IC-M1EURO V_3.qxd 03.5.9 17:00 Page 3 (1,1)