1. DL manuals
  2. Icom
  3. Repeater
  4. iFR5200H
  5. Instruction Manual

Icom iFR5200H Instruction Manual

Manual is about: VHF FM REPEATER, UHF FM REPEATER

Summary of iFR5200H

  • Page 1

    Instruction manual vhf fm repeater ifr5200h ifr6200h uhf fm repeater this device complies with part 15 of the fcc rules. Operation is subject to the condition that this device does not cause harmful interference..

  • Page 2

    I important read this instruction manual carefully before attempting to operate the re- peater. Save this instruction manual– this manual contains important safety and operating in- structions for the ic-fr5200h/ic-fr6200h vhf/uhf fm repeaters . Explicit definitions word definition rwarning! Persona...

  • Page 3

    Ii icom, icom inc. And the icom logo are registered trademarks of icom incorporated (japan) in japan, the united states, the united kingdom, germany, france, spain, russia and/or other countries. All other products or brands are registered trademarks or trademarks of their respective holders. Forwar...

  • Page 4

    Iii safety training information w arning your icom radio generates rf electro- magnetic energy during transmit mode. This radio is designed for and classi- fied as “occupational use only,” mean- ing it must be used only during the course of employment by individuals aware of the hazards, and the way...

  • Page 5

    Iv 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 safety training information avertissement votre radio icom produit une énergie électromagnétique de radiofréquen- ces (rf), en mode de transmission. Cette radio est conçue pour un «usage professionnel seulement» et classée comme tel, ce qui si...

  • Page 6: Panel Description

    1 1 panel description q internal speaker monitors received signals. W volume control [volume] (p. 7) adjusts the audio output level. E selector dial [select] rotate to adjust the squelch threshold level, select the operating channel. (depending on the pre- programmed condition.) r power indicator [p...

  • Page 7: Rear Panel

    2 1 panel description q accessory connector [acc] connects to the accessory connector. • see page 3 for accessory connector information. W external speaker connector [speaker] connect the optional sp-22 or sp-35/sp-35l. E receive antenna connector [rx] connects a receive antenna (impedance: 50 ø) an...

  • Page 8

    3 1 panel description d accessory connector q !3 !4 @5 specification description pin name pin no. Nc txd rxd rts cts nc gnd mod in disc out ext. D/a vcc ext. A/d nc gnd ext.I/o 15 ext.I/o 16 ext.I/o 17 ext.I/o 18 ext.I/o 19 data in ext.I/o 21 af out ext.I/o 23 ext.I/o 24 ext.I/o 25 1 2 3 4 5 6 7 8 9...

  • Page 9: Installation and Connections

    2 4 installation and connections n unpacking after unpacking, immediately report any damage to the delivering carrier or dealer. Keep the shipping car- tons. For a description and a diagram of accessory equip- ment included with the repeater, see ‘supplied ac- cessories’ on page i of this manual. N ...

  • Page 10: Rear Panel Connection

    N rear panel connection 5 2 installation and connections acc rx tx lan bus-2 bus-1 fuse fuse dc input speaker gnd + – ¬ ¬ ac outlet ac power cable dc power cable 13.8 v (at least 20a) black _ red + dc power supply connector pc console to an ethernet port hub [rx ant] (p. 4) external speaker sp-35/sp...

  • Page 11: Power Supply Connection

    6 2 installation and connections n power supply connection make sure the repeater’s power is turned off when connecting a dc power cable. Caution: voltages greater than 16 v dc will dam- age the repeater. Check the source voltage before connecting the power cable. N mounting the repeater d using the...

  • Page 12: Receiving and Transmitting

    N receiving and transmitting d repeater operation ask your dealer for details of the repeater’s program- ming. ➥ when the power is turned on, the [pwr] indicator lights green. (p. 1) ➥ the [tx] and [busy] indicators light simultane- ously while transmitting/receiving a signal. • the [tx] indicator l...

  • Page 13: Maintenance

    4 8 maintenance n troubleshooting the following chart is designed to help you correct problems which are not equipment malfunctions. If you are unable to locate the cause of a problem or solve it through the use of this chart, contact your nearest icom dealer or service center. 1 2 3 4 5 6 7 8 9 10 ...

  • Page 14: Options

    5 9 options • sp-35/sp-35l external speakers input impedance : 4 ø maximum input power : 7 w • hm-152 hand microphone • sm-26 desktop microphone • ut-109r voice scrambler unit non-rolling type (maximum 32 codes). • ut-110r voice scrambler unit rolling type (maximum 1020 codes). * the scrambler syste...

  • Page 15: Information

    6 10 information 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 • about voice coding technology the ambe+2™ voice coding technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of digital voice systems, inc. This v...

  • Page 16

    1-1-32 kamiminami, hirano-ku, osaka 547-0003, japan a-?????-?? Printed in japan © 2014 icom inc. Printed on recycle paper with soy ink..