Icon Q Boundless E1 User Manual - Pairing Devices Using Nfc

8  

To pair your earphones:

1.  Make sure the earphones are charged. While the 

earphones are turned off, press and hold 

 until the 

indicator light flashes red and blue. The earphones are 

in pairing mode.

2.  The indicator light by the power button will flash red 

and blue rapidly. The earphones are in pairing mode. 

3.  Turn on your Bluetooth device and ensure its Bluetooth 

function is activated. You will find this option on most 

devices under Settings or Options.

4.  Follow your device’s instructions to search for Blue-

tooth devices. After a few seconds, your Bluetooth 

device will list the earphones as a discovered device. 

The earphones ID is “Boundless E1”.

5.  Select the Boundless E1 to pair the two devices. If asked 

for a passcode, enter “0000”.

6.  Your earphones will say that they are paired and the 

indicator light will flash blue intermittently. Your Blue-

tooth enabled device has been successfully connected.

D. 

PAIRING DEVICES USING NFC

If you have an NFC enabled device, you can take advan-

tage of the Boundless E1’s NFC function for easier and 

quicker pairing. NFC lets you pair devices almost instanta-

neously by simply tapping them together.

1.  Make sure the earphones are charged. Turn on the 

earphones.