IComfort IC1020 User Manual - page 6
4
• Sophisticated leg and foot massage.
• 15 airbags for a complete massage experience.
• 4 head rotating massage mechanism for smooth wrist movement simulation.
• Built-in MP3 player, USB Key, SD card amplifier and headphones with music
synchronization.
• The LCD backlit remote control indicates the type, speed, intensity and area
of the massage being performed.
• Power recline feature up to 165 degrees with separate recline/incline controls.
• Retractable footrest.
7. INSTALLATION
The ic1020 massage chair comes partly assembled.
• Assemble this massage chair according to the installation instructions provided
in this guide.
• Check the parts list carefully to make sure nothing is missing.
• Sitting in the massage chair before it is completely assembled could result
in permanent damage to the chair and personal injury.
This massage chair is equipped with a cord having a grounding conductor.
The AC connector must be plugged into an appropriate socket that is properly
installed and grounded.
If the massage chair fuse is burned out, please turn the chair off and unplug
the power. You can open the lid covering the fuse located in the switch box
at the bottom of the chair in the back.
A) Unplug the chair from the AC wall outlet.
B) Unscrew the fuse cover underneath and behind the chair.
C) Remove the fuse and replace it with an identical fuse type then screw back
the fuse cover.
You can call iComfort® at 1-866-967-7333 ext 227 if you need help.
CAUTION: Never substitute a missing part with one of your own. If a part is missing,
contact customer service at: 1-866-967-7333 ext 227